All Products

SKU: SF-WRL-15663 · MPN: WRL-15663

Built around Espressif's ESP32-WROOM module, this Feather-compatible development board is a handy starting point for WiFi, Bluetooth and battery-powered IoT projects. The dual-core Xtensa 32-bit LX6 processor runs at up to 240MHz, with 16MB of embedded flash and 520KB of internal SRAM on hand for...

SKU: WS-31334 · MPN: 31334

Unleash Your Creativity with the ESP32-S3 3.5inch Capacitive Touch Display Development Board Type BExplore the endless possibilities of IoT development with the cutting-edge ESP32-S3 3.5inch Capacitive Touch Display Development Board Type B. Crafted by the innovators at Waveshare, this all-in-one...

SKU: DF-DFR0015

An XBee-compatible shield for Arduino that supports a wide range of wireless communication modules including ZigBee, WiFi, and Bluetooth 2.0/4.0 bee-format boards. Stacks directly onto Arduino Uno, Leonardo, or Mega, with a built-in 5 V to 3.3 V level converter for safe interfacing with 3.3 V mod...

SKU: DF-DFR1140

FireBeetle 2 ESP32-UE (N16R2) is a powerful IoT microcontroller that supports external Bluetooth & WiFi antennas and features 16M Flash and 2M PSRAM. This product enhances memory capacity and operating space, enabling superior performance for applications such as the LVGL graphics library for int...

SKU: DF-SEN0231

The Formaldehyde (HCHO) sensor is an Arduino & Raspberry Pi compatible module, which is the ideal solution for indoor air quality monitor. This is a HCHO(CH2O) sensor module. It can be used to measure HCHO in air. Through it, you can know the air quality. This sensor module is widely used ...

SKU: LB-LR0013

This RGB LED module gives your microcontroller project a simple way to add full-colour light. It uses a common-cathode through-hole RGB LED, with separate red, green and blue channels for mixing colours.Each colour channel has a built-in current-limiting resistor, helping protect the LED from bur...

SKU: SF-WRL-24243 · MPN: WRL-24243

It's time to supercharge your next project with the SparkFun RA6M5 Thing Plus! Clocking in at 200MHz, the RA6M5 is a high-performance microcontroller from Renesas that is perfect for real-time applications. This translates to smooth responsiveness, lightning-fast data processing, and the ability ...

SKU: SF-WRL-19177

The SparkFun IoT RedBoard is an ESP32 Development Board that includes everything but the kitchen sink! Espressif's ESP32 WROOM is a powerful WiFi and Bluetooth® MCU module that targets a wide variety of applications. At the core of this module is the ESP32-D0WDQ6 chip which is designed to be b...

SKU: LB-LR0085

The 0.96″ 128×64 OLED Display Module delivers crisp, high-contrast visuals in a compact 27 × 27 mm package. Driven by the SSD1306 controller over I2C, it requires only two I/O pins and operates across a wide 3.3–5V range, making it compatible with Arduino, STM32, ESP32, and other popular microcon...

SKU: LB-TOUCAN

The Little Bird Toucan is an smart RGB LED HAT designed for the Raspberry Pi!Based on the APA102, the Toucan packs 8 super-bright LEDs.Each of the LEDs are dimmable, and individually controllable (Raspberry Pi Rainbow LEDs anyone?)!You can use the Toucan for creating Raspberry Pi LEDs status i...

SKU: PR-PIM375

A really sophisticated and accurate colour and luminance sensor breakout that's Raspberry Pi and Arduino compatible. As well as detecting RGB colour and light level, it has added bells and whistles like 50/60Hz light noise rejection, a wide detection range, and two illumination LEDs. T...

SKU: SF-WRL-17506

The SparkFun expLoRaBLE Thing Plus is a Feather-footprint development board with the NM180100 system in package (SiP), from Northern Mechatronics. Thanks to the NM180100, as well as the Ambiq Apollo3 microcontroller and the Semtech SX1262 LoRa transceiver, this Thing Plus is a highly integrate...

SKU: DF-DFR0225

RoMeo V2 [R3] is an All-in-One Arduino based robot board, it is especially designed for robotics applications, and extended devices. Romeo benefits from the Arduino open source platform, it is supported by thousands of open source projects, and can easily be expanded with Arduino Shields. The ...

SKU: SF-WRL-20854

The SparkFun NINA-B306 Thing Plus offers a unique combination development platform in the Thing Plus form factor featuring the NINA-B306 from u-blox™, the ISM330DHCX 6DoF IMU from STMicroelectronics™ and the BME280 atmospheric sensor from Bosch Sensortec™. The NINA-B306 is a combination Bluet...

SKU: DF-TEL0163

The A7670G is a global 4G CAT1 communication module that brings cellular connectivity to your IoT projects. With support for LTE-FDD, LTE-TDD, and GSM bands worldwide, it provides reliable data transmission at up to 10 Mbps downlink and 5 Mbps uplink. It's compatible with Arduino, Raspberry Pi, a...

SKU: DF-DFR1145 · MPN: DFR1145

The FireBeetle 2 ESP32-S3 (N4) is a main control board based on the Espressif ESP32-S3-WROOM-1-N4 module. It features a 32-bit dual-core processor, 4M FLASH memory, and supports WiFi and Bluetooth 5.0 communication. The board is equipped with AI acceleration capability, making it suitable for low...

SKU: DF-EDU0157-EN · MPN: EDU0157-EN

The Lark Weather Station is a compact, all-in-one portable weather device that measures wind speed, wind direction, temperature, humidity, and air pressure. It supports real-time data output via I2C and UART, making it compatible with Arduino, micro:bit, Raspberry Pi, ESP32, and UNIHIKER controll...

SKU: DF-DFR0523

Gravity: digital peristaltic pump is a new product developed by DFRobot. This is a new member of our water quality monitoring devices. It is an actuator for the liquid system. DFRobot peristaltic pump integrates a PPM motor driver on the pump, this is a Gravity interface (PH2.0-3P) motor...

SKU: AF-5956 · MPN: ADA5956

The Adafruit USB Host BFF adds a USB Host port to your QT Py or Xiao microcontroller, letting you connect keyboards, mice, USB drives, and other standard USB peripherals to your tiny project. It uses the MAX3421E USB Host chip, communicating over SPI with an IRQ pin. With driver support through ...

SKU: DF-SEN0605 · MPN: SEN0605

##Introduction The Soil Sensor is designed to measure and monitor the nitrogen (N), phosphorus (P), and potassium (K) levels in soil, enabling the optimization of soil fertility and creating ideal conditions for plant growth. With a broad voltage power supply range of 5-30V and data output throug...