All Products

SKU: PI-COM2100

Our standoffs are engineered specifically to keep your Pi HAT or pHAT snug and supported on your Pi while also keeping the two boards separated. They're the perfect companion for any Pi HAT/pHAT combo. Contents 2 x 10mm M2.5 F-F standoff 4 x 6mm screw Raspberry Pi and ...

SKU: PL-1708

These premium jumper wires are stranded 26 AWG wires with male terminations on both ends, for use with 0.1″ (2.54 mm) female headers, connectors, and solderless breadboards. The assortment of 3″ (7.5 cm) wires includes five each of ten different colors.

SKU: AF-2314 · MPN: 2314

The Adafruit Perma-Proto HAT for Pi Mini Kit with EEPROM is a full-sized prototyping daughter board for any Raspberry Pi with a 2×20 GPIO header. It provides a grid of 0.1″ soldering holes connected in a familiar breadboard pattern, plus a pre-soldered 24C32 I2C EEPROM for self-identifying HAT co...

SKU: AF-4475 · MPN: 4475

A complete kit for building a network-wide ad blocker using Pi-hole on a Raspberry Pi Zero WH. Pi-hole acts as a DNS server on your network — when a device requests an ad server address, Pi-hole returns nothing, blocking the ad before it even loads. Works with computers, tablets, and phones, even...

SKU: AF-2455 · MPN: 2455

The Adafruit PiTFT 2.4" HAT Mini Kit is a compact colour touchscreen display that plugs directly onto your Raspberry Pi's GPIO header. Featuring a 2.4-inch 320×240 pixel TFT with 16-bit colour and a resistive touch overlay, it's ideal for building interactive interfaces, mini consoles, or portabl...

SKU: AF-2396 · MPN: 2396

This 7" HDMI display with resistive touchscreen delivers 1024×600 resolution in a compact form factor ideal for Raspberry Pi, BeagleBone Black, and other single-board computers. The included mini driver board is powered via USB and accepts HDMI input for high-quality video output. The kit also i...

SKU: AF-2109 · MPN: 2109

Yes, this is a cute little 5" TFT display with WVGA 800x480 resolution and it has a resistive touchscreen overlay.  And yes it comes with an equally cute little driver board and USB-enabled 40-pin to 50-pin touchscreen adapter board. We tried to get the smallest display that would be good...

SKU: AF-3255 · MPN: 3255

A bundle of 12 jumper wires with a mini alligator clip on one end and a male header pin on the other. These are ideal for connecting sewable electronics (Flora, Gemma, micro:bit, Circuit Playground) and other non-header-friendly boards to a breadboard for prototyping. Key Features 12-Piece Set...

SKU: AF-2300 · MPN: 2300

Yes, this is a 7" TFT display with 1024x600 resolution and a cute little driver board. We tried to get the best medium-size display that would be good for embedded computing usage and at a good price. And we also tried to match it with a small driver board that can be powered from a USB p...

SKU: ET-2461033

This is an 8GB micro SDHC card that is pre-installed with the NOOBS operating system for the Raspberry Pi Model 2 B. NOOBS is actually a system image with SIX different Linux based operating systems used to run on the Raspberry Pi, Archlinux, OpenELEC, Pidora, RaspBMC, Raspbian and RiscOS. This l...

SKU: AF-3160 · MPN: 3160

For all those who feared their Game Boy playing days would be but a memory, worry no more! That handheld may be dead, but with this pack you'll have a chance to revive it. We've collected all the right parts so you can assemble the guts of your very own DIY GameGRRL - a portable...

SKU: AF-2298 · MPN: 2298

Is this not the cutest little display for the Raspberry Pi? It features a 2.8" display with 320x240 16-bit color pixels and a resistive touch overlay. The plate uses the high speed SPI interface on the Pi and can use the mini display as a console, X window port, displaying images or video...

SKU: AF-2423 · MPN: 2423

The Adafruit PiTFT Plus 2.8" Capacitive Touchscreen is a finger-friendly colour display for the Raspberry Pi. Unlike resistive touchscreens that need a stylus or fingernail, this capacitive version responds to a light finger touch and features a polished black bezel with a glass overlay for a cle...

SKU: AF-1933 · MPN: 1933

A 7" TFT display with 800×480 (WVGA) resolution and a compact HDMI mini driver board. Simply connect the USB power cable to a 5V supply and plug in an HDMI source for instant video output — no complex configuration required. The display uses the AT070TN94 panel and is driven by a small HDMI driv...

SKU: AF-1928 · MPN: 1928

Yes, this is a cute little 5" TFT display with WVGA 800x480 resolution and a cute little driver board. We tried to get the smallest display that would be good for embedded computing usage and at a good price. And we also tried to match it with a small driver board that can be powered from a US...

SKU: YH-6000300078

This high-quality T-shape expansion board allows you to connect the Raspberry Pi GPIO port for breadboard experiments. We will provide a 40Pin soft cable for you to connect the Raspberry Pi board to the breadboard.Feature Specifically designed for Raspberry Pi 4B/3B, Raspberry Pi 2B, Raspberry Pi...

SKU: AF-2395 · MPN: 2395

A 7-inch touchscreen display with 1024×600 resolution and a resistive touchscreen overlay, ideal for Raspberry Pi projects, embedded computing, and multimedia setups. The included driver board supports HDMI, VGA, and composite (NTSC/PAL) inputs, making it compatible with a wide range of devices. ...

SKU: AF-2299 · MPN: 2299

Make a lovely video setup with a 7" screen at 1024x600 resolution. For this model, we tried to get an inexpensive 1024x600 display that was still high quality and would be good for embedded computing usage. The visible display measures 7" diagonal and is a 'raw TTL' display. We include a drive...

SKU: AF-1678 · MPN: 1678

Yes, this is a cute little 5" TFT display with WVGA 800x480 resolution (NOT TOUCHSCREEN). We tried to get the smallest display that would be good for embedded computing usage and at a good price. The visible display measures 5" diagonal and is a 'raw' TTL display as is used in portable electro...

SKU: AF-1934 · MPN: 1934

This 7" TFT display delivers 800×480 resolution with an extra-bright backlight and a versatile driver board that accepts HDMI, VGA, and composite (NTSC/PAL) video inputs. Simply connect a 5–12V DC power adapter and plug in your video source — the driver auto-detects the active input and displays ...