Seeed Studio
Grove Starter Kit for Seeed Studio XIAO
The Grove Starter Kit for Seeed Studio XIAO bundles the XIAO Expansion Board with 9 Grove modules and additional components, providing a complete introductio...
Get notified when back in stock
The Grove Starter Kit for Seeed Studio XIAO bundles the XIAO Expansion Board with 9 Grove modules and additional components, providing a complete introduction to the XIAO development platform. Designed for beginners, it comes with free online courses to help you get started quickly.
The kit covers environmental sensing (light, temperature, humidity, infrared), motion detection (accelerometer, PIR), user input (rotary angle sensor, mini controller), and output (servo, LEDs, RGB LED strip). All Grove modules connect via simple plug-and-play cables — no soldering required.
Key Features
- XIAO Expansion Board – Multiple data interfaces and peripherals for all XIAO boards
- 9 Grove Modules – Sensors, actuators, and LED outputs with plug-and-play connectivity
- Free Online Courses – Beginner-friendly tutorials from basic setup to advanced projects
- No Soldering – All Grove modules connect with included cables
- Multiple Sensing Types – Light, temperature, humidity, infrared, motion, and acceleration
Ideal For
- Beginners learning microcontroller development
- Seeed Studio XIAO platform exploration
- STEM education and classroom use
- IoT and sensor prototyping projects
Package Contents
- 1× Seeed Studio XIAO Expansion Board
- 1× Grove WS2813 RGB LED Strip (waterproof, 30 LED/m, 1m)
- 1× Grove LED Pack (green, red, blue, white)
- 1× Grove Rotary Angle Sensor
- 1× Grove Infrared Receiver V1.1
- 1× Grove Light Sensor V1.2
- 1× Grove Mini PIR Motion Sensor
- 1× Grove 3-Axis Digital Accelerometer (LIS3DHTR)
- 1× Grove Temperature & Humidity Sensor V2.0 (DHT20)
- 1× Grove Servo
- 1× USB-A to USB-C Cable
- 7× Grove Cables
- 4× Male-to-Male Jumper Wires
- 1× 20-Key Mini Controller
Resources
Jargon buster
Plain-language definitions for the technical terms used above.
- Grove
- Grove is a standardised 4-pin plug-in connector system for sensors and modules that avoids soldering and jumper wires, with different cable types carrying I2C, UART, analogue or digital signals. When a product is Grove-compatible it can be quicker to connect supported modules, provided the connector type, signal and voltage all match.
- IoT
- Short for Internet of Things, meaning physical devices that connect to networks or the internet to send data or be controlled remotely. It matters if you want projects such as connected sensors, remote controls or classroom data-logging activities.
- LED
- A light-emitting diode (LED) is a small electronic component that emits light when current flows through it in the correct direction. Because it only conducts one way, its polarity matters, and a through-hole LED must be soldered the correct way around to light up.
- male-to-male
- A male-to-male cable has plug-style connectors on both ends rather than a socket on one end. This matters when choosing a cable because it must match the female sockets on the modules or boards you want to connect.
- microcontroller
- A microcontroller is a small computer on a single chip that runs a stored program and controls connected inputs and outputs such as buttons, sensors, displays and communication interfaces. In a device built around one, it is the part that executes the code and coordinates the device's behaviour.
- Motion detection
- The ability to sense that something has moved, either by comparing successive camera frames or by using a dedicated sensor such as a PIR (infrared) or radar module. When a product lists motion detection, movement can be used as a trigger so a system only acts or records when there is activity rather than running continuously.
- RGB
- Short for red, green and blue, the three primary colours of light that are mixed in varying amounts to make a wide range of colours. In electronics RGB can refer to an LED or pixel that blends these three colours, or to a colour signal or interface that carries separate red, green and blue channels.
- servo
- A servo is a motor with built-in position control, usually told to move to a specific angle by a control signal. It matters when you need repeatable movement, such as steering, arms, flaps, or linkages, rather than continuous spinning.
- USB-C
- USB-C is a small, reversible USB connector that can carry power, data and, on some devices, video over a single cable. The same connector can range from charging only to high-speed data, so the functions a given port actually supports vary.
Find this product in
STEM & Education
Related Tutorials
Free guides on learn.littlebird.com.au