All Products

SKU: AF-2028 · MPN: 2028

This is the assembled version of the Pi T-Cobbler Plus.  It only works with the Raspberry Pi Model Zero, A+, B+, Pi 2,Pi 3! (Any Pi with 2x20 connector)The Raspberry Pi has landed on the Maker World like a 40-GPIO pinned, quad-USB ported, credit card sized bomb of DIY joy. And while you ...

SKU: AF-1993 · MPN: 1993

This 2×20 (40-pin) IDC box header is the matching connector for 40-pin GPIO ribbon cables used with Raspberry Pi models that have a 40-pin GPIO header. Solder it onto perfboard to create a breakout point for your Pi's GPIO, or use it in any custom PCB design. Key Features 40-Pin (2×20) – Match...

SKU: AF-2029 · MPN: 2029

The Raspberry Pi B+/Pi 2/ Pi 3 has landed on the Maker World like a 40-GPIO pinned, quad-USB ported, credit card sized bomb of DIY joy. And while you can use most of our great Model B accessories by hooking up our downgrade cable, its probably a good time to upgrade your set up and accessorize...

SKU: AF-1754 · MPN: 1754

The Adafruit Pi T-Cobbler breaks out all the power, GPIO, I2C and SPI pins from the Raspberry Pi's 26-pin header onto a solderless breadboard in a T-shaped layout. The wider T-shape makes the pin labels easier to read compared to the compact Cobbler. Comes fully assembled with a 26-pin ribbon cab...

SKU: AF-2738 · MPN: 2738

Control the same hardware as used in space...build your very own Astro Pi with the new Raspberry Pi Sense HAT! The Raspberry Pi Sense HAT is attached on top of the Raspberry Pi via the 40 GPIO pins to create an ‘Astro Pi’. The Sense HAT has several integrated circuit based sensors can be used ...

SKU: AF-3527 · MPN: 3527

The Adafruit PiOLED is a compact 128×32 monochrome OLED display that plugs directly onto your Raspberry Pi's GPIO header. At just 1 inch diagonal, it's the perfect status display for headless Pi projects — showing IP addresses, system stats, sensor readings, or custom graphics without needing a f...

SKU: AF-6358 · MPN: ADA6358

Build large, colourful HUB75 RGB LED matrix displays from a Raspberry Pi without the usual jumper-wire tangle. This Adafruit Bonnet plugs onto the 40-pin GPIO header and drives three parallel matrix strings using the active3 pinout, so it can handle roughly three times as many panels or pixels as...

SKU: AF-1914 · MPN: 1914

The Raspberry Pi Model B+ is an updated revision of the original Raspberry Pi Model B, featuring improved power supply design, more USB ports, expanded GPIO, and a more convenient microSD card slot — all in the same compact form factor. Powered by the same Broadcom SoC running at 700 MHz with 51...

SKU: AF-1148 · MPN: 1148

The Adafruit Half-size Perma-Proto Raspberry Pi Breadboard PCB Kit combines a prototyping board with a built-in Pi Cobbler breakout. Solder the included 2×13 box header onto the board, connect a 26-pin GPIO ribbon cable (not included), and you get labelled GPIO breakouts alongside a generous half...

SKU: RP-SC0329 · MPN: SC0329

Raspberry Pi Sense HAT V2 — Your Mission Control for Data, Dazzle, and DIY Experiments!What if your Raspberry Pi could sense everything—orientation, weather, movement, your own code-controlled lightshow…and let you interact, play, and explore with a flick of your thumb? That’s the magic of the Se...

SKU: SF-SEN-16826 · MPN: SEN-16826

Bring 60GHz radar sensing into your project with the Acconeer A111 single-chip pulsed coherent radar sensor on a SparkFun breakout board. It is suited to high-precision distance measurement, and also supports gesture, motion, material and speed-detection applications at distances up to two metres...

SKU: DF-DFR0767-4 · MPN: DFR0767-4

Turn a Raspberry Pi Compute Module 4 into a compact dual-Gigabit router, gateway or IoT platform with this mini carrier board kit from DFRobot. The board connects a Gigabit network card over PCIe, giving the CM4 two full-speed Gigabit Ethernet ports with lower CPU usage and improved long-running ...

SKU: DF-DFR0767-3 · MPN: DFR0767-3

This kit bundles DFRobot’s compact Compute Module 4 IoT Router Carrier Board Mini with a metal cooling case and heat sink, a 5V@3A USB power supply (US Standard), and a USB 3.0 to Type-C cable. It is designed around the Raspberry Pi Compute Module 4 series for building small, capable network appl...

SKU: DF-DFR0767-2 · MPN: DFR0767-2

This compact kit provides a networking carrier platform for the Raspberry Pi Compute Module 4 series, suited to embedded routing, gateway and edge networking projects. It is designed for dual-gigabit networking using the CM4 built-in Ethernet interface and a PCI Express 1000BASE-T NIC, offering a...