All Products

SKU: SF-WRL-00145

A 2.4 GHz rubber duck antenna with 2.2 dBi gain and a reverse-polarity SMA (RP-SMA) connector. At 100 mm (4″) long with 50 Ω impedance, it's a straightforward way to add an external antenna to WiFi, Bluetooth, ZigBee, or other 2.4 GHz RF modules. Key Features 2.2 dBi Gain – Omni-directional co...

SKU: DF-DFR0008

The upgraded Arduino Input Shield includes a two axis mini joystick (with moment switch) as well as four colored push buttons(Red,Yellow,Blue,Green). The reserved APC220 Radio Data Module(SKU:TEL0005) interface and the Xbee interface is deisgned to facilitate the realization of wireless ro...

SKU: DF-DFR0265

The DFRobot Gravity IO Expansion Shield V7.1 simplifies Arduino prototyping by breaking out all digital and analogue pins into colour-coded 3-pin (Signal, Voltage, Ground) Gravity connectors. Plug in sensors, actuators, and modules directly — no soldering or breadboard wiring required. Version 7...

SKU: SF-WRL-00558

A large 2.4 GHz rubber duck antenna with 5 dBi gain and a reverse-polarity SMA (RP-SMA) connector. At 196 mm (7.7″) long, it provides significantly more range than smaller duck antennas — ideal when you need to push your wireless link further. Key Features 5 dBi Gain – Higher gain for extended...

SKU: DF-ROB0102

The Cherokey 4WD arduino mobile robot is a versatile mobile robot jeep compatible with the most popular microcontrollers like DFRduino UNO R3 - Arduino Compatible, Mega2560 (arduino microcontroller board), Romeo V2(an Arduino Robot Board (Arduino Leonardo) with Motor Driver)...etc. Cherokey e...

SKU: DF-DFR0225

RoMeo V2 [R3] is an All-in-One Arduino based robot board, it is especially designed for robotics applications, and extended devices. Romeo benefits from the Arduino open source platform, it is supported by thousands of open source projects, and can easily be expanded with Arduino Shields. The ...

SKU: SF-KIT-14051

The SparkFun Wireless Joystick Kit gives you a customisable wireless controller for XBee-based projects. Built around the SAMD21 microcontroller, it provides a flexible alternative to hobby RC transmitters — configure it your way at a fraction of the cost. The kit can be assembled in two configu...

SKU: DF-DFR0222

Internet of things has become so easy. With Xboard Relay, you can not only monitor data through internet, but also control it through internet. The Xboard Relay combines an Atmega 32u4 microprocessor and wiz5100 chip which is fully compatible with Arduino Lendardo and Ethernet library,...

SKU: SF-WRL-09143

A 900/1800MHz dual-band duck antenna with 2dBi gain and an RP-SMA connector. Well suited for XBee 900MHz modules and other 900MHz radio applications. 50-ohm impedance, 105mm long. Specifications Frequency – 900/1800MHz dual-band Gain – 2dBi Connector – RP-SMA Impedance – 50 ohm Length – 10...

SKU: SF-WRL-09232

This is an adapter that converts an RP-SMA board to an SMA antenna. The adapter will connect to any of our 2.4GHz wireless boards (Bluetooth, Nordic, or XBee) or interface cables and will allow you to use an antenna/cable with an SMA connection. You should not need this adapter with any of ...

SKU: AF-2672

These 2 mm pitch 25-pin female socket headers are perfect for connecting to modules and boards that use 2 mm pin spacing instead of the standard 2.54 mm (0.1″) pitch. Each pack includes five 25-pin strips that can be cut to your desired length with diagonal cutters. Gold-plated contacts ensure r...

SKU: DF-KIT0003

EcoDuino is evolving. Now the EcoDuino has an enclosure. It is protected from water splashes, so it is safe to use beside your plants. The Ecoduino now sports an Atmega32U4 which eliminates the requirement of an adapter. And sketches can simply uploaded via Mirco USB just like Arduino Leonad...

SKU: SF-DEV-14285

The SparkFun Wireless Motor Driver Shield is designed to make connecting motors, sensors and other components to your Arduino-based project as fast and easy as possible. The heart of the Wireless Motor Driver Shield is the Toshiba TB6612FNG H-Bridge Motor Driver, which allows the shield to contro...

SKU: DF-DFR0162

This is Version 2.0 of the Xboard. The main improvement is that it now operates at 5V, making it compatible with most sensors and I2C protocol without the need of a voltage level converter. The XBoard is a unique Arduino board which features a WIZnet ethernet port, an XBee socket, and...

SKU: AF-70

Just about all electronics use TTL serial for debugging, bootloading, programming, serial output, etc. But it's rare for a computer to have a serial port anymore. This is a USB to TTL serial cable, with a FTDI FT232RL usb/serial chip embedded in the head. It has a 6-pin socket at the end with 5V ...

SKU: DF-DFR0502

Gravity IO Expansion Shield with Motor Driver is a new product designed for Arduino Boards. It combines IO Expansion Shield and DC Motor Driver Shield, equipped with Gravity sensor interface and TB6612FNG dual motor driver. It also has XBee socket, I2C interface and UART po...

SKU: AF-1323

Turbo-charge your mbed LPC1769 dev board with this compact but feature-full application board. Fully assembled, just plug in your mbed and you will be ready to rock.Featuring: 128x32 Graphics LCD 5 way joystick 2 x Potentiometers 3.5mm Audio jack (Analog Out) Speaker, PWM Conencted 3 Axis +/1...