All Products

SKU: AF-5974 · MPN: ADA5974

The Adafruit HX711 Breakout is a high-resolution 24-bit differential ADC designed for reading load cells, strain gauges, and other Wheatstone bridge sensors. With selectable 64× or 128× gain on Channel A and fixed 32× gain on Channel B, it amplifies the tiny voltage changes from bending or twisti...

SKU: DF-DFR1184 · MPN: DFR1184

The Gravity 0–10V ADC Module is a high-precision dual-channel analogue-to-digital converter designed to interface industrial-grade 0–10V sensors with microcontrollers and Linux-based systems. Built on the Texas Instruments ADS1115, it delivers 15-bit resolution (0.375 mV per step) with ±2 mV accu...

SKU: AF-5046

The BME688 from Bosch delivers comprehensive environmental sensing in a single compact package. This precision sensor measures temperature, humidity, barometric pressure, and VOC gas levels, all accessible over I2C or SPI. The BME688 is a drop-in replacement for the BME680, adding a programmable...

SKU: PL-2739

The Pololu AltIMU-10 v5 is a compact inertial measurement unit (IMU) and altimeter that combines a gyroscope, accelerometer, magnetometer, and barometric pressure sensor on a single board. It provides ten independent measurements — pressure, 3-axis rotation, 3-axis acceleration, and 3-axis magnet...

SKU: AF-1361

This conductive material, also known as Velostat or Linqstat, is a handy addition to a wearable and sensor hacking toolkit. It is pressure-sensitive, so squeezing the sheet reduces its resistance, making it useful for experimenting with flexible handmade sensors.It can be used as a lower-cost alt...

SKU: AF-4538

The Adafruit NAU7802 is a high-resolution 24-bit differential ADC breakout designed specifically for reading strain gauges, load cells, and other Wheatstone bridge sensors. With built-in gain amplification and calibration circuitry, it converts the tiny voltage changes from bridge sensors into pr...

SKU: SF-GPS-28139 · MPN: GPS-28139

The SparkPNT GNSS Flex Module delivers centimetre-level RTK positioning using the Quectel LG290P receiver with quad-band support (L1, L2, L5, E6/L6) and multi-constellation tracking across GPS, GLONASS, Galileo, BDS, QZSS, and NavIC. With a built-in NIC anti-jamming unit and 1,040 tracking channe...

SKU: DF-SEN0371

The BMP388 Digital Pressure Sensor Module is a high-accuracy barometric pressure and temperature breakout based on the Bosch BMP388. It offers significantly improved performance over its predecessors (BMP180, BMP280) with lower power consumption, higher resolution, and faster sampling — making it...

SKU: WS-25553

A 3 MP camera module built around the SmartSens SC3336 sensor, designed for use with LuckFox Pico series boards. The 1/2.8" CMOS sensor delivers high-sensitivity, high-SNR imaging with strong low-light performance, making it well suited for surveillance, computer vision, and night-time monitoring...

SKU: AF-5971 · MPN: ADA5971

The Adafruit Chainable DS18B20 Extender Breakout makes it easy to connect multiple DS18B20 temperature sensors in a daisy chain using standard STEMMA JST PH 2mm cables. Each breakout includes screw terminal blocks for direct connection of DS18B20 sensors in TO-92 or waterproof cable form — no sol...

SKU: PR-PIM355

Sense the world around you with enviro:bit! It's loaded with sensors for air and weather, colour and light, and sound, and slots right onto your micro:bit. Just slot in your micro:bit, then code enviro:bit with the block-based Microsoft MakeCode editor, or with MicroPython in the Mu code ...

SKU: SF-SEN-17372

Passive Infrared (PIR) sensors are great for detecting motion in a small area around the sensor. The 170µA SparkFun EKMC4607112K PIR Breakout is a simple board equipped with an EKM-series PIR sensor from Panasonic®. The EKM-series PIR sensors are optimized for small movements to offer motion-sens...

SKU: SF-SEN-15901

This Weather Meter Kit provides the three core sensors for a DIY weather station: an anemometer (wind speed), a wind vane (wind direction), and a rain gauge. All three sensors use passive magnetic reed switches rather than active electronics, making them simple to interface with any microcontroll...

SKU: SF-SEN-17374

Passive Infrared (PIR) sensors are great for detecting motion in a small area around the sensor. The 170µA SparkFun EKMC4607112K Qwiic PIR uses an EKM-series PIR sensor from Panasonic® paired with an ATTiny84 to interact with it using I2C with the Qwiic system. The EKM-series PIR sensors are opti...

SKU: LB-LR0298

This stand alone DHT11 can read the temperature and humidity and send the information over a one wire, simplex serial bus. Arduino.cc provides a DHT11 library to aid in communicating with this module.**DHT11 Temperature and humidty sensor. Pinout:**- Ground- Not Used- Data- Vcc**Specifications...

SKU: SF-GPS-17722 · MPN: GPS-17722

Built around the u-blox ZED-F9P, this MicroMod carrier gives your project high-precision GNSS and RTK positioning in a swappable, solderless MicroMod format. It supports rover and base station operation, with RTK accuracy down to millimetre-level positioning when used with suitable correction dat...

SKU: SF-COM-23946

Passive Infrared (PIR) sensors are great for detecting motion in a small area around the sensor. This is an EKM-series PIR sensor from Panasonic®. The EKMB-series PIR sensors are optimized for small movements to offer motion-sensing options for battery powered applications due to the low standby ...

SKU: EF-EF05033 · MPN: EF05033

The ELECFREAKS PlanetX MQ5 Sensor is an essential sensor for environmental detection. The ELECFREAKS PlanetX MQ5 Sensor can be used to detect the leakage of flammable gas, you can use it to make a household gas leak alarm or a portable gas detector. PlanetX MQ5

SKU: SF-ROB-12629

The DAGU Wheel Encoder Kit is a simple add-on for wheeled robots that measures speed and distance travelled. Each kit includes two neodymium 8-pole magnets with rubber hubs and two hall-effect sensors, providing reliable rotational feedback for odometry and motion control. The sensors come pre-t...

SKU: EF-EF05041 · MPN: EF05041

The PlanetX Waterproof 18B20 Temperature Sensor is a sensor that senses temperature and converts it into a usable output signal. It is waterproof and can be used for temperature measurement. It is usually used for the detection of water temperature. SPECIFICATIONConnections: RJ11 4P4CPower S...