All Products

SKU: SF-WRL-22131 · MPN: WRL-22131

The SparkFun Digi XBee Arduino Shield connects Digi XBee 3 modules to your Arduino, enabling wireless communication via LTE-M/NB-IoT, cellular, and GNSS. Compatible with any through-hole Digi XBee module, this shield features USB-C power, a Qwiic connector for I²C sensors, and a standard Arduino ...

SKU: SF-DEV-19217

We carry several data logging products which have microSD sockets on them: OpenLog Artemis and the Qwiic OpenLog to name but two. They're great for logging data to a microSD card, but when it comes to reading the logged data quickly you usually have to pop out the microSD card and plug it into yo...

SKU: SF-PRT-00548

Ever wanted to see what’s on that SIM card? Use these sockets in your next project to interface to any old SIM. 6-Pin standard connection. This is a surface mount socket, but it is large enough that it can be hand soldered.

SKU: SF-WRL-17841

A compact wide-band internal antenna covering 700–2700 MHz, suitable for 4G LTE, LoRa, BLE, and other RF applications. The FPC radiator element connects via a 100mm coaxial cable with an IPEX (u.FL equivalent) connector, and 3M adhesive backing makes it easy to mount inside enclosures and project...

SKU: DF-DFR1249 · MPN: DFR1249

Add mobile network connectivity to a LattePanda IOTA with this dedicated M.2 4G LTE expansion board. It provides a standard M.2 B-Key slot for installing a compatible cellular module, making it useful where Wi-Fi is unavailable or unreliable.The board connects to the LattePanda IOTA via a direct ...

SKU: SF-DEV-13712

The SparkFun OpenLog is an open-source serial data logger based on the ATmega328 running at 16 MHz. It logs incoming serial data directly to a microSD card, supporting cards from 64 MB to 64 GB in FAT16 or FAT32 format. Simply connect a serial line from your project to the OpenLog, and all transm...

SKU: SF-COM-30416 · MPN: COM-30416

Control higher-power loads from a microcontroller over I2C with this Qwiic relay board. It is built around the Omron G6K-2F-Y DC3 dual-pole/dual-throw relay, letting a low-voltage logic system switch loads up to 1A at 30VDC or 0.3A at 125VAC at 40°C.The board offers both software and hardware con...

SKU: SF-CEL-15054

This high-gain duck antenna is designed for LTE devices that operate in the 690-960MHz and 1710-2690 MHz bands. Combined with an SMA to U.FL Adapter, this duck antenna works perfectly with our LTE Cat M1/NB-IoT Shield.

SKU: SF-KIT-19935

The SparkFun MicroMod mikroBUS™ Starter Kit is designed to give you just what you need to start using the MicroMod and Click ecosystems side-by-side. The core of this kit is designed around the SparkFun MicroMod mikroBUS™ Carrier Board and the SparkFun MicroMod STM32 Processor but you will also r...

SKU: SF-DEV-17047

The SparkFun Qwiic GPIO adds eight additional digital I/O pins to your project via I2C, based on the TCA9534 I/O Expander from Texas Instruments. Read and write pins just like standard Arduino digital pins using the included library — functions mirror familiar pinMode and digitalWrite calls. All...

SKU: SF-LAB-17361

The micro:bit v2 Educator's Lab Pack includes 10 micro:bit v2 boards and everything you need to get you started with the new learning platform. The Lab Pack has everything you need, including micro:bits, cables, battery packs and a few parts to experiment with. This package provides an easy way t...

SKU: SF-BOB-12009

The SparkFun Bi-Directional Logic Level Converter safely translates signals between different voltage levels — stepping 5V down to 3.3V and 3.3V up to 5V on the same channel. It also works with 2.8V and 1.8V devices, making it a versatile bridge between mixed-voltage systems. Each board provides...

SKU: SF-WRL-18567

Ultra. Low. Power. Arguably the best three words in the IoT world. SparkFun has teamed up with ARM and Dialog to provide you with this Qwiic WiFi Shield based around the DA16200 module. The DA16200 is a fully integrated WiFi module with a 40MHz crystal oscillator, 32.768KHz RTC clock, RF Lumped R...

SKU: SF-DEV-13820

The SparkFun ProtoShield Kit lets you customize your own Arduino shield using whatever circuit you can come up with and then test it to make sure everything is working the way it should! The SparkFun ProtoShield Kit is based off the Arduino R3’s footprint that allows you to easily incorporate it ...

SKU: SF-DEV-19957

The SparkFun AzureWave Thing Plus is a Feather form-factor development board equipped with the AW-CU488. The module features the Realtek RTL8721DM integrated single-chip low-power dual-band (2.4GHz and 5GHz) wireless LAN communication controller. It also consists of a dual processor core: Rea...

SKU: SF-BOB-13906

The SparkFun Multiplexer Breakout provides access to all pins and features of the 74HC4051, an 8-channel analog multiplexer/demultiplexer. The 74HC4051 allows you to turn four I/O pins into eight multifunctional, individually selectable signals, which can be used to do everything from driving eig...

SKU: SF-GPS-19663

With GNSS you are able to know where you are, where you're going, and how to get there anywhere on Earth within 30 seconds. This means the higher the accuracy the better! GNSS Real Time Kinematics (RTK) has mastered dialing in the accuracy of their GNSS modules to just millimeters. The SparkFun M...

SKU: SF-SEN-18020

The SparkFun LSM6DSO 6 Degrees of Freedom Breakout is an accelerometer and gyroscope sensor with a giant 9kB FIFO buffer and embedded processing interrupt functions. Due to the capabilities and low cost of the LSM6DSO we've created this small breakout board just for you! Each LSM6DSO breakout has...

SKU: SF-KIT-17362

The SparkFun Inventor’s Kit (SIK) for micro:bit v2 is a great way to get creative, connected and coding with the micro:bit. The SIK for micro:bit v2 provides not only the micro:bit v2 board but everything you need to hook up and experiment with multiple electronic circuits! With the SIK for micro...

SKU: SF-BOB-11771

This is a breakout board for the Texas Instruments TXB0104 module. The TXB0104 is a 4-bit bidirectional voltage-level translator with automatic direction sensing. This 4-bit noninverting translator uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA acc...