All Products

SKU: AF-2336

11 millimeters that is! Our Black Plated M/F Brass Standoffs are engineered specifically to keep your Pi HAT snug on your Pi while also keeping the two boards separated, in particular the HDMI port. These standoffs can also be screwed into each other allowing stacking multiple H...

SKU: AF-4079

This 2×20 female socket riser header features slightly longer-than-standard pins, adding extra height between your Raspberry Pi and any HAT, Bonnet, or pHAT mounted on top. This additional clearance helps boards clear taller components on the Pi or fit more neatly into cases. The header body is ...

SKU: DF-DFR1252 · MPN: DFR1252

Add dedicated edge AI acceleration to your host system with this compact DX-M1 M.2 module. It delivers 25 TOPS (INT8) inference performance in a standard M.2 2280 form factor, with low 2W–5W power consumption for embedded and mobile systems.The module uses an M.2 M-Key interface over PCIe Gen3 x4...

SKU: PL-2749

A 2×20-pin stackable female header designed for the Raspberry Pi GPIO. The extended pins allow HATs and add-on boards to be stacked while still providing access to all 40 GPIO pins for additional connections. This version includes three removable 0.1" spacers, giving it extra height to clear the...

SKU: LB-ZERO2WH-START

LIMIT 1 per person - if you buy more than 1 they will be refunded less transaction fees.The Raspberry Pi Zero 2 WH Starter Kit has everything you need to get started on your Raspberry Pi Zero 2 project.With coloured headers already soldered on you can get straight into adding Hats or jumper w...

SKU: LB-00349

The Raspberry Pi Zero W Basics Kit includes the Pi Zero W single-board computer along with essentials to get started. The Pi Zero W adds built-in WiFi and Bluetooth to the compact Pi Zero form factor, making it ideal for lightweight IoT projects, headless servers, and embedded applications. Key ...

SKU: LB-PT-HEATSINK-BL

An extra-large aluminium heatsink for the Raspberry Pi 4, featuring 98 low-profile fins for maximum heat dissipation. At just 5 mm tall, it fits under most HATs, giving you passive cooling without limiting expansion options. The adhesive thermal pad on the base provides both secure mounting and ...

SKU: AF-4863

The Adafruit CYBERDECK HAT is a GPIO extender for the Raspberry Pi 400 that lets you plug full-size HAT displays and add-on boards into the back of the Pi 400 at a convenient angle. It duplicates every GPIO pin from input to output, so your HATs work without any pin limitations. In addition to t...

SKU: LB-PT22027

The Raspberry Pi 40-Pin GPIO Double Expansion Board splits your Pi's single GPIO header into two, letting you connect multiple HATs, breakout boards, or accessories simultaneously without stacking conflicts. Simply connect it to your Raspberry Pi's 40-pin header, and you'll have two full GPIO br...

SKU: LB-LS1400

Are you still experiencing overheating issues on your Raspberry Pi 4? Don’t worry, we have prepared a cooling solution for it. These shiny purple aluminum heatsinks are perfect for the Raspberry Pi 4 and its power-hungry tasks. It has excellent resistance to oxidation and will effectively prev...

SKU: WS-18995

This GPIO header adapter is designed specifically for the Raspberry Pi 400, converting its rear-mounted 40-pin GPIO header into two standard 40-pin headers for easy expansion. The colour-coded header makes it simple to identify pins at a glance. Since the Raspberry Pi 400's GPIO header faces out...

SKU: WS-18994

A GPIO header adapter designed specifically for the Raspberry Pi 400. It connects to the Pi 400's rear GPIO header and provides a standard 40-pin breakout, making it easy to attach HATs, breadboards, and other expansion boards. The header features colour-coded pins for quick identification of po...

SKU: LB-ZEROWH-START

The Raspberry Pi Zero WH Starter Kit has everything you need to get started on your Raspberry Pi Zero WH project.With black headers already soldered on you can get straight into adding Hats or jumper wires to connect up your project.Kit includesRaspberry Pi Zero WHClear Zero Case with GPIO spa...

SKU: AF-3299

Totaling 380 pieces, this M2.5 Screw Set is a must-have for your workstation. You'll have enough screws, nuts, and hex standoffs to fuel your maker tendencies for days on end! M2.5 size screws fit almost all of the Adafruit breakout/dev board mounting holes (2.5mm or 0.1" drill holes). Works g...

SKU: AF-2082

The Timber Pibow is a layered wood enclosure from Pimoroni for the Raspberry Pi 1 Model B+. Crafted from high-quality wood with transparent acrylic top and base layers, it provides a natural, elegant look while protecting the board. An extension layer is included for stacking HATs or other access...

SKU: DF-DFR0029-Y

Press to release pleasure! Our redesigned digital push buttons come with LED, immersion gold surface, and bright colored hats. A captital D at left corner indicates that it is a digital sensor. An illustration of button painted in the back notifying its function. Pressing it is a real fun, espec...

SKU: AF-477

Show your support for the open-source hardware movement with this embroidered iron-on patch featuring the Open Source Hardware (OSHW) logo. Originally created for the 2011 Open Hardware Summit, this badge is a great way to display your commitment to open design on bags, jackets, lab coats, or hat...

SKU: SF-CAB-13028

This 40-pin (2×20) flat ribbon cable connects to the GPIO header on the Raspberry Pi, providing easy access to all GPIO, I2C, SPI, UART, and power pins. The 6-inch (15 cm) length keeps things tidy while giving you room to work with breadboards, breakout boards, and HATs. The cable uses standard ...

SKU: PL-1037

The 0.100″ (2.54 mm) 2×20-Pin Straight Female Header is a double-row, 40-pin socket strip designed to mate with standard 0.1″ pitch male headers. This is the standard GPIO header size used on Raspberry Pi and other single-board computers, making it an essential connector for SBC projects. The 2×...

SKU: AF-3083

A compact aluminium heatsink with pre-applied thermal adhesive for easy installation on the Raspberry Pi 3 and other single board computers. Simply peel off the protective film and press firmly onto the processor — no additional thermal paste or clips required. In testing, a Raspberry Pi 3 witho...