All Products
AI Overview
“Grove” typically refers to Seeed Studio’s 4‑pin, plug‑and‑play modular sensor ecosystem (easy, no-solder connections). Here are the best matches by use case:
Grove kits (best for getting started)
- Grove Inventor Kit for micro:bit (micro:bit, sensors + actuators bundle) $125.10
- Grove Starter Kit for Raspberry Pi Pico (Raspberry Pi Pico, Grove modules + learning bundle) $98.30
- Grove - Starter Kit for Arduino (Arduino with Grove Base Shield) $93.60
Grove “shields” / adapters (to add Grove ports to your board)
- Grove Shield for micro:bit (micro:bit → Grove connectors expansion) $22.15
- Grove Shield FeatherWing for Particle Mesh and all Feathers (Feather/Particle Mesh → Grove connectors) $13.70
Common Grove modules (sensors / inputs)
- Grove - Button (momentary pushbutton module) $4.65
- Grove - Sound Sensor (microphone / sound level sensing) $6.20
Grove cables & interconnects (for wiring/compatibility)
- GROVE Cable 100cm-1pcs (1 m Grove cable) $4.90
- GROVE Cable 50cm-2pcs (2-pack, 50 cm Grove cables) $4.90
- Grove to Pin (Grove extension/adapter for flexible hookups) $5.25
- Grove Cable Pigtail - 2mm pitch 100mm long (Grove → bare wire pigtail, 100 mm) $2.15
Grove ↔ Qwiic / STEMMA QT (I2C ecosystem bridging)
- Qwiic Cable - Grove Adapter (150mm) (Qwiic ↔ Grove adapter cable) $4.95
- Grove to STEMMA QT / Qwiic / JST SH Cable - 100mm long (Grove ↔ JST-SH STEMMA QT/Qwiic, 100 mm) $4.15
Grove Zero (education line)
- Grove Zero Starter Kit entry kit $19.55
- Teaching With Grove Zero teaching resource $0.02
What are you trying to do with Grove?
Collections
Showing 1-20 of 53 products · 43 unavailable products hidden
Grove Inventor Kit for micro:bit
Grove Starter Kit for Raspberry Pi Pico
Grove - Starter Kit for Arduino
Grove - Button
Grove - Sound Sensor
Grove Shield for micro:bit
Qwiic Cable - Grove Adapter (150mm)
Grove to STEMMA QT / Qwiic / JST SH Cable - 100mm long
Grove Cable Pigtail - 2mm pitch 100mm long
Grove Starter Kit for Seeed Studio XIAO
ELECFREAKS Grove 4Pin Adapter Cable
Adafruit Grove and Stemma QT FeatherWing for all Feathers
MPN: ADA5862
Grove to Octopus Cable
4-pin JST PH to JST SH Cable - STEMMA / Grove to QT / Qwiic - 200mm long
BitMaker_V2 - JST 2.0 battery connector & 6 Grove connectors
Cytron MOTION 2350 Pro RP2350 Robotics Controller
MPN: ADA6080
Adafruit STEMMA Soil Sensor - I2C Capacitive Moisture Sensor
BITCAR - Autonomous Line Following Obstacle Avoiding Car for micro:bit
mbed Shield
Adafruit NeoTrellis RGB Driver PCB for 4x4 Keypad
Grove Inventor Kit for micro:bit
Expand your micro:bit with the Grove Inventor Kit – a complete package of sensors, displays, and actuators that connect without soldering. The kit includes a Grove shield that adds plug-and-play Grove ports to your micro:bit, plus 8 carefully selected modules to get you building projects immediat...
Grove Starter Kit for Raspberry Pi Pico
Raspberry Pi Pico swept the MCU world like a huge wave. Pico born with powerful performance, reasonable price, and comprehensive resources, it will definitely become a great platform for learning and mastering electronic knowledge. To help you ride this wave, we launched the Grove Sta...
Grove - Starter Kit for Arduino
The Grove Starter Kit for Arduino from Seeed Studio is a beginner-friendly electronics kit built around the Grove modular connector system. It includes a Base Shield with multiple Grove connectors, twelve plug-and-play modules, and a user manual to help you get started quickly — no soldering or c...
Grove - Button
A simple momentary push button module in the Grove form factor. When pressed it outputs a HIGH signal; when released it returns to LOW. The button includes a built-in pull-down resistor, so it's ready to use as a digital input straight out of the box. Part of the Seeed Studio Grove ecosystem, it...
Grove - Sound Sensor
The Sound sensor module is a simple microphone. Based on the power amplifier LM386 and the electret microphone, it can be used to detect the sound strength of the environment. The value of output can be adjusted by the potentiometer. Features Grove compatible interface Wide supply vo...
Grove Shield for micro:bit
The Grove Shield for micro:bit is a plug-and-play expansion board that bridges the micro:bit with the Seeed Studio Grove ecosystem. It provides 4 Grove connectors on-board (covering different interfaces) with provision for 4 additional Grove ports, giving access to hundreds of Grove sensors, actu...
Qwiic Cable - Grove Adapter (150mm)
With the SparkFun Qwiic Connect System expanding every day, we want to make sure it becomes as accessible as possible but we understand there are other systems that can compliment it out there. The Qwiic to Grove Adapter Cable allows interoperability between the SparkFun Qwiic Connect System and ...
Grove to STEMMA QT / Qwiic / JST SH Cable - 100mm long
A 100 mm adapter cable that bridges the gap between Grove and STEMMA QT / Qwiic ecosystems. One end features a Grove connector, the other a JST SH (STEMMA QT / Qwiic compatible) connector — making it easy to mix and match sensors, breakouts, and host boards across different connector standards. ...
Grove Cable Pigtail - 2mm pitch 100mm long
A 100 mm pigtail cable with a Seeed Grove connector on one end and four bare wires on the other, for connecting Grove-compatible boards and breakouts to custom wiring. Specifications Connector – Grove (2 mm pitch), 4-pin Length – 100 mm Wires – 4 (bare ends) Wire Colours Black – GND Red...
Grove Starter Kit for Seeed Studio XIAO
The Grove Starter Kit for Seeed Studio XIAO bundles the XIAO Expansion Board with 9 Grove modules and additional components, providing a complete introduction to the XIAO development platform. Designed for beginners, it comes with free online courses to help you get started quickly. The kit cove...
ELECFREAKS Grove 4Pin Adapter Cable
Specially designed to connect to Grove sensors, can be used on sensor:bit, octopus:bit, or other expansion boards. Used to connect IIC devices
Adafruit Grove and Stemma QT FeatherWing for all Feathers
·
The Adafruit Grove and STEMMA QT FeatherWing brings Seeed Studio's Grove plug-and-play ecosystem to Adafruit Feather boards. With three analog/digital connectors, one UART connector, two I²C connectors, and a vertical STEMMA QT port, you can quickly connect a range of Grove sensors and modules to...
Grove to Octopus Cable
Specially designed to connect to seeed studio sensors, seeed Sudio sensors can be used on sensor:bit, octopus:bit, Wukong or other expansion boards. Only ordinary seeed studio sensors can be connected, IIC devices can not be used.
4-pin JST PH to JST SH Cable - STEMMA / Grove to QT / Qwiic - 200mm long
A 200mm adapter cable with a JST-SH 4-pin connector (STEMMA QT / Qwiic, 1mm pitch) on one end and a JST-PH 4-pin connector (STEMMA / Grove, 2mm pitch) on the other. Use it to bridge I2C sensors and drivers between the two connector ecosystems. Both connectors have a latching feel for secure conn...
BitMaker_V2 - JST 2.0 battery connector & 6 Grove connectors
Features Easy Usage: Start by simply sliding into the Micro:bit Enhanced functionality: Equipped additionally with an RGB LED, a power switch, a power indicator, and six spare grove connectors Charge: Powered by a USB cable or an external battery Language Supported: MakeCode/MicroPython Comes wi...
Cytron MOTION 2350 Pro RP2350 Robotics Controller
·
Built around Raspberry Pi’s RP2350 processor, this Cytron robotics controller is made for beginner and intermediate builders who want to create more advanced robots while spending less time on the supporting electronics.The board integrates a 4-channel brushed DC motor driver, servo outputs, GPIO...
Adafruit STEMMA Soil Sensor - I2C Capacitive Moisture Sensor
The Adafruit STEMMA Soil Sensor uses capacitive measurement to detect soil moisture — a more durable approach than resistive sensors that corrode over time. With a single probe and no exposed metal, it avoids oxidation issues and won't introduce DC currents into your plants. The ATSAMD10 microco...
BITCAR - Autonomous Line Following Obstacle Avoiding Car for micro:bit
The BitCar is a micro:bit-powered robot car kit featuring autonomous line following, ultrasonic obstacle avoidance, and remote control capabilities. Built around a sturdy chassis with two metal gear motors, the car includes built-in modules for buzzer, line follower, and four addressable RGB LEDs...
mbed Shield
The mbed Shield is an application board designed for the mbed LPC1768 prototyping platform. It brings together CAN, Ethernet, USB, and four standard Grove connectors on a single board, making it easy to connect sensors, actuators, and communication interfaces to your mbed projects. With a standa...
Adafruit NeoTrellis RGB Driver PCB for 4x4 Keypad
Upgrade your button-pad projects with full-colour NeoPixel backlighting. The NeoTrellis RGB Driver PCB is a 4×4 keypad controller with 16 NeoPixels and an onboard seesaw I2C chip that handles both button scanning and LED driving — all over plain I2C, no NeoPixel pin management required. The boar...
