All Products
AI Overview
“Grove” typically refers to Seeed Studio’s 4‑pin, plug‑and‑play modular sensor ecosystem (easy, no-solder connections). Here are the best matches by use case:
Grove kits (best for getting started)
- Grove Inventor Kit for micro:bit (micro:bit, sensors + actuators bundle) $125.10
- Grove Starter Kit for Raspberry Pi Pico (Raspberry Pi Pico, Grove modules + learning bundle) $98.30
- Grove - Starter Kit for Arduino (Arduino with Grove Base Shield) $93.60
Grove “shields” / adapters (to add Grove ports to your board)
- Grove Shield for micro:bit (micro:bit → Grove connectors expansion) $22.15
- Grove Shield FeatherWing for Particle Mesh and all Feathers (Feather/Particle Mesh → Grove connectors) $13.70
Common Grove modules (sensors / inputs)
- Grove - Button (momentary pushbutton module) $4.65
- Grove - Sound Sensor (microphone / sound level sensing) $6.20
Grove cables & interconnects (for wiring/compatibility)
- GROVE Cable 100cm-1pcs (1 m Grove cable) $4.90
- GROVE Cable 50cm-2pcs (2-pack, 50 cm Grove cables) $4.90
- Grove to Pin (Grove extension/adapter for flexible hookups) $5.25
- Grove Cable Pigtail - 2mm pitch 100mm long (Grove → bare wire pigtail, 100 mm) $2.15
Grove ↔ Qwiic / STEMMA QT (I2C ecosystem bridging)
- Qwiic Cable - Grove Adapter (150mm) (Qwiic ↔ Grove adapter cable) $4.95
- Grove to STEMMA QT / Qwiic / JST SH Cable - 100mm long (Grove ↔ JST-SH STEMMA QT/Qwiic, 100 mm) $4.15
Grove Zero (education line)
- Grove Zero Starter Kit entry kit $19.55
- Teaching With Grove Zero teaching resource $0.02
What are you trying to do with Grove?
Collections
Showing 1-20 of 35 products · 25 unavailable products hidden
Grove Inventor Kit for micro:bit
Grove Starter Kit for Seeed Studio XIAO
Grove - Starter Kit for Arduino
Grove Shield for micro:bit
Grove Starter Kit for Raspberry Pi Pico
Adafruit Grove and Stemma QT FeatherWing for all Feathers
MPN: ADA5862
Grove to STEMMA QT / Qwiic / JST SH Cable - 100mm long
Grove - Button
JST PH Compatible 2.0mm Connector Kit - 220 Piece
MPN: ADA4422
JST PH 4-Pin to Male Header Cable - I2C STEMMA Cable - 200mm
BitMaker_V2 - JST 2.0 battery connector & 6 Grove connectors
Grove Cable Pigtail - 2mm pitch 100mm long
5V 1.8A Isolated Output PoE Module Works with Raspberry Pi 3 B+
4-pin JST PH to JST SH Cable - STEMMA / Grove to QT / Qwiic - 200mm long
EasyESP-1: An ESP8266 experimenter board for beginners
Aluminum Case For Raspberry Pi B+/ 2B/ 3B
Qwiic Cable - Grove Adapter (150mm)
Adafruit 2.13 Monochrome E-Ink Bonnet for Raspberry Pi - THINK INK
Grove - Sound Sensor
ELECFREAKS Grove 4Pin Adapter Cable
Grove Inventor Kit for micro:bit
Expand your micro:bit with the Grove Inventor Kit – a complete package of sensors, displays, and actuators that connect without soldering. The kit includes a Grove shield that adds plug-and-play Grove ports to your micro:bit, plus 8 carefully selected modules to get you building projects immediat...
Grove Starter Kit for Seeed Studio XIAO
The Grove Starter Kit for Seeed Studio XIAO bundles the XIAO Expansion Board with 9 Grove modules and additional components, providing a complete introduction to the XIAO development platform. Designed for beginners, it comes with free online courses to help you get started quickly. The kit cove...
Grove - Starter Kit for Arduino
The Grove Starter Kit for Arduino from Seeed Studio is a beginner-friendly electronics kit built around the Grove modular connector system. It includes a Base Shield with multiple Grove connectors, twelve plug-and-play modules, and a user manual to help you get started quickly — no soldering or c...
Grove Shield for micro:bit
The Grove Shield for micro:bit is a plug-and-play expansion board that bridges the micro:bit with the Seeed Studio Grove ecosystem. It provides 4 Grove connectors on-board (covering different interfaces) with provision for 4 additional Grove ports, giving access to hundreds of Grove sensors, actu...
Grove Starter Kit for Raspberry Pi Pico
Raspberry Pi Pico swept the MCU world like a huge wave. Pico born with powerful performance, reasonable price, and comprehensive resources, it will definitely become a great platform for learning and mastering electronic knowledge. To help you ride this wave, we launched the Grove Sta...
Adafruit Grove and Stemma QT FeatherWing for all Feathers
·
The Adafruit Grove and STEMMA QT FeatherWing brings Seeed Studio's Grove plug-and-play ecosystem to Adafruit Feather boards. With three analog/digital connectors, one UART connector, two I²C connectors, and a vertical STEMMA QT port, you can quickly connect a range of Grove sensors and modules to...
Grove to STEMMA QT / Qwiic / JST SH Cable - 100mm long
A 100 mm adapter cable that bridges the gap between Grove and STEMMA QT / Qwiic ecosystems. One end features a Grove connector, the other a JST SH (STEMMA QT / Qwiic compatible) connector — making it easy to mix and match sensors, breakouts, and host boards across different connector standards. ...
Grove - Button
A simple momentary push button module in the Grove form factor. When pressed it outputs a HIGH signal; when released it returns to LOW. The button includes a built-in pull-down resistor, so it's ready to use as a digital input straight out of the box. Part of the Seeed Studio Grove ecosystem, it...
JST PH Compatible 2.0mm Connector Kit - 220 Piece
·
This 220 piece connector assortment gives your workstation a handy supply of 2.0mm pitch JST-PH compatible plugs, sockets and crimp terminals. It is a useful kit for prototyping, repairs and making up custom leads for common maker electronics.JST-PH style connectors are widely used in electronics...
JST PH 4-Pin to Male Header Cable - I2C STEMMA Cable - 200mm
This 200 mm cable converts a JST PH 4-pin connector into four individual wires with 0.1″ (2.54 mm) male header pins on the end. It's designed for connecting STEMMA and Grove I²C boards to breadboards, socket headers, or any standard 0.1″ pitch connection. Key Features JST PH to Male Headers – ...
BitMaker_V2 - JST 2.0 battery connector & 6 Grove connectors
Features Easy Usage: Start by simply sliding into the Micro:bit Enhanced functionality: Equipped additionally with an RGB LED, a power switch, a power indicator, and six spare grove connectors Charge: Powered by a USB cable or an external battery Language Supported: MakeCode/MicroPython Comes wi...
Grove Cable Pigtail - 2mm pitch 100mm long
A 100 mm pigtail cable with a Seeed Grove connector on one end and four bare wires on the other, for connecting Grove-compatible boards and breakouts to custom wiring. Specifications Connector – Grove (2 mm pitch), 4-pin Length – 100 mm Wires – 4 (bare ends) Wire Colours Black – GND Red...
5V 1.8A Isolated Output PoE Module Works with Raspberry Pi 3 B+
An isolated Power over Ethernet (PoE) module that extracts power from the Ethernet cable's centre taps and outputs a regulated 5 V at up to 1.8 A. The built-in isolation transformer ensures there is no direct electrical connection between the Ethernet side and the 5 V output — important for safet...
4-pin JST PH to JST SH Cable - STEMMA / Grove to QT / Qwiic - 200mm long
A 200mm adapter cable with a JST-SH 4-pin connector (STEMMA QT / Qwiic, 1mm pitch) on one end and a JST-PH 4-pin connector (STEMMA / Grove, 2mm pitch) on the other. Use it to bridge I2C sensors and drivers between the two connector ecosystems. Both connectors have a latching feel for secure conn...
EasyESP-1: An ESP8266 experimenter board for beginners
The EasyESP-1 is a beginner-friendly development board for the ESP8266 Wi-Fi microcontroller, based on the ESP-12E module. It includes an onboard USB-to-serial converter (CP2102) so you can program and debug directly over USB — no additional hardware required. All GPIO pins are broken out to 2.5...
Aluminum Case For Raspberry Pi B+/ 2B/ 3B
A premium CNC-machined aluminium case for the Raspberry Pi B+, 2 Model B, and 3 Model B. Features anodic oxidation processing for a durable, professional finish with high-precision dimensions for a perfect fit. The grooved bottom design provides easy access for GPIO ribbon cables. Key Features ...
Qwiic Cable - Grove Adapter (150mm)
With the SparkFun Qwiic Connect System expanding every day, we want to make sure it becomes as accessible as possible but we understand there are other systems that can compliment it out there. The Qwiic to Grove Adapter Cable allows interoperability between the SparkFun Qwiic Connect System and ...
Adafruit 2.13 Monochrome E-Ink Bonnet for Raspberry Pi - THINK INK
The Adafruit 2.13" Monochrome E-Ink Bonnet brings crisp, paper-like displays to your Raspberry Pi with no soldering required. Simply plug this pre-assembled bonnet onto any Pi with a 2×20 header and start displaying high-contrast black-and-white graphics that remain visible even with power discon...
Grove - Sound Sensor
The Sound sensor module is a simple microphone. Based on the power amplifier LM386 and the electret microphone, it can be used to detect the sound strength of the environment. The value of output can be adjusted by the potentiometer. Features Grove compatible interface Wide supply vo...
ELECFREAKS Grove 4Pin Adapter Cable
Specially designed to connect to Grove sensors, can be used on sensor:bit, octopus:bit, or other expansion boards. Used to connect IIC devices
