All Products
Showing 61-80 of 98 products · 2 unavailable products hidden
12V Solenoid Valve 1/2
This 12V normally closed solenoid valve controls water flow through a 1/2″ (DN15) inlet and outlet. It remains closed when unpowered and opens when 12V is applied — no polarity distinction is required. Pair it with a Gravity Water Flow Sensor (1/2″) for real-time flow monitoring in automated syst...
Gravity: Laser PM2.5 Air Quality Sensor For Arduino
The Gravity Laser PM2.5 Air Quality Sensor uses laser scattering to measure suspended particulate matter concentrations in the air. It detects particles from 0.3 to 10 µm in diameter and outputs digital concentration data via a serial interface — ideal for building air quality monitors, weather s...
Gravity 3-Pin PH2.0 to DuPont Male Cable Pack 30cm
·
This pack includes ten 30 cm Gravity analogue sensor cables, each with a 3-pin PH2.0 plug on one end and DuPont male connectors on the other.The cables are compatible with breadboard and DuPont wire spacing, making them handy for connecting DFRobot analogue sensors to an IO Expansion Shield or IO...
KnowFlow Basic Water Monitoring Kit
·
Build a DIY water quality monitor for field studies, teaching or environmental projects with the KnowFlow Basic Kit. This Arduino-based kit measures two key water parameters: pH and electrical conductivity (EC).Data can be recorded automatically to a micro-SD card for later analysis, and the Blun...
Gravity:Digital Infrared Distance Sensor (10cm)
A compact digital infrared distance sensor from DFRobot's Gravity range, designed for edge detection and close-range proximity sensing. It detects objects within 1–10 cm and outputs a simple digital HIGH/LOW signal — perfect for preventing robots from falling off tables or down stairs. Connects ...
Infrared Distance Sensor Bracket
INTRODUCTIONA This bracket is designed for Gravity: Arduino Adjustable Infrared Distance Sensor which can be used for the obstacle avoidance or objection detection. It provides a easy installation of sensor on various robot platforms or other interactive media devi...
Gravity: Analog Dissolved Oxygen Sensor / Meter Kit For Arduino (Pre-Order)
Measure dissolved oxygen in water for aquaculture, environmental monitoring, natural science projects and general water-quality work. This DFRobot Gravity kit pairs a galvanic dissolved oxygen probe with an analogue signal converter board for easy use with Arduino and other microcontrollers that ...
Gravity: Offline Language Learning Voice Recognition Sensor for Arduino / Raspberry Pi / Python / ESP32 - I2C & UART
What is voice recognition? Voice recognition is a computer technology that recognizes and converts speech signals into editable text or operational commands through analysis. It allows people to interact with computers by speaking without using a mouse, keyboard, or other input devices. ...
Gravity: Analog Spear Tip pH Sensor / Meter Kit (for Soil and Food Applications)
The Gravity Spear Tip pH Sensor Kit is designed for measuring the pH of semi-solid materials such as wet soil, fruit, meat, and vegetables. The stainless steel spear tip protects the glass electrode and allows the probe to be pushed directly into soft materials — something standard pH probes cann...
Gravity: Haptic Motor Driver for LRA Motors
·
This Gravity haptic driver module is built for Linear Resonant Actuators (LRAs), turning simple I2C commands into crisp tactile feedback for interactive projects. It is powered by the TM6605 driver chip and supports LRA resonant frequencies from 140Hz to 220Hz.The module includes 44 built-in vibr...
Gravity: Analog TDS Sensor/Meter for Arduino
The Gravity Analog TDS Sensor is an Arduino-compatible kit for measuring Total Dissolved Solids (TDS) in water. TDS indicates how many milligrams of soluble solids are dissolved per litre — the higher the value, the less clean the water. This sensor outputs a 0–2.3V analog signal that can be read...
Gravity: URM09 Analog Ultrasonic Sensor
The DFRobot URM09 is an analog output ultrasonic distance sensor optimised for fast ranging and obstacle avoidance. With a maximum measurement rate of 30Hz, built-in temperature compensation, and a range of 2–500cm, it's a capable and easy-to-use sensor for robotics, automation, and detection pro...
Gravity: I2C HUB
This Gravity: I2C HUB module is designed to connect up to 8 I2C devices to a main-controller, which allows you easily to hook up multiple I2C devices in project building, for instance, use Gravity-4P I2C/UART sensor cable to connect with Gravity modules or use Jumper Wire to c...
Gravity: SCI DAQ Module with Screen (I2C)
The Gravity SCI DAQ Module is a multi-functional data acquisition module with a built-in 1.3-inch OLED screen for real-time sensor readings. It supports over 20 common sensor types including temperature, humidity, and barometric pressure — with automatic sensor recognition and a standardised I2C ...
Gravity: Linear / Analog Hall Effect Sensor with ±1200 GS Magnetic Field Range
·
##Introduction Gravity: Linear/Analog Hall Sensor is a high-precision device designed for measuring and monitoring magnetic field strength. Advanced Hall effect circuitry at the core converts magnetic induction strength directly into a voltage output. The sensor responds uniquely to magnetic fiel...
Gravity: Infrared Light Photo Interrupter Module (Wavelength 940nm)
·
##Introduction The Gravity: Photo Interrupter Module integrates a high-performance ITR9608 photoelectric switch. Its compact design and easy operation make it an ideal choice for electronic projects and applications. Whether for robotics, automation equipment, or counting systems, this module pro...
Gravity: Arduino EC (Electrical Conductivity) Sensor / Meter
The Gravity EC (Electrical Conductivity) Sensor measures the conductivity of aqueous solutions, providing an analogue output for Arduino and compatible microcontrollers. EC measurement is essential for monitoring water quality, nutrient levels in hydroponic systems, and soil salinity in agricultu...
Adafruit Chainable DS18B20 Extender Breakout - STEMMA JST PH 2mm
·
The Adafruit Chainable DS18B20 Extender Breakout makes it easy to connect multiple DS18B20 temperature sensors in a daisy chain using standard STEMMA JST PH 2mm cables. Each breakout includes screw terminal blocks for direct connection of DS18B20 sensors in TO-92 or waterproof cable form — no sol...
Gravity BMP581 Barometric Pressure & Temperature Sensor - I2C/UART
·
This compact Gravity module brings Bosch BMP581 pressure and temperature sensing to microcontroller projects that need stable altitude or environmental readings. It is designed for applications such as drone altitude hold, indoor navigation, weather logging and hiking altimeters.The board support...
Gravity: I/O Expansion Shield for Pyboard
The Gravity I/O Expansion Shield for Pyboard connects your Pyboard v1.1 to the DFRobot Gravity sensor and module ecosystem with colour-coded plug-and-play connectors. No soldering is required — simply plug Gravity-compatible sensors and modules into the clearly labelled ports. An onboard externa...
