All Products
Showing 21-40 of 80 products · 20 unavailable products hidden
TMAG5273 A1 3D Hall Effect Magnetometer Breakout
·
This breakout makes it easy to add 3D Hall-effect magnetic sensing to a microcontroller project. The TMAG5273 integrates independent X, Y and Z Hall-effect sensors with a 12-bit ADC, giving you magnetic measurements over I2C plus a built-in temperature sensor for basic temperature readings.It is ...
SparkPNT FPL Multi-Frequency RTK GNSS Receiver
·
The FP platform is a high-precision GNSS receiver system built around SparkFun’s modular Flex System, designed to be repairable, user-upgradeable and ready for long service life.This FPL version comes fully assembled with the Quectel LG290P module installed, delivering modern multi-frequency RTK ...
SparkPNT FPL-T RTK GNSS Receiver with Tilt Compensation
·
The SparkPNT FPL-T is a high-precision GNSS receiver built around SparkFun’s modular Flex System. It comes fully assembled with the Quectel LG290P module installed, ready for modern multi-frequency RTK positioning with Galileo HAS support.This FPL-T model adds an integrated IMU for tilt compensat...
SparkPNT FPM mosaic-X5 RTK GNSS Receiver
·
The FPM is a high-precision GNSS receiver in the SparkPNT FP family, built around SparkFun’s modular Flex System. This version is fitted with the Septentrio mosaic-X5 module and arrives fully assembled, ready for mission-critical positioning work with interference protection.Designed to be repair...
SparkPNT FPM-T GNSS Receiver with mosaic-X5 & Tilt Compensation
·
The FPM-T is a high-precision GNSS receiver in SparkFun’s SparkPNT FP family, built around the modular Flex System. This model is supplied fully assembled with the Septentrio mosaic-X5 module installed, ready for demanding positioning work.An integrated IMU provides tilt compensation, while the r...
SparkPNT FPX-T GNSS Receiver with Tilt Compensation
·
The FPX-T is a high-precision GNSS receiver in SparkFun’s SparkPNT FP family, built around the modular Flex System. It arrives fully assembled with the u-blox ZED-X20P module installed, giving you a ready-to-use positioning engine with sensor fusion support.This model adds an integrated IMU for t...
LSM6DS3TR-C 6-DoF Accelerometer + Gyro IMU Breakout
·
Add motion and orientation sensing to your project with this compact 6 Degree of Freedom IMU breakout built around the ST LSM6DS3TR-C. It combines a 3-axis accelerometer for measuring gravity and acceleration with a 3-axis gyroscope for measuring spin and twist.The breakout includes voltage regul...
CharliePlex LED Matrix Bonnet - 8x16 Red LEDs
·
Add a bright red 16x8 LED matrix to your Raspberry Pi with this Adafruit CharliePlex LED Matrix Display Bonnet. It sits on any Raspberry Pi computer with a 2x20 connector, giving you a compact grid of 128 charlieplexed LEDs for patterns, text and simple graphics.The built-in IS31FL3731 Charlieple...
AS5600 Magnetic Angle Sensor Breakout
·
Add rotational sensing without a mechanical connection using the AS5600 magnetic angle sensor. This breakout can sense a rotating north/south magnetic field up to 3mm away from the chip body, making it useful for frictionless rotary encoders and contactless potentiometer-style controls.Magnetic a...
Adafruit QMC5883P Triple-Axis Magnetometer
·
This compact breakout makes it easy to measure magnetic fields in three axes for compass, navigation and orientation projects. It is built around the QMC5883P, a magnetometer commonly used in quadcopter and robotics designs, and it can be paired with a 6-DoF accelerometer/gyroscope to help build ...
STCC4 + SHT41 CO2, Temperature & Humidity Sensor
·
This compact breakout combines the STCC4 CO2 sensor with a Sensirion SHT41 temperature and humidity sensor for convenient indoor air monitoring. The STCC4 measures true CO2 using a thermal conductivity method rather than estimating from VOCs, and the onboard SHT41 helps improve the CO2 measuremen...
Adafruit INA228 85V 20-bit I2C Power Monitor Breakout
·
This breakout brings the INA228 power monitoring chip out to an easy-to-use board for measuring DC current, bus voltage and calculated power on either the high side or the low side of a circuit. It combines a wide common-mode range of up to +85VDC with a 20-bit ADC, giving you precise readings fr...
TSSP77038 38kHz IR Demodulator Breakout
·
This breakout uses Vishay's TSSP77038 infrared demodulator to give you the raw demodulated output from a 38kHz IR signal, without the extra filtering used in typical remote-control receivers. That makes it a handy choice for reflective sensing, light barriers, fast proximity detection, and modula...
Little Bird Toucan 8 x APA102 RGB LED
The Little Bird Toucan is an smart RGB LED HAT designed for the Raspberry Pi!Based on the APA102, the Toucan packs 8 super-bright LEDs.Each of the LEDs are dimmable, and individually controllable (Raspberry Pi Rainbow LEDs anyone?)!You can use the Toucan for creating Raspberry Pi LEDs status i...
Adafruit CYBERDECK HAT for Raspberry Pi 400
·
The Adafruit CYBERDECK HAT is a GPIO extender for the Raspberry Pi 400 that lets you plug full-size HAT displays and add-on boards into the back of the Pi 400 at a convenient angle. It duplicates every GPIO pin from input to output, so your HATs work without any pin limitations. In addition to t...
![PowerBoost 1000 Charger - Rechargeable 5V Lipo USB Boost @ 1A [1000C]](/rails/active_storage/representations/redirect/BAh7BkkiC19yYWlscwY6BkVUewdJIglkYXRhBjsAVGkCIsxJIghwdXIGOwBUSSIMYmxvYl9pZAY7AEY=--0063d525f306a0166b4bf9f99eba9cd17e7b5d4e/BAh7BkkiC19yYWlscwY6BkVUewdJIglkYXRhBjsAVHsIOgtmb3JtYXQ6CXdlYnA6EnJlc2l6ZV90b19maXRbB2kCkAFpApABOgpzYXZlcnsHOgxxdWFsaXR5aVc6CnN0cmlwVEkiCHB1cgY7AFRJIg52YXJpYXRpb24GOwBG--f55be79df1f1b025f86d676a642df617e240cfbc/image_59bf303f-d541-4951-b179-afe9c9c154c2.jpg)
PowerBoost 1000 Charger - Rechargeable 5V Lipo USB Boost @ 1A [1000C]
·
The PowerBoost 1000C is a DC/DC boost converter with a built-in LiPo battery charger and smart load-sharing circuit. It takes any 3.7V LiIon/LiPoly battery and boosts the output to 5.2V for powering 5V projects like Arduino, Raspberry Pi, or BeagleBone — even while the battery is charging. The l...
Automation HAT
The Pimoroni Automation HAT is a versatile home automation and monitoring controller for the Raspberry Pi. It provides relays, analogue inputs, buffered digital inputs, and powered outputs — all 24 V tolerant — with indicator LEDs on every channel for at-a-glance status monitoring. Connects to t...
Explorer HAT Pro
Explorer HAT Pro adds a lot of useful tools to your Raspberry Pi.It has digital inputs and outputs, capacitive touch pads, croc. clip compatible pads, coloured LEDs, analog inputs, motor drivers, and a mini breadboard for prototyping your projectsGreat for little robots, games, science ...
Adafruit PiOLED - 128x32 Monochrome OLED Add-on for Raspberry Pi
·
The Adafruit PiOLED is a compact 128×32 monochrome OLED display that plugs directly onto your Raspberry Pi's GPIO header. At just 1 inch diagonal, it's the perfect status display for headless Pi projects — showing IP addresses, system stats, sensor readings, or custom graphics without needing a f...
Adafruit PiRTC - PCF8523 Real Time Clock for Raspberry Pi
·
The Adafruit PiRTC is a battery-backed real-time clock that plugs directly onto your Raspberry Pi's GPIO header, letting your Pi keep accurate time even when powered off. Built around the PCF8523 RTC with native Linux kernel support, it's ideal for data logging, time-stamping, alarms, and any pro...
