All Products

SKU: SF-PRT-17260

This is a 50mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but can be used for other applications as well. The cable insulation is made from silicon making it more flexible than our original Qwiic cable particularly in t...

SKU: AF-4399

This 4-wire cable is 50mm / 1.9" long and fitted with JST SH female 4-pin connectors on both ends. Compared with the chunkier JST PH these are 1mm pitch instead of 2mm, but still have a nice latching feel, while being easy to insert and remove. This cable can be used with Qwiic or STEMMA ...

SKU: SF-CAB-29325 · MPN: CAB-29325

This short mini coax lead links U.FL-equipped RF submodules and other RF devices to carrier boards. At 50mm long, it is designed to be long enough to make the connection while staying tidy inside compact builds.The 50-ohm impedance makes it well suited to almost all SparkFun RF products, includin...

SKU: AF-6034 · MPN: ADA6034

A compact 22-pin flexible flat cable (FPC) with 0.5mm pitch, just 5cm in length. This A-B style cable has matching pin orientation on both ends — pin 1 on one side aligns with pin 1 on the other — ideal for compact builds where the peripheral sits close to the main board. Designed to work with R...

SKU: AF-5931 · MPN: ADA5931

This PCIe Flex Cable gives you a variety of options for connecting and placing your Pimoroni NVMe Base with Raspberry Pi 5. They have a 'one way' design with 16 pads at the Raspberry Pi 5 end and 18 pins at the NVMe Base end to prevent incorrect installation. The designed is set up for PCIe Gen 3...

SKU: SF-CAB-24012 · MPN: CAB-24012

This is a 50mm long ESLOV to ESLOV cable. The ESLOV connector has five pins (one more than standard I2C) for automatically configuring the module and handling the sleeping states to boost battery life. Use this cable to connect two ESLOV boards together, or use this along with the SparkFun ESLOV ...

SKU: SF-CAB-28302 · MPN: CAB-28302

A short 22-pin flexible flat cable (FPC) with 0.5mm pitch, just 5cm in length. This A-B style cable has matching pin orientation on both ends – pin 1 on one side aligns with pin 1 on the other – ideal for compact builds where the camera or display sits close to the main board. The short length m...

SKU: SF-PRT-28203 · MPN: PRT-28203

  The SparkFun Qwiic 5V Boost simplifies interfacing 5V I2C devices with the 3.3V Qwiic ecosystem. It takes the 3.3V I2C signals and power from its Qwiic connectors and boosts them to 5V, available on the PTH pins. This is perfect for powering peripherals like RGB LEDs or DC fans commonl...

SKU: DF-DFR0550-V2 · MPN: DFR0550-V2

A 5-inch IPS capacitive touchscreen display with 800×480 resolution, designed for direct connection to Raspberry Pi via the DSI interface. Features optical bonding (full lamination), anti-fingerprint and anti-glare surface treatment, and a high brightness of 550 cd/m² — performing well even in ou...

SKU: AF-5462

Connect this to that when an 18-pin FPC connector is needed. This 50mm long cable is made of a flexible PCB. It's A-B style which means that pin one on one side will match with pin one on the other side. How handy! We're stocking this to fit with our EYESPI-compatible boards, but you could, of co...

SKU: SF-PRT-16766

A surface-mount 4-pin JST connector in a vertical orientation, designed for the SparkFun Qwiic I2C ecosystem. This 1 mm pitch connector is used on all Qwiic-compatible boards and lets you build your own I2C devices that integrate seamlessly with the Qwiic system. The vertical mount profile is id...

SKU: AF-1492

Break out those tricky 0.5 mm pitch flex cable connections to breadboard-friendly 0.1" spaced headers with this FPC adapter board. The 50-pin connector on top accommodates most ZIF and snap-style FPC connectors, and each pin is broken out to a standard 0.1" × 0.1" header pad for easy prototyping....

SKU: SF-CAB-17261

This is a jumper adapter cable that comes pre-terminated with a female Qwiic JST connector on one end and female connectors on the other. The cable insulation is made from silicon making it more flexible than our original Qwiic cable particularly in tight spaces or enclosures. This cabl...

SKU: SF-SEN-29529 · MPN: SEN-29529

This ultra-small Qwiic-enabled breakout adds three-axis acceleration sensing to compact projects using the LIS3DH, a smart, low-power capacitive micro-machined accelerometer with 12-bit resolution. It can be used for translation detection and is classified as a 3DoF, or 3 Degrees of Freedom, sens...

SKU: AF-6024 · MPN: ADA6024

Add tiny points of addressable colour to costumes, props, wearables and embedded builds without fighting a fragile flexible PCB. This NeoPixel strand uses solid plated wire cords that hold their shape, making it easier to sew over, cast into a structure or route through a costume.The strand has a...

SKU: SF-PRT-17912

This is a jumper adapter cable that comes pre-terminated with a female Qwiic JST connector on one end and a breadboard hookup pigtail on the other. The cable insulation is made from a highly malleable material making it more flexible than our original Qwiic cable particularly in tight spaces o...

SKU: AF-6023 · MPN: ADA6023

For wearable builds and sculptural lighting, this NeoPixel strand gives you lots of tiny RGB points without a flexible PCB to crack. Each coated NeoPixel sits on soft plastic-coated plated wire, so the strand can be shaped, sewn over, or embedded into costumes, props, castings and other structure...

SKU: SF-KIT-15367

The SparkFun Qwiic Kit for Raspberry Pi provides everything you need to start using I2C sensors and displays with your Raspberry Pi via the Qwiic connector system. The kit includes a Qwiic HAT that adds four Qwiic connectors to your Pi's GPIO header, along with three sensor/display breakouts and ...

SKU: SF-SEN-19013

The SparkFun Qwiic Mini ToF Imager is a 64-pixel Time-of-Flight ranging sensor built around the STMicroelectronics VL53L5CX. It provides multizone distance measurements up to 4000 mm across a 4×4 or 8×8 grid with a 63° diagonal field of view. The compact Mini version measures just 12.7 × 25.4 mm ...

SKU: SF-GPS-28766 · MPN: GPS-28766

  Achieve survey-grade, millimeter-level precision with your Raspberry Pi using the SparkFun mosaic-X5 GNSS Flex pHAT. This top-tier PNT add-on for the Raspberry Pi combines our versatile pHAT carrier with the industrial-grade Septentrio mosaic-X5, a compact and powerful RTK receiver eng...