All Products
Showing 1-20 of 47 products · 13 unavailable products hidden
Bluetooth 2.0 Module V3 For Arduino
A Bluetooth 2.0 serial module for Arduino, featuring the CSR BC417143 chip with a double-board design for electrostatic protection. Provides transparent serial data communication over Bluetooth with a configurable baud rate from 4800 to 1,382,400 bps. Compatible with most Bluetooth adapters, lap...
Adafruit QT Py ESP32 Pico - WiFi Dev Board with STEMMA QT
·
The Adafruit QT Py ESP32 Pico brings the full power of the classic ESP32 into the tiny QT Py form factor. Built around the ESP32-PICO-V3-02 — an all-in-one module with dual-core 240 MHz Tensilica processor, Wi-Fi, Bluetooth Classic + BLE, 8 MB flash, and 2 MB PSRAM — this thumbnail-sized board is...
SparkFun ESP32 Qwiic Pro Mini
·
Say hello to the next generation of Pro Mini boards - the SparkFun ESP32 Qwiic Pro Mini houses the powerful ESP32-PICO-MINI-N8R2 from Espressif on our compact Pro Mini footprint with 2MB of PSRAM. With two individually controllable CPU cores, adjustable CPU clock frequency, a co-processor that ca...
SparkFun MicroMod WiFi Function Board - ESP32
The SparkFun MicroMod ESP32 Function Board adds additional wireless options to MicroMod Processor Boards that do not have that capability. This special function board acts as a coprocessor that takes advantage of Espressif's ESP32 WROOM to add WiFi and Bluetooth® to your applications.At the core ...
BlueSMiRF v2 Bluetooth Serial Link with JST-GH
·
Turn a wired UART link into a dependable short-range Bluetooth® serial connection for microcontrollers, computers and mobile devices. It pairs, connects and passes data between TX and RX lines, buffering serial streams for byte-perfect delivery between radios.This JST version swaps the usual pins...
ItsyBitsy ESP32 PCB Antenna - 8MB Flash / 2MB PSRAM
·
This compact wireless development board gives you a full-featured ESP32 platform in the familiar ItsyBitsy format. It uses the ESP32 PICO ECO V3 in an FCC-certified ESP32 Pico module, combining a dual-core 240MHz processor with 2.4GHz Wi-Fi, Bluetooth® Classic and BLE, plus 8 MB of Flash and 2 MB...
Thing Plus RP2350 Wireless Development Board (Ding & Dent)
·
This Thing Plus board is a wireless development platform built around the Raspberry Pi Foundation RP2350 microcontroller. It combines the familiar Thing Plus form factor with Qwiic expansion, a µSD card socket, USB-C, LiPo charging hardware and a fuel gauge for local or remote projects.The RP2350...
ESP32 WROOM MCU Module - 16MB (PCB Antenna)
The ESP32-WROOM-32E is a powerful, generic Wi-Fi+BT+BLE MCU module that targets a wide variety of applications, ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music streaming and MP3 decoding. At the core of this module is the ESP32-D0WDQ6 chip. Th...
SparkFun Thing Plus - ESP32 WROOM (USB-C)
The SparkFun ESP32 WROOM Thing Plus is a Feather-compatible development board built around Espressif's ESP32-WROOM module, featuring USB-C, integrated Wi-Fi and Bluetooth, a microSD card slot, LiPo battery management with fuel gauge, and a Qwiic I2C connector for plug-and-play sensor expansion. ...
Thing Plus ESP32 WROOM (U.FL)
·
Built around Espressif’s ESP32-WROOM-32UE module, this Thing Plus board gives you a compact foundation for connected projects that need WiFi, Bluetooth and a flexible antenna setup. The onboard U.FL connector lets you attach a suitable external antenna for installations where a PCB antenna is not...
Thing Plus RP2350 Wireless Development Board
·
Build connected sensor nodes, data loggers and battery-powered IoT projects around Raspberry Pi’s RP2350 microcontroller. This Thing Plus board adds wireless connectivity, extra memory and the familiar Feather-compatible footprint in a compact development platform.The RP2350 can run two selected ...
ESP32 Dual Antenna WiFi + Bluetooth Module with 8MB FLASH
·
ESP32-WROOM-DA (the DA is for Dual Antenna) is a powerful Wi-Fi + Bluetooth Classic + Bluetooth LE MCU module, with two complementary PCB antennas in different directions. Packed with 8 MB of internal QSPI Flash, it has lots of memory and great WiFi connectivity no matter where or how it is inst...
LG290P Quadband GNSS RTK Breakout (Qwiic)
·
Built around the Quectel LG290P, this compact RTK GNSS breakout is designed for high-precision positioning projects that need quad-band, multi-constellation reception. It follows the same board dimensions, pin layout and connectors as SparkFun’s GPS-RTK-SMA Breakout - ZED-F9P (Qwiic), making it a...
FireBeetle ESP32-E IoT Microcontroller with header (Supports Wi-Fi Bluetooth)
FireBeetle ESP32-E, specially designed forIoT, is an ESP-WROOM-32E-based main controller board with dual-core chips. It supports WiFi and Bluetooth dual-mode communication, and features small size, ultra-low power consumption, on-board charging circuit and easy-to-use interface, which can be c...
ESP32 WROOM MCU Module - 8MB (Dual Antenna)
The ESP32-WROOM-DA, which is a module that achieves high-quality, wireless connectivity across large areas, using two complementary PCB antennas in different directions. Also, based on its industry-leading technical specifications, the co-existence of WiFi and Bluetooth® (Classic & Low-Energy)...
SparkFun IoT RedBoard - ESP32 Development Board
The SparkFun IoT RedBoard is an ESP32 Development Board that includes everything but the kitchen sink! Espressif's ESP32 WROOM is a powerful WiFi and Bluetooth® MCU module that targets a wide variety of applications. At the core of this module is the ESP32-D0WDQ6 chip which is designed to be b...
Gravity: GP8413 2-Channel 15-bit I2C to 0-5V/10V DAC Module
This is a 2-channel DAC module with I2C communication, a resolution of 15-bit, and an accuracy of 0.2%, capable of generating analog voltage outputs of 0-10V or 0-5V. The 0-10V or 0-5V voltage range is a standard driving method. It can be widely used in automation applications such as light adju...
Gravity: GP8503 2-Channel 12bit I2C to 0-2.5V/VCC DAC Module
·
##Introduction This is a 2-channel analog voltage output DAC module with I2C communication, 12-bit resolution, and 0.1% precision. It is well-suited for control projects operating within the 3.3V range, such as ESP32, Raspberry Pi, STM32, and other microcontrollers that require analog signal outp...
Adafruit HUZZAH32 – ESP32 Breakout Board
·
The Adafruit HUZZAH32 ESP32 Breakout is a compact, breadboard-friendly development board built around the Espressif ESP32 dual-core processor. With WiFi, Bluetooth Classic, and BLE support, 4 MB SPI Flash, and a generous set of GPIO, analog, and communication peripherals, it's a powerful and affo...
SparkFun Thing Plus - NINA-B306
The SparkFun NINA-B306 Thing Plus offers a unique combination development platform in the Thing Plus form factor featuring the NINA-B306 from u-blox™, the ISM330DHCX 6DoF IMU from STMicroelectronics™ and the BME280 atmospheric sensor from Bosch Sensortec™. The NINA-B306 is a combination Bluet...
