All Products
Showing 81-100 of 100 products
RTK Facet Connector Assembly v12 Replacement Part
·
This connector assembly is a replacement part for repairing a SparkFun RTK Facet or RTK Facet L-Band. It is intended for users who are comfortable opening and servicing their device.The assembly is supplied for repair work rather than general prototyping or GNSS development. If you need a high-pr...
Digi XBee Cellular Kit
·
Start prototyping low-power cellular IoT projects with a kit built around Digi XBee Cellular and the Qwiic Connect System. It brings together the core board, cellular module, sensor, SIM, antennas and cables needed to begin collecting data beyond normal Wi-Fi range.The included SparkFun Digi XBee...
Gravity: IIC to Dual UART Module
The Gravity IIC to Dual UART Module converts a single I2C connection into two independent hardware serial ports. Each sub-UART has its own 256-byte FIFO buffer for transmitting and receiving, with individually configurable baud rate, word length, and parity settings. Most controller boards like ...
SparkFun microSD Shield
The SparkFun microSD Shield gives your Arduino mass-storage capability via a microSD card slot, making it ideal for data-logging and projects that need to read or write files. Communication with the microSD card uses the SPI interface. The SCK, DI, and DO pins connect to the ATmega168/328's stan...
SparkFun Weather Shield
The SparkFun Weather Shield is an easy-to-use Arduino shield that grants you access to barometric pressure, relative humidity, luminosity and temperature. There are also connections on this shield to optional sensors such as wind speed, direction, rain gauge and GPS for location and super accu...
SparkFun MicroMod Asset Tracker Carrier Board
The SparkFun MicroMod Asset Tracker Carrier Board provides you with a toolkit to monitor and track the location of your assets. Built around the u-blox SARA-R510M8S module, the asset tracker offers Secure Cloud LTE-M and NB-IoT data communication for multi-regional use and has an integrated u-blo...
SparkFun MicroMod Cellular Function Board - Blues Wireless Notecarrier
The SparkFun MicroMod Cellular Function Board adds cellular connectivity to the MicroMod ecosystem using the Blues Wireless Notecard (NOTE-NBGL-500). The Notecard includes a built-in SIM card with a 10-year data plan and 500MB of data, covering over 140 countries — no separate carrier contract re...
Pi STEMMA QT Breakout for Raspberry Pi
·
This compact breakout adds a 4-pin JST SH connector to a Raspberry Pi or compatible board, giving you a quick STEMMA QT/Qwiic connection for I2C sensors and devices. The 2x3 socket plugs onto the Pi’s I2C and power pins with no soldering required, so it is easy to fit and remove when you need it....
Adafruit USB-C Power Delivery Dummy Breakout - I2C or Fixed
·
This breakout is built around the HUSB238 USB PD sink chip, making it easy to negotiate power from a USB Type-C Power Delivery source without soldering tiny resistors. It plugs into a USB-C cable and uses the CC lines to request a suitable PD voltage.You can configure it with solder jumpers for f...
QSPI DIP Breakout Board - W25Q128 128Mbit 16MB
·
This breakout makes it easier to prototype with external QSPI flash memory, as used by many modern microcontrollers such as RP2040, ESP32, RT10xx and STM32 series devices. It carries a W25Q128JVSSIQ flash chip, giving you 128 Megabits / 16 Megabytes of extra storage for code and resources.The boa...
Sunken USB Type-C Breakout Board
·
This compact breakout is made for slim USB-C projects where a standard horizontal or vertical connector would sit too high. Its sunken Type-C connector straddles the PCBA, helping keep your build low profile while still breaking out the contacts you need.USB-C gives you a reversible connector, ex...
PB86 Step Switch Breadboard Breakout PCB (Pack of 12)
·
This break-apart panel gives you 12 PB86 step switch breakout PCBs, making these colourful sequencer-style switches much easier to use in a breadboard, perfboard or DIY synth build.The original switches are not breadboard or perfboard friendly, so these assembled breakouts save you from hand-wiri...
TMAG5273 A1 3D Hall Effect Magnetometer Breakout
·
This breakout makes it easy to add 3D Hall-effect magnetic sensing to a microcontroller project. The TMAG5273 integrates independent X, Y and Z Hall-effect sensors with a 12-bit ADC, giving you magnetic measurements over I2C plus a built-in temperature sensor for basic temperature readings.It is ...
LIS3DH Micro Triple Axis Accelerometer Breakout (Qwiic)
·
This ultra-small Qwiic-enabled breakout adds three-axis acceleration sensing to compact projects using the LIS3DH, a smart, low-power capacitive micro-machined accelerometer with 12-bit resolution. It can be used for translation detection and is classified as a 3DoF, or 3 Degrees of Freedom, sens...
LM66200 Dual Ideal Diode Breakout
·
This compact Adafruit breakout helps manage two power inputs in a small project, such as a battery, USB supply or DC wall adaptor. It uses the LM66200 dual ideal diode IC to select the higher of two inputs while helping prevent back-powering.Connect your two 2–5V supplies to Vin1 and Vin2, and th...
ANO Rotary Navigation Encoder Breakout
·
This breakout makes the ANO rotary encoder wheel much easier to use in a breadboard or wired prototype. The encoder is a distinctive navigation control, with a clicky scroll-wheel feel reminiscent of early iPod interfaces.The board converts the encoder’s unusual pin set into a straightforward hea...
Triple Axis Accelerometer Breakout - LIS3DH with Headers
·
Add 3-axis motion sensing to your project with this LIS3DH accelerometer breakout from SparkFun. The LIS3DH is a low-power, capacitive micro-machined accelerometer with 12 bits of resolution, suitable for detecting translation, movement and orientation in 3DoF applications.The breakout is easy to...
A111 60GHz Pulsed Radar Breakout
·
Bring 60GHz radar sensing into your project with the Acconeer A111 single-chip pulsed coherent radar sensor on a SparkFun breakout board. It is suited to high-precision distance measurement, and also supports gesture, motion, material and speed-detection applications at distances up to two metres...
USB 2.0 USB-C Connector Breakout Board
·
USB-C is handy for modern projects, but its 24 tiny, tightly spaced pins are not friendly to hand soldering or quick prototyping. This breakout board routes the essential USB-C connections out to a standard 0.1" (2.54mm) pitch so you can work with them on breadboards, perfboards and other prototy...
Wireless Joystick Breakout Board for XBee
·
This breakout board makes it easier to build a custom wireless controller for XBee-based projects, without relying on a standard hobby RC transmitter. It is designed for makers who want to choose their own control layout for robots, vehicles and other radio-controlled builds.The board includes an...
