All Products

SKU: DF-DFR1236 · MPN: DFR1236

This development kit combines the FireBeetle 2 ESP32-C5 microcontroller board with a dedicated solderless IO expansion shield, giving you a practical platform for smart home and IoT prototypes.The ESP32-C5 brings dual-band Wi-Fi 6 on 2.4 GHz and 5 GHz, plus Bluetooth 5, Thread and Zigbee support....

SKU: DF-FIT1004 · MPN: FIT1004

An M.2 E Key wireless network card based on the Intel BE200 chipset, supporting WiFi 7 (IEEE 802.11be) with triple-band connectivity and Bluetooth 5.4. It delivers maximum wireless speeds of up to 8,774 Mbps across 2.4 GHz, 5.8 GHz, and 6 GHz bands, making it suitable for upgrading laptops, deskt...

SKU: WS-25452

A compact ESP32-C3 development board based on the ESP32-C3FN4 single-core RISC-V processor running at up to 160 MHz. With 2.4 GHz WiFi (802.11 b/g/n) and Bluetooth 5 (LE), 4 MB onboard flash, and a castellated module design, it's ideal for both breadboard prototyping and direct SMD soldering to c...

SKU: AF-5348

The Adafruit QT Py ESP32-S2 with uFL Antenna Port is the extended-range version of the QT Py ESP32-S2. Instead of an on-board antenna, it features a uFL connector so you can attach any 2.4 GHz Wi-Fi antenna for significantly better range — ideal for projects where the board is enclosed in a metal...

SKU: SF-WRL-29424 · MPN: WRL-29424

This compact, certified wireless module is designed for integration into custom PCBs and microcontroller products. It combines the Infineon CYW43439 chipset with single-band 2.4 GHz Wi-Fi 4 (802.11n) and Bluetooth 5.2 Classic + LE, using a SISO architecture with integrated PA, LNA and a shared 2....

SKU: SF-WRL-21605 · MPN: WRL-21605

Raytac’s MDBT50Q-1MV2 is a compact Bluetooth Low Energy module built around Nordic’s nRF52840 SoC. It is designed for connected products that need Bluetooth 5.x capability alongside 2.4 GHz radio options such as IEEE 802.15.4 for Thread and Zigbee, proprietary 2.4 GHz RF and ANT+.The module bring...

SKU: DF-FIT0505

A 2.4 GHz omni-directional antenna with 6 dBi gain and an IPEX MHF1 connector, providing strong WiFi signal reception and transmission. The 15 cm cable makes it easy to position the antenna away from the board for optimal placement. Key Features 6 dBi Gain – High gain for extended wireless ran...

SKU: AF-945

A 200 mm (8″) swivel dipole antenna with 5 dBi gain and an RP-SMA connector — the industry-standard fitting found on most WiFi routers and wireless modules. The higher gain compared to the 2 dBi version extends range at the cost of a larger form factor. The swivel joint lets you angle the antenna...

SKU: LB-KEY-MOUSE

A compact wireless keyboard and mouse combo using 2.4 GHz wireless technology with a unified nano receiver. The full-size keyboard features low-profile scissor-switch keys for quiet, responsive typing, while the included mouse provides reliable cursor control — all through a single USB dongle. K...

SKU: AF-944

A 100 mm (4″) swivel dipole antenna with 2 dBi gain and an RP-SMA connector — the industry-standard fitting found on most WiFi routers and wireless modules. The swivel joint lets you angle the antenna for optimal signal direction. Key Features 2 dBi Gain – Omni-directional coverage for short-t...

SKU: AF-4653

The ESP32-S2-WROVER is a Wi-Fi module from Espressif built around the ESP32-S2 SoC — a single-core 240 MHz Xtensa LX7 processor with native USB support, 4 MB flash, and 2 MB PSRAM. It provides 2.4 GHz 802.11b/g/n Wi-Fi connectivity in a compact castellated module form factor. The ESP32-S2 introd...

SKU: SF-DEV-22924 · MPN: DEV-22924

The SparkFun ESP32-C6 Thing Plus is a compact, user-friendly device packed with advanced technology, designed to enhance your wireless projects like never before. It features the Espressif™ ESP32-C6 WROOM-1-N16 module at its core, which includes a RISC-V single-core processor, ample flash memory...

SKU: AF-5300

The Adafruit ESP32-S2 TFT Feather features a built-in 1.14" IPS colour TFT display (240×135 pixels, ST7789) on the front of the board. Combined with the ESP32-S2's native USB, 2.4 GHz Wi-Fi, 4 MB flash, and 2 MB PSRAM, it provides a complete visual IoT platform in the Feather form factor. The co...

SKU: SF-WRL-00558

A large 2.4 GHz rubber duck antenna with 5 dBi gain and a reverse-polarity SMA (RP-SMA) connector. At 196 mm (7.7″) long, it provides significantly more range than smaller duck antennas — ideal when you need to push your wireless link further. Key Features 5 dBi Gain – Higher gain for extended...

SKU: AF-2308

A 100 mm (4″) flexible WiFi antenna with approximately 4 dBi gain and a U.FL (IPEX) connector. The flexible design lets you bend and position the antenna to suit your enclosure or project layout, while the U.FL connector snaps directly onto boards without the need for an adapter. Key Features ...

SKU: SF-DD-27675 · MPN: DD-27675

This Thing Plus board is a wireless development platform built around the Raspberry Pi Foundation RP2350 microcontroller. It combines the familiar Thing Plus form factor with Qwiic expansion, a µSD card socket, USB-C, LiPo charging hardware and a fuel gauge for local or remote projects.The RP2350...

SKU: EC-DRA19220W

A compact 2.4 GHz wireless keyboard with an integrated touchpad and RGB backlight. The mini form factor is ideal for controlling a Raspberry Pi, smart TV, or media centre from across the room. Connects via a USB dongle with no driver installation required. Powered by an internal BL-5B lithium ba...

SKU: SF-WRL-00144

A tiny 2.4 GHz ceramic chip antenna designed for surface-mount PCB layouts. While it won't match the range of a full-size rubber duck antenna, its extremely compact footprint lets you add wireless capability to space-constrained designs. Works well with Nordic Semiconductor ICs and other 2.4 GHz ...

SKU: SF-WRL-00145

A 2.4 GHz rubber duck antenna with 2.2 dBi gain and a reverse-polarity SMA (RP-SMA) connector. At 100 mm (4″) long with 50 Ω impedance, it's a straightforward way to add an external antenna to WiFi, Bluetooth, ZigBee, or other 2.4 GHz RF modules. Key Features 2.2 dBi Gain – Omni-directional co...

SKU: EC-WAW24040A

A 2.4 GHz WiFi antenna with 4 dBi gain and an IPEX (MHF) connector, enclosed in a protective cover. It connects directly to boards with an IPEX/U.FL socket, providing improved wireless range over built-in PCB antennas. Key Features 4 dBi Gain – Higher gain than standard stub antennas for exten...