All Products

SKU: SF-PRT-14491

A pack of 20 through-hole 10 kΩ resistors with thick leads designed for a snug fit in solderless breadboards. These are standard ¼ W, ±5% tolerance PTH resistors — ideal for pull-ups, pull-downs, current limiting, and general prototyping. Specifications Resistance – 10 kΩ Tolerance – ±5% Pow...

SKU: SF-COM-18435 · MPN: COM-18435

This through-hole resistor is a simple, breadboard-friendly passive component for prototyping and general electronics work. It is commonly used with breadboards and perf boards, making it handy for pull-ups, pull-downs, voltage dividers, current limiting and signal conditioning.The leads are desi...

SKU: DF-SEN0709 · MPN: SEN0709

This industrial-grade ORP (Oxidation-Reduction Potential) sensor is built for reliable water quality monitoring in demanding environments. Its integrated probe and housing measure ORP from -1999 to 1999mV, with RS485 communication for connection into monitoring networks.The sensor supports the st...

SKU: TB-RR0580

A pack of eight 2.2 kΩ metal film resistors rated at 0.5 W (½ W) with ±1% tolerance. These are the same physical size as standard ¼ W carbon film resistors, making them a higher-power drop-in option for through-hole designs. Key Features 2.2 kΩ Resistance – ±1% tolerance for precise circuits ...

SKU: LB-LS0317-10K

Commonly used in breadboards and other prototyping applications, these 10K ohm resistors make excellent pull-ups, pull-downs and current limiters. These thick-lead versions of the resistors fit snugly into a breadboard with very little movement, so you should have few to no issues using them in ...

SKU: SF-COM-30222 · MPN: COM-30222

This compact resistor network packages eight individual 10k Ohm isolated resistors into one 16-pin 2506 surface-mount component. It is a handy way to save board space when a design needs several identical resistors close together.Each resistor element is rated for 63mW with a ±5% tolerance, makin...

SKU: SF-COM-14561

You don’t have to worry about adding a resistor to an LED if you get an LED with a built in resistor! This pack of 25 yellow 5mm LEDs will help alleviate any frustrations you’ve had with accidentally burning them out by having a resistor in the diode itself. Each LED has an operating voltage rang...

SKU: TB-RR0612

A pack of 8 metal film resistors rated at 47 kΩ and 0.5W (½W). These through-hole axial resistors offer 1% tolerance for accurate circuit design, and are the same physical size as standard ¼W carbon film resistors, making them a drop-in upgrade for higher power handling. Specifications Resista...

SKU: SF-PRT-14494

These are your run-of-the-mill ¼ Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and other prototyping applications, these 1M ohm resistors make excellent pull-ups, pull-downs and current limiters. These thick-lead versions of the resistors fit snugly into a breadboard with ver...

SKU: SF-COM-14560

You don’t have to worry about adding a resistor to an LED if you get an LED with a built in resistor! This pack of 25 red 5mm LEDs will help alleviate any frustrations you’ve had with accidentally burning them out by having a resistor in the diode itself. Each LED has an operating voltage range o...

SKU: SF-COM-11508

1/6th Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and perf boards, these 10K resistors make excellent pull-ups, pull-downs, and current limiters. We’ve opted for a new and more breadboard-friendly lead thickness (they’re a bit thicker than our last ones). These resistors...

SKU: SF-GPS-23288 · MPN: GPS-23288

Bring high-precision GNSS positioning to your project with the u-blox NEO-F9P engine and dual-band L1/L5 reception. L5 signals sit in the protected ARNS band, helping reduce RF interference and improve reliability in challenging environments such as dense city streets.The breakout provides five s...

SKU: SF-COM-08374

1/6th Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and perf boards, these 10K resistors make excellent pull-ups, pull-downs, and current limiters. Need more than one? Checkout our bag of resistors. If you need a bunch of these, you can get good bulk discounts on Digike...

SKU: AF-299

A pack of 25 diffused red 5 mm LEDs, bright enough to be visible in daylight and viewable from any angle thanks to the diffused lens. These are great all-purpose indicator LEDs that fit easily into a breadboard. Specifications Colour: Red Wavelength: 660 nm Diameter: 5 mm Lens Type: Diffuse...

SKU: LB-10M-RESISTOR

A pack of ten 10MΩ (10 megaohm) carbon film resistors rated at 0.25W (¼W) with 1% tolerance. This very high resistance value is commonly used in high-impedance input buffers, electrostatic discharge protection, and leakage current sensing circuits. Key Features 10MΩ, 1% Tolerance – Very high r...

SKU: TB-RR2558

A pack of two 220Ω carbon film resistors rated at 1W continuous power. These through-hole axial resistors are suitable for general-purpose electronics projects requiring higher power handling than standard ¼W resistors. Specifications Resistance: 220Ω Tolerance: ±5% Power Rating: 1W Type: C...

SKU: TB-RR2846

A pack of two 1 MΩ carbon film resistors rated at 1 W continuous power. These through-hole axial resistors feature colour-coded bands for easy identification and solder legs for breadboard or PCB mounting. Specifications Resistance: 1 MΩ Tolerance: ±5% Power Rating: 1 W Type: Carbon film P...

SKU: TB-RR0606

A pack of eight 27kΩ metal film resistors rated at 0.5W. Same physical size as standard ¼W carbon film resistors, these metal film resistors offer tighter ±1% tolerance for applications requiring greater precision. Specifications Resistance: 27kΩ Tolerance: ±1% Power Rating: 0.5W Type: Meta...

SKU: TB-RR2774

A pack of two 1 kΩ carbon film resistors rated at 1 W continuous power. These through-hole axial resistors feature colour-coded bands for easy identification and solder legs for breadboard or PCB mounting. Specifications Resistance: 1 kΩ Tolerance: ±5% Power Rating: 1 W Type: Carbon film P...

SKU: SF-TOL-13114

A dual-sided resistor lead forming tool for bending component leads to precise through-hole spacing. One side handles 1/4W resistors with spacing from 0.4" to 1.5" (10–38mm), and the other handles 1/2W resistors with spacing from 0.5" to 1.5" (13–38mm). Simply insert a resistor into the desired g...