All Products

SKU: LB-STEREO

A solder-type 3.5 mm (1/8") stereo TRS plug with a durable metal housing. Ideal for building or repairing custom audio cables, connecting to breakout boards, or adding a standard headphone-size connector to DIY projects. Key Features Metal Construction – Robust metal barrel for durability and ...

SKU: SF-COM-09542

The QRE1113 is a small IR reflectance sensor. This sensor is often used in line following robots because, if it can sense if a surface is white or black. There are four pins on the QRE1113 - two control the IR emitting LED while the other two are the collector and emitter of a phototransisto...

SKU: DF-DFR0034

This is a new Arduino compatible Analog Sound Sensor. Sound Sensor is typically used in detecting the loudness in ambient, the Arduino can collect its output signal and actuate accordingly. You may use it to make some funny interactive works such as a "clap and buzz" to find your lost keys or rem...

SKU: AF-1951

These premium female-to-female jumper wires are ideal for making wire harnesses or connecting between headers on PCBs. Each pack contains 20 wires in a ribbon cable format — two of each of ten rainbow colours — that can be kept together for organised harnesses or separated into individual jumpers...

SKU: AF-816

These right-angle male headers feature a 3-row configuration at standard 0.1" (2.54mm) pitch, making them ideal for connecting three-wire cables such as sensor and servo leads. Each piece is a 3×4 block, and four pieces are included per pack. The right-angle orientation keeps cables running para...

SKU: SF-PRT-09750

A 3-pin right-angle JST PH series through-hole connector with 2mm pin spacing. These compact connectors provide a solid locking connection and are rated for moderate current, making them a reliable choice for PCB-mounted sensor and peripheral connections. Commonly used to interface with Sharp in...

SKU: SF-DEV-09911

A bare OBD-II connector for building custom automotive diagnostic tools and vehicle data interfaces. OBD-II (On-Board Diagnostics II) is a standardised diagnostic port found on most cars, providing access to engine control unit (ECU) data for troubleshooting, monitoring, and data logging. This c...

SKU: SF-PRT-10030

This 2 mm pitch 10-pin SMD socket mates with XBee radio modules from Digi. The surface-mount design is ideal for custom PCBs and production boards where through-hole mounting isn't suitable. You'll need two of these sockets to connect to all 20 pins on an XBee module. Key Features 2 mm Pitch ...

SKU: SF-PRT-10366

A simple 6-pin jumper wire cable with JST RE connectors on both ends. Perfect for board-to-board connections using standard 0.1" (2.54mm) breakaway headers. At 4" (100mm) long, it keeps wiring tidy in compact builds. Specifications Connector – 6-pin JST RE on both ends Pitch – 0.1" (2.54mm) ...

SKU: SF-PRT-10450

Standard Philips-head 4-40 screws. They are 1" long and come in packs of ten. This is the screw size we use in most of the holes for our breakout boards. Check below for other associated hardware.

SKU: SF-PRT-10453

There are your standard Philips-head 4-40 screws. They are ¼" long and come in packs of ten. This is the screw size we use in most of the holes for our breakout boards. Check below for other associated hardware.

SKU: AF-3342

This 2×40 right-angle edge connector fits directly onto the bottom edge contacts of the BBC micro:bit, providing access to all GPIO pins, power, and ground connections. The right-angle design is ideal for mounting on custom PCBs. The connector has 80 pins total, but because the micro:bit edge co...

SKU: AF-3284

The Adafruit Pocket Screwdriver is a compact dual-ended tool that clips onto your shirt or pant pocket so you always have a screwdriver on hand. The Phillips head fits 3.5 mm terminal blocks commonly found on electronics breakout boards, while the slotted head works with the nylon screws included...

SKU: SF-CAB-13028

This 40-pin (2×20) flat ribbon cable connects to the GPIO header on the Raspberry Pi, providing easy access to all GPIO, I2C, SPI, UART, and power pins. The 6-inch (15 cm) length keeps things tidy while giving you room to work with breadboards, breakout boards, and HATs. The cable uses standard ...

SKU: SF-PRT-13054

A 2×20 shrouded (boxed) header designed to match the Raspberry Pi GPIO pinout. It provides a keyed, polarised connection point so you can run a ribbon cable from your Pi's GPIO to a breakout board, HAT prototype, or custom PCB without the risk of plugging in backwards. The through-hole header ha...

SKU: PL-1015

This single-row, 5-pin straight female header with 0.1" (2.54mm) pitch is designed to mate with standard 0.1" male headers. It provides a reliable socket connection for board-to-board and board-to-wire applications. The compact 5-pin length is commonly used for sensor connections and serial inte...

SKU: PL-1021

This single-row, 11-pin straight female header with 0.1" (2.54mm) pitch is designed to mate with standard 0.1" male headers. It provides a reliable socket connection for board-to-board and board-to-wire applications. The fixed 11-pin length makes it a good match for boards and breakout modules w...

SKU: PL-1026

The 0.100″ (2.54 mm) 2×6-Pin Straight Female Header is a double-row, 12-pin socket strip designed to mate with standard 0.1″ pitch male headers. Its 2×6 layout provides a compact, medium-density connection suitable for a variety of embedded applications. A 12-pin dual-row configuration is common...

SKU: PL-1027

The 0.100″ (2.54 mm) 2×7-Pin Straight Female Header is a double-row, 14-pin socket strip designed to mate with standard 0.1″ pitch male headers. The 2×7 layout provides a medium-density connection point suitable for a range of embedded and prototyping applications. A 14-pin dual-row configuratio...

SKU: PL-1030

This single-row, 12-pin straight female header with 0.1" (2.54mm) pitch is designed to mate with standard 0.1" male headers. It provides a reliable socket connection for board-to-board and board-to-wire applications. The fixed 12-pin length makes it a good match for boards and breakout modules w...