All Products

SKU: AF-1361

This conductive material (also known as "Velostat" or "Linqstat") is a nice addition for your wearable/sensor hacking toolkit. It's pressure-sensitive: squeezing it will reduce the resistance, so it's handy for making flexible sensors. And it's a lot less expensive than off-the-shelf pressure ...

SKU: DF-SEN0299

The RP-L-400 is a long, flexible thin-film pressure sensor with a 400 mm active length. It detects both static and dynamic pressure by converting applied force into a variable resistance — resistance decreases as pressure increases. The ultra-thin construction (0.35 mm) and fast response time mak...

SKU: DF-SEN0298

This is a circular flexible thin film pressure sensor of long legs with a diameter of 7.6mm, which can be used to realize highly sensitive detection of pressure. The sensor is durable and designed to sense static and dynamic pressure in a high respond speed. Its advantages of recording the intens...

SKU: DF-SEN0297

The RP-C7.6-ST is a circular flexible thin-film pressure sensor with a compact 7.6 mm active area and ultra-thin 0.3 mm profile. It converts applied force into a variable resistance — output resistance decreases as pressure increases — making it straightforward to read with any microcontroller's ...

SKU: DF-SEN0294

This is a circular flexible thin film pressure sensor of short legs with a diameter of 18.3mm, which can be used to realize highly sensitive detection of pressure. The sensor is durable and designed to sense static and dynamic pressure in a high respond speed. Its advantages of recording the inte...

SKU: LB-PT101011M-20

A 20-metre roll of 20mm wide copper foil tape with double-sided conductive adhesive. The low-resistance copper provides excellent conductivity for electrical projects, EMI shielding, paper circuits, and even garden slug deterrence. The tape is flexible enough to twist, bend, and tear to fit any s...

SKU: AF-1128

This Copper Foil Tape features a thin, pure copper construction with an electrically conductive adhesive backing. Extremely flexible and easy to work with, it can be cut to shape with scissors and soldered directly for reliable electrical connections. The conductive adhesive on the back makes it...

SKU: DF-SEN0293

The RP-L-170 is a long, flexible thin-film pressure sensor with a 170mm active area for detecting both static and dynamic pressure. As pressure is applied, the sensor's resistance decreases — making it easy to read with any analogue input on a microcontroller. Built from ultra-thin film with nan...

SKU: DF-SEN0616 · MPN: SEN0616

The Gravity: Thin-film Pressure Sensor measures pressure through the deformation of a flexible film material. As pressure increases, the film deforms, producing higher analog output values, while lighter pressure results in lower output. This sensor is an excellent educational tool for hands-on e...

SKU: AF-4607

Copper sheet can be an interesting addition to your toolbox. The sheet itself is made of thin pure copper so its extremely flexible and can take on nearly any shape. You can easily solder to it, and the material itself can carry current just like a wire. On the back is an electrically conducti...

SKU: DF-SEN0296

This is a square flexible thin film pressure sensor of short legs with a side length of 40mm, which can be used to realize highly sensitive detection of pressure. The sensor is durable and designed to sense static and dynamic pressure in a high respond speed. Its advantages of recording the inten...

SKU: DF-SEN0295

The RP-C18.3-LT is a circular flexible thin-film pressure sensor, 18.3mm in diameter, designed for highly sensitive detection of both static and dynamic force. When pressure is applied to the active area, resistance decreases proportionally — making it straightforward to interface with a microcon...

SKU: SF-SEN-09673

A compact force sensitive resistor (FSR) from Interlink Electronics with a 4 mm (0.16″) diameter active sensing area. The resistance changes based on applied pressure — from over 1 MΩ with no pressure down to approximately 2.5 kΩ at full force — making it easy to detect touch, squeeze, and weight...

SKU: AF-1127

Copper tape can be an interesting addition to your toolbox. The tape itself is made of thin pure copper so its extremely flexible and can take on nearly any shape. You can easily solder to it, and the tape itself can carry current just like a wire. On the back is an electrically conductive adh...

SKU: AF-1168

A silver-coloured woven conductive fabric made from copper and nickel-plated nylon. Highly conductive with a resistance of less than 1 Ω per 30 cm in any direction across the textile. Use it to create soft switches, plush keypads, capacitive touch sensors, and other textile interfaces for wearabl...

SKU: AF-3670

High-conductive heating fabrics are Literally! This non-woven fabric feels a little like felted paper but is filled with conductive material that can make the fabric emit heat when powered. Resistive heating fabrics safely deliver comfortable conductive and radiant heating at low voltage thr...

SKU: AF-1917

The Sensor Film Kit is a great new way to make custom-sized sensors out of force sensitive material. This kit includes one piece of black plastic sensor film (it's thicker and more durable than Velostat but similar in function), two pieces of heavy aluminum foil, and two pieces of clear adh...

SKU: LB-PT101011M

A 20-metre roll of 5 mm wide copper tape with conductive adhesive backing. The conductive adhesive ensures electrical continuity through the tape, making it ideal for creating low-profile circuit traces, RF shielding, antenna construction, and paper circuit projects. The narrow 5 mm width is wel...

SKU: SF-PRT-13828

A wide roll of copper tape with conductive adhesive backing. At 50.8 mm (2″) wide and 15.2 m (50 ft) long, this tape is suitable for creating low-profile traces, RF shielding, antenna construction, and paper circuit projects. The conductive adhesive ensures electrical continuity through overlappi...

SKU: DF-FIT0744 · MPN: FIT0744

This smooth stainless steel fibre thread lets you sew conductive paths into fabric for wearable electronics and soft-circuit projects. It offers low resistance, good thermal conductivity, a high melting point and high-temperature resistance.Each roll contains 15m of thread, with a wire resistance...