All Products
AI Overview
For a STEMMA QT setup you’ll typically want a 4-pin JST-SH (1.0mm pitch) to JST-SH cable (Qwiic/STEMMA QT compatible). Pick a length that fits your build:
Standard STEMMA QT / Qwiic JST-SH to JST-SH cables
- STEMMA QT / Qwiic JST SH 4-Pin Cable (50mm) ($2.15)
- JST SH 4-Pin Cable - Qwiic Compatible - 100mm Long (100mm) ($2.15)
- STEMMA QT / Qwiic JST SH 4-Pin Cable - 200mm Long (200mm) ($2.80)
- STEMMA QT / Qwiic JST SH 4-Pin Cable - 300mm long (300mm) ($2.85)
- STEMMA QT / Qwiic JST SH 4-Pin Cable - 400mm long (400mm) ($3.25)
To plug a STEMMA QT device into 0.1" headers/breadboard
- STEMMA QT / Qwiic JST SH 4-pin Cable with Premium Female Sockets - 150mm Long (JST-SH to female sockets, 150mm) ($2.25)
- JST SH 4-Pin to Premium Male Headers Cable - Qwiic Compatible - 150mm Long (JST-SH to male headers, 150mm) ($2.25)
- Adafruit Qwiic / Stemma QT Breakout Board (breaks out JST-SH to 0.1" pins) ($4.00)
Adapters (if you’re bridging ecosystems)
- 4-pin JST PH to JST SH Cable - STEMMA / Grove to QT / Qwiic - 200mm long (STEMMA/Grove JST-PH ↔ QT/Qwiic JST-SH, 200mm) ($2.15)
- Grove to STEMMA QT / Qwiic / JST SH Cable - 100mm long (Grove ↔ JST-SH, 100mm) ($4.15)
- Qwiic Cable - Grove Adapter (150mm) (Qwiic ↔ Grove, 150mm) ($4.95)
Showing 81-100 of 100 products
JST-PH 2-pin Jumper Cable - 100mm long
·
We use 2 pin JST PH connectors for all our battery packs, and if you want to put a board in series, like our LC709203F Stemma QT battery gauge, this cable will be very handy! Both ends have a JST PH 2mm pitch 2-pin plug. Between the two, 100mm of color coded wire - red for power, black for gro...
STEMMA QT / Qwiic JST SH 4-Pin Cable - 300mm long
·
This 300 mm (11.8") 4-wire cable is fitted with JST-SH female 4-pin connectors on both ends. The 1 mm pitch JST-SH connectors are more compact than the chunkier 2 mm pitch JST-PH, while still providing a secure latching connection that is easy to insert and remove. Compatible with both STEMMA QT...
Adafruit FeatherWing 128x64 OLED Add-on
·
Add a crisp monochrome display and simple user controls to your Feather project with this fully assembled FeatherWing. It combines a 128x64 white OLED screen with three user buttons labelled A, B and C, plus a reset button, so you can build compact menus, status displays, and handheld interfaces ...
STEMMA QT / Qwiic JST SH 4-Pin Cable
·
This 4-wire cable is 50mm / 1.9" long and fitted with JST SH female 4-pin connectors on both ends. Compared with the chunkier JST PH these are 1mm pitch instead of 2mm, but still have a nice latching feel, while being easy to insert and remove. This cable can be used with Qwiic or STEMMA ...
STEMMA QT / Qwiic JST SH 4-pin Cable with Premium Female Sockets - 150mm Long
·
This 4-wire cable is a little over 150mm / 6" long and fitted with JST-SH female 4-pin connectors on one end and premium female headers on the other. Compared with the chunkier JST-PH these are 1mm pitch instead of 2mm, but still have a nice latching feel, while being easy to insert and remove.Th...
STEMMA QT / Qwiic JST SH 4-Pin Cable - 200mm Long
·
This 4-wire cable is a little over 200mm / 7.8" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH these are 1mm pitch instead of 2mm, but still have a nice latching feel, while being easy to insert and remove.This cable can be used with Qwiic or S...
STEMMA QT / Qwiic JST SH 4-Pin Cable - 400mm long
·
This 4-wire cable is a little over 400mm / 15.7" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH these are 1mm pitch instead of 2mm, but still have a nice latching feel, while being easy to insert and remove. This cable can be used with Qwiic bo...
Adafruit NAU7802 24-Bit ADC - STEMMA QT / Qwiic
·
The Adafruit NAU7802 is a high-resolution 24-bit differential ADC breakout designed specifically for reading strain gauges, load cells, and other Wheatstone bridge sensors. With built-in gain amplification and calibration circuitry, it converts the tiny voltage changes from bridge sensors into pr...
Adafruit MPU-6050 6-DoF Accel and Gyro Sensor - STEMMA QT Qwiic
·
The Adafruit MPU-6050 breakout combines a 3-axis accelerometer and 3-axis gyroscope in a single compact sensor, providing 6 degrees of freedom (6-DoF) motion sensing over I2C. A proven and popular IMU, the MPU-6050 is ideal for detecting orientation, movement, and rotation in robotics, wearables,...
Adafruit MS8607 Pressure Humidity Temperature PHT Sensor - STEMMA QT / Qwiic
·
The Adafruit MS8607 is a factory-calibrated 3-in-1 sensor that measures barometric pressure, relative humidity, and temperature over I2C. Made by TE Connectivity, this PHT (Pressure, Humidity, Temperature) sensor is a compact, all-in-one solution for weather stations, environmental monitoring, an...
Adafruit MPR121 12-Key Capacitive Touch Sensor Gator Breakout - STEMMA QT / Qwiic
·
The Adafruit MPR121 Gator Breakout adds 12 capacitive touch inputs to any microcontroller project — no soldering required. With large alligator/croc-clip friendly pads and STEMMA QT / Qwiic connectors, simply clip conductive materials to the pads and plug into your board's I2C port. The MPR121 h...
Adafruit MSA311 Triple Axis Accelerometer - STEMMA QT / Qwiic
·
The Adafruit MSA311 is a compact, low-cost triple-axis accelerometer with 14-bit resolution and a rich set of built-in motion detection features. Very similar to the MSA301 but with an updated I2C address (0x62 instead of 0x26), it includes tap/double-tap detection, orientation sensing, freefall ...
Adafruit Monochrome 1.12" 128x128 OLED Graphic Display
·
The Adafruit Monochrome 1.12" OLED Display packs a 128×128 pixel resolution into a compact screen with the high contrast and crisp readability that OLED technology is known for. Each of the 16,384 white pixels is individually addressable, producing sharp text and graphics with no backlight requir...
I2C to 8-Channel Solenoid Driver
·
This driver board makes it much easier to control multiple solenoids from a microcontroller over I2C. It uses an MCP23017 GPIO expander so you do not need to dedicate lots of pins just to switch a bank of clicky, inductive loads.Solenoid power connects through the centre terminal blocks, with eac...
AS7331 UVA/UVB/UVC Sensor Breakout
·
This compact board makes it easy to measure ultraviolet light across three separate bands, giving you independent UVA, UVB and UVC readings instead of a single combined value. That makes it a strong fit for human and agricultural UV monitoring, as well as UVC-focused applications such as germicid...
LSM6DS3TR-C 6-DoF Accelerometer + Gyro IMU Breakout
·
Add motion and orientation sensing to your project with this compact 6 Degree of Freedom IMU breakout built around the ST LSM6DS3TR-C. It combines a 3-axis accelerometer for measuring gravity and acceleration with a 3-axis gyroscope for measuring spin and twist.The breakout includes voltage regul...
STCC4 + SHT41 CO2, Temperature & Humidity Sensor
·
This compact breakout combines the STCC4 CO2 sensor with a Sensirion SHT41 temperature and humidity sensor for convenient indoor air monitoring. The STCC4 measures true CO2 using a thermal conductivity method rather than estimating from VOCs, and the onboard SHT41 helps improve the CO2 measuremen...
Adafruit ISO1540 Bidirectional I2C Isolator - STEMMA QT / Qwiic
·
This compact breakout provides electrical isolation between two sides of an I2C bus, helping separate earth-grounded circuits, reduce noise, or protect sensitive low-voltage monitoring equipment from faults cascading across the bus.The ISO1540 is fully bidirectional, supports clock stretching, an...
AS5600 Magnetic Angle Sensor Breakout
·
Add rotational sensing without a mechanical connection using the AS5600 magnetic angle sensor. This breakout can sense a rotating north/south magnetic field up to 3mm away from the chip body, making it useful for frictionless rotary encoders and contactless potentiometer-style controls.Magnetic a...
Adafruit PCA9546 4-Channel STEMMA QT / Qwiic I2C Multiplexer
Need to use multiple I2C devices that share the same address? The PCA9546 4-Channel STEMMA QT / Qwiic I2C Multiplexer lets you connect up to four same-address I2C devices with completely solderless wiring. Five JST SH connectors (1 input + 4 outputs) make it plug-and-play with any STEMMA QT or Qw...