DFRobot
Gravity: Multifunctional Environmental Sensor
All Products
Breakouts
Gas & Air Quality Sensors
Humidity Sensors
New Arrivals
Pressure & Altitude Sensors
Sensors
Temperature Sensors
Data Loggers
Brands and Manufacturers
Environmental (temperature, humidity, air quality)
DFRobot
Sensors & Modules
Sensors & Input
Prototyping & Wiring
$52.20
|
In stock at supplier
This multifunctional environmental sensor comprises SHTC3 temperature & humidity sensor, BMP280 barometric pressure sensor, VEML7700 ambient light sensor, an...
Get notified when back in stock
Estimated Delivery
Arrives
Disclaimer
Secure checkout
This multifunctional environmental sensor comprises SHTC3 temperature & humidity sensor, BMP280 barometric pressure sensor, VEML7700 ambient light sensor, and ML8511 UV sensor into one and offers 5 kinds of environmental parameters.
Professional sensor chips are selected for each kind of parameter measurement. The reasonable layout and heat conduction of main chips are carefully considered in the circuit design, which effectively guarantees the accuracy of the data.
The product has an MCU processing chip onboard that converts the sensor raw data into values with the standard unit so you can directly use them. For instance, °C and °F for temperature, % for humidity, Kpa for barometric pressure, lx for light illuminance, and mw/m² for UV light.
The environmental sensor supports two communication methods(UART and I2C) and provides two versions: Gravity and Fermion(breakout), also complete Arduino and Python libraries are provided.
Exquisite and small, you can use it to make indoor and outdoor environmental monitoring systems, or for your environmental monitoring topics. This DFRobot environmental sensor can greatly simplify the wiring and codes of your project.
Connection for UART and I2C
Features
Gravity interface, no need to solder, plug and play
Switchable I2C and UART, two output modes
Highly integrated module, can test a variety of data at the same time (temperature, humidity, barometric pressure, altitude, ultraviolet intensity, ambient light intensity)
Reasonable layout and high precision
Applications
Home indoor and outdoor environment detection system
Environmental monitoring work
Specification
Working Voltage: 3.3~5V DC
Working Current: 45mA
Output Signal: I2C, UART
Working Temperature: -20~70°C
Product Size: 32mm×32mm / 1.26×1.26 inch
Mounting Hole Size: M3 (diameter 3mm / 0.12 inch), the distance between the centers of the mounting holes is 25mm / 0.98 inch
Barometric Pressure Sensor
Barometric Pressure Unit Relationship: 1000pa = 10hpa = 1kpa
Sensor Chip Model: BMP280
Barometric Pressure Measurement Range: 3000~1100 hPa
Relative Accuracy Of barometric Pressure: ±0.12 hPa
Absolute barometric Pressure Accuracy: ±1 hPa
Temperature & Humidity Sensor
Sensor Chip Model: SHT-C3
Relative Humidity Accuracy: ±2%RH
Relative Humidity Resolution: 0.01%RH
Relative Humidity Measurement Range: 0~100
Temperature Accuracy: ±0.2°C
Temperature Resolution: 0.01°C
Temperature Measurement Range: -40~125°C
UV Sensor
Sensor Chip Model: ML8511
Ultraviolet Sensitive Wavelength UV-A (320-400nm), UV-B (280-320nm)
Ultraviolet Output Unit: mW/m²
Ambient Light Sensor
Sensor Chip Model: VEML7700
Ambient Light Accuracy: 0.0036 lx/ct
Ambient Light Range: 0~120 klx
Documents
Shipping List
Gravity: Multifunctional Environmental Sensor x1
Gravity 4P Connector x1
Jargon buster
Plain-language definitions for the technical terms used above.
- Ambient light sensor
- A sensor that measures the general brightness of light falling on it, similar to how a device can adjust screen brightness automatically. It matters when you want a project to react to room lighting, daylight, shadows, or covered/uncovered conditions.
- breakout
- A breakout board carries a small or fine-pitched component and brings its connections out to standard, breadboard- and header-friendly pins. Describing a part as a breakout means it can be wired into a project without soldering directly to the component's tiny contacts.
- DC
- DC means direct current, where electricity flows in one constant direction, as supplied by batteries, USB ports and many plug-pack power supplies. When a product specifies DC, it runs from a DC supply rather than mains AC, so you need to provide the correct voltage and polarity.
- Gravity
- Gravity is DFRobot’s plug-in connector system for sensors, motors and modules, using standard cables to reduce loose jumper wiring. It matters because Gravity-compatible parts can connect directly to these ports, while non-Gravity parts may need adapters or manual wiring.
- I2C
- I2C is a two-wire communication bus used by many sensors and small modules. It matters because several I2C devices can share the same two wires, but each device needs a compatible address and your controller must support I2C.
- UART
- UART is a simple asynchronous serial interface that sends data over separate transmit and receive wires, usually labelled TX and RX, with both ends set to the same baud rate. It is a common way for microcontrollers and other serial devices to exchange data.
- wavelength
- The distance between repeating peaks of a wave, often used to describe the colour of light in nanometres. For visible lasers and LEDs, wavelength tells you the approximate colour, such as red, green or blue.
Find this product in
Brands
Supplier page — dfrobot.com
Supplier Description · 816.1 KB · Click any page to view full size
SEN0501 gravity multifunctional environmental sensor schematics 1.0
Schematic · 325.7 KB · Click any page to view full size
Resources & Downloads
Guides, code examples, and more
Related Tutorials
Free step-by-step guides
