All Products

SKU: AF-1818

This 1.2″ 8×8 LED Matrix features 64 amber LEDs arranged in a square grid, perfect for building scrolling signs, simple animations, or small pixel displays. The compact package plugs directly into a breadboard with 0.1″ pin spacing — eight pins on each side. The matrix requires 1:8 multiplex dri...

SKU: AF-1819

This 1.2″ 8×8 LED Matrix features 64 yellow LEDs arranged in a square grid, perfect for building scrolling signs, simple animations, or small pixel displays. The compact package plugs directly into a breadboard with 0.1″ pin spacing — eight pins on each side. The matrix requires 1:8 multiplex dr...

SKU: AF-5201

The Adafruit IS31FL3741 RGB LED Matrix features 117 individually addressable RGB LEDs arranged in a 13×9 grid with 3 mm pitch spacing. Each 2×2 mm LED is driven by the ISSI IS31FL3741 controller chip over I2C, providing 8-bit PWM per colour channel for full 24-bit colour across the entire display...

SKU: AF-3162

These are 9x16 Charlieplexed LEDs designed to match with the Adafruit 16x9 Charlieplexed PWM LED Matrix Driver - IS31FL3731. You don't get any resistors or driver chips with this grid, its just a mess of LEDs in a charlieplexed arrangement This is the Warm White version. Check out ou...

SKU: DF-DFR1033 · MPN: DFR1033

##Introduction Portenta H7 Lite Connected is a high-performance MCU development board with integrated Wi-Fi and Bluetooth connectivity, and is a product in the Arduino Portenta H7 series. It uses the same STM32H7 MCU chip and Cortex-M7/Cortex-M4 core as Arduino Portenta H7, enabling complex multi...

SKU: AF-1611

A soft, squishy 4×4 silicone elastomer keypad with 16 buttons, each designed to fit a 3mm LED for optional backlighting. The conductive pad on the bottom of each button closes a contact underneath when pressed, providing ~3mm of silent travel with a satisfying feel. The keypads can be tiled edge...

SKU: AF-846

Need some really bright and big indicator LEDs? We are big fans of these 10mm diffused white LEDs. They go easily into a breadboard and will add that extra zing to your project. Pack of 25 diffused white LEDs 10mm diameter Cool White color 3.0-3.4V Forward Voltage, at 20mA current 1,000 mcd brigh...

SKU: AF-5996 · MPN: ADA5996

The Adafruit QT Py CH32V203 is a tiny development board built around the WCH CH32V203G6 — a low-cost RISC-V microcontroller running at up to 144 MHz. In the compact QT Py form factor (Seeed Xiao compatible), it packs USB-C, a STEMMA QT connector, an RGB NeoPixel, and 10 GPIO pins into a board sma...

SKU: AF-3151

The Adafruit 0.8" 8x16 LED Matrix FeatherWing Display Kit in green pairs two miniature 8x8 LED matrices with a FeatherWing driver board to create a 128-pixel display for any Feather microcontroller. Use it for scrolling text, bitmap graphics, emoticons, or simple animations. The onboard HT16K33 ...

SKU: AF-3152

The Adafruit 0.8" 8x16 LED Matrix FeatherWing Display Kit in red pairs two miniature 8x8 LED matrices with a FeatherWing driver board to create a 128-pixel display for any Feather microcontroller. Use it for scrolling text, bitmap graphics, emoticons, or simple animations. The onboard HT16K33 I2...

SKU: AF-4352

Build a handheld light-up button controller with this complete kit that pairs the Adafruit 4×4 NeoTrellis RGB Driver with a Feather M4 Express inside an elegant laser-cut acrylic enclosure. The 16 silicone buttons each have individually addressable NeoPixels underneath, and the seesaw I2C chip ha...

SKU: AF-1817

This 1.2″ 8×8 LED Matrix features 64 blue LEDs arranged in a square grid, perfect for building scrolling signs, simple animations, or small pixel displays. The compact package plugs directly into a breadboard with 0.1″ pin spacing — eight pins on each side. The matrix requires 1:8 multiplex driv...

SKU: AF-3153

The Adafruit 0.8" 8x16 LED Matrix FeatherWing Display Kit in yellow pairs two miniature 8x8 LED matrices with a FeatherWing driver board to create a 128-pixel display for any Feather microcontroller. Use it for scrolling text, bitmap graphics, emoticons, or simple animations. The onboard HT16K33...

SKU: AF-4372

This laser-cut acrylic enclosure kit turns your 8×8 NeoTrellis setup (four 4×4 NeoTrellis boards) into a handheld device with an elegant black and white design and beautifully diffused button illumination. Designed to house any Adafruit Feather board (except FONA) alongside four NeoTrellis RGB Dr...

SKU: AF-4202

Need some miniature indicators? We are big fans of these diffused LEDs. They are fairly bright, so they can be seen in daytime, and from any angle. They go easily into a breadboard and will add that extra zing to your project.Now you can get a pack of 25 with 5 different colors Pack of 25 diffuse...

SKU: AF-1271

Drive large 1.2" tall 7-segment displays with ease using this HT16K33-based I2C backpack. The updated design includes a built-in 5V boost converter so you get bright, consistent LED segments even when running from 3.3V power — no separate 5V supply needed. STEMMA QT / Qwiic connectors provide plu...

SKU: AF-2077

The Adafruit Proto Shield for Arduino (R3) is a versatile prototyping shield with a 0.1" grid, power rails, indicator LEDs, and stacking headers — everything you need to build custom circuits on top of your Arduino. Version R3 is compatible with virtually all Arduino boards including UNO, Mega, L...

SKU: DF-DFR0129

A capacitive touch sensor kit for Arduino based on the MPR121 touch controller. Includes three interchangeable touch pads — a scroll wheel, a keypad with backlight support, and a grid pad for gesture and pattern recognition. The MPR121 provides sensitive capacitive detection over an I²C interface...

SKU: AF-5774

The Adafruit Swirly Aluminum Mounting Grid provides a mechanical substrate for mounting small microcontroller boards, sensors, and Feathers that use STEMMA QT plug-and-play connections. When you're snapping boards together with I2C cables instead of using a breadboard, this grid gives your projec...

SKU: AF-5646

Add a dazzling 5×5 grid of 25 addressable RGB NeoPixels to any QT Py or Xiao board with this compact BFF (Best Friend Forever) add-on. The tiny SK6805 LEDs (1.5 × 1.5 mm each) pack vivid colour into a minimal footprint, powered directly from the QT Py's USB Type-C connection. The PCB is designed...