Adafruit
Grove Cable Pigtail - 2mm pitch 100mm long
All Products
Headers & Connectors
New Arrivals
Adafruit
Arduino Cables and Connectors
Brands and Manufacturers
Jumpers & Wires
Raspberry Pi Accessories
Components
Grove
Prototyping & Wiring
$2.15
|
In stock at supplier
A 100 mm pigtail cable with a Seeed Grove connector on one end and four bare wires on the other, for connecting Grove-compatible boards and breakouts to cust...
Get notified when back in stock
Estimated Delivery
Arrives
Disclaimer
Secure checkout
A 100 mm pigtail cable with a Seeed Grove connector on one end and four bare wires on the other, for connecting Grove-compatible boards and breakouts to custom wiring.
Specifications
- Connector – Grove (2 mm pitch), 4-pin
- Length – 100 mm
- Wires – 4 (bare ends)
Wire Colours
- Black – GND
- Red – V+ (3.3V or 5V depending on host board)
- Blue – SDA
- Yellow – SCL
Note: This is a Grove connector (2 mm pitch), not JST PH — it will not fit JST PH sockets. Check the power/signal voltage when connecting 3.3V-only sensors, as many Grove host boards run at 5V logic.
Jargon buster
Plain-language definitions for the technical terms used above.
- GND
- GND is the ground or reference connection (0 V) for a circuit. When connecting two devices together, their grounds must be joined so both agree on what counts as a low or high signal.
- Grove
- Grove is a standardised 4-pin plug-in connector system for sensors and modules that avoids soldering and jumper wires, with different cable types carrying I2C, UART, analogue or digital signals. When a product is Grove-compatible it can be quicker to connect supported modules, provided the connector type, signal and voltage all match.
- JST PH
- A small keyed plug-and-socket connector with 2 mm pin spacing, often used for low-power electronics connections. You need the correct JST PH cable, and its current rating limits how much power should be passed through it.
Find this product in
Related Tutorials
Free guides on learn.littlebird.com.au
