All Products

SKU: AF-1455 · MPN: 1455

The Adafruit 12-Channel 16-bit PWM LED Driver uses the TLC59711 chip to provide 12 channels of constant-current, 16-bit PWM output — the highest resolution PWM driver available. Designed specifically for precision LED control, this board delivers smooth, flicker-free dimming across all channels. ...

SKU: AF-4084 · MPN: 4084

The Adafruit Grand Central M4 Express is a powerful development board built around the Microchip ATSAMD51P20 — a 120 MHz Cortex M4 processor with hardware floating point, 1 MB Flash, and 256 KB RAM. In the familiar Arduino Mega form factor, it brings 70 GPIO pins, dual DACs, 15 analog inputs, 8 M...

SKU: AF-1905 · MPN: 1905

The Adafruit Mini Lipo with Mini-B USB Jack is a compact charger for single-cell 3.7V/4.2V lithium polymer and lithium ion rechargeable batteries. Plug in any Mini USB cable to a USB power source and connect your battery via the JST connector — two LEDs show status at a glance (red = charging, gr...

SKU: AF-4569 · MPN: 4569

The Adafruit ISM330DHCX + LIS3MDL FeatherWing combines two precision ST sensors to deliver 9 degrees of freedom — accelerometer, gyroscope, and magnetometer — in the Feather form factor. Stack it onto any Feather board for industrial-quality motion sensing with AHRS orientation capability. The I...

SKU: AF-3242 · MPN: 3242

The Feather 32u4 Bluefruit LE with Stacking Headers combines an ATmega32u4 microcontroller with a Bluetooth Low Energy module, USB connectivity, and LiPo battery charging — with stacking headers pre-soldered so you can plug into a breadboard and stack FeatherWings on top. The Bluefruit module is...

SKU: AF-4313 · MPN: 4313

The Adafruit 1.3" 240×240 Wide Angle TFT LCD Display Breakout with MicroSD is a compact, high-density IPS screen driven by the ST7789 controller. With 240×240 pixels at 260 PPI in full 16-bit colour, it delivers sharp, vibrant visuals with 80° viewing angles in all directions. The breakout commu...

SKU: AF-3857 · MPN: 3857

The Feather M4 Express is built around the ATSAMD51J19, a 120 MHz Cortex M4 processor with hardware floating point and DSP instructions, 512 KB flash, and 192 KB RAM. It ships with CircuitPython pre-loaded — plug it in and it appears as a small USB drive with main.py ready to edit. No installs, I...

SKU: AF-2433 · MPN: 2433

The Adafruit DotStar APA102 Cool White LED Strip (60 LED/m, ~6000K) uses the same integrated DotStar driver as the RGB strips but with dedicated cool white phosphor LEDs. The result is an incredibly bright, consistent white light — far superior to mixing RGB to approximate white. Controlled via ...

SKU: AF-3061 · MPN: 3061

The Feather M0 WiFi with uFL pairs the ATSAMD21G18 ARM Cortex M0+ processor with an ATWINC1500 Wi-Fi module, featuring a uFL connector instead of an on-board antenna. This allows you to connect an external 2.4 GHz antenna for improved range or custom antenna placement in enclosures. The ATWINC15...

SKU: AF-2239 · MPN: 2239

The Adafruit DotStar Digital LED Strip (60 LED/m, black flex PCB) delivers superior performance over traditional NeoPixels with its 2-wire SPI interface. Push data at up to 32 MHz clock speed with no critical timing requirements, making it compatible with virtually any microcontroller or micropro...

SKU: AF-2238 · MPN: 2238

The Adafruit DotStar Digital LED Strip (30 LED/m, white flex PCB) delivers superior performance over traditional NeoPixels with its 2-wire SPI interface. Push data at up to 32 MHz clock speed with no critical timing requirements, making it compatible with virtually any microcontroller or micropro...

SKU: AF-2237 · MPN: 2237

The Adafruit DotStar Digital LED Strip (30 LED/m, black flex PCB) delivers superior performance over traditional NeoPixels with its 2-wire SPI interface. Push data at up to 32 MHz clock speed with no critical timing requirements, making it compatible with virtually any microcontroller or micropro...

SKU: AF-4756 · MPN: 4756

The Adafruit LTC4311 Active Terminator solves a common I2C problem: running long cables. Standard I2C is designed for short PCB-level connections, but cable capacitance and resistance degrade signals over distance. The LTC4311 watches the SDA and SCL lines and actively boosts pull-up current, res...

SKU: AF-3787 · MPN: 3787

The Adafruit 1.54" TFT LCD is a compact, high-density display featuring a 240×240 pixel IPS panel driven by the ST7789 chipset. With 220 PPI and wide viewing angles up to 80° in any direction, this display delivers vibrant, full-colour visuals that look great from virtually any angle. This break...

SKU: AF-2949 · MPN: 2949

The Mini Skinny NeoPixel strip features 30 individually addressable RGB LEDs per metre on an ultra-narrow 7.5 mm wide flexible PCB (5 mm without casing). This is the white PCB version — identical specs to the black PCB variant, just with a different-coloured flex strip for a brighter, more visibl...

SKU: AF-2954 · MPN: 2954

The Mini Skinny NeoPixel strip features 30 individually addressable RGB LEDs per metre on an ultra-narrow 7.5 mm wide flexible PCB (5 mm without casing). This is the black PCB version — the lowest density option in the Mini Skinny range, ideal for longer runs where power efficiency and wider pixe...

SKU: AF-1460-2552 · MPN: 2552

A versatile NeoPixel strip with 30 individually addressable RGB LEDs per metre on a flexible black PCB. Each pixel offers full 24-bit colour control with only a single data pin required. The lower pixel density makes this strip ideal for longer runs where tight spacing isn't needed. The strip is...

SKU: AF-3422 · MPN: 3422

The Adafruit Arcade Bonnet makes it easy to build retro gaming projects with a Raspberry Pi. It's sized to match the Pi Zero for compact builds, but works with any Pi that has a 2×20 header (Pi Zero, Pi 2, Pi 3, Pi B+, etc.). The bonnet manages all buttons and switches through an I2C GPIO expand...

SKU: AF-4438 · MPN: 4438

The Adafruit LSM6DSOX is a high-quality 6 Degree of Freedom (6-DoF) IMU from ST, combining a triple-axis accelerometer and triple-axis gyroscope on a single chip. Beyond basic motion sensing, it includes built-in tap detection, activity detection, a pedometer/step counter, and a programmable fini...

SKU: AF-2258 · MPN: 2258

The Adafruit Raspberry Pi B+ / Pi 2 / Pi 3 Case is a durable polycarbonate enclosure with a smoke-tinted base and clear top. Designed by Mike Doell, it offers a clean, professional look while keeping your Pi protected and fully accessible. The case features slim openings for all cables, a bevell...