All Products

SKU: DF-ROB0004

The HCR (Home Care Robot) Mobile Robot Platform is a two-wheel-drive robot chassis with a three-level structure, designed for building indoor service and research robots. The kit includes two DC motors with integrated encoders, two rubber wheels, an omni-directional caster wheel, three collision ...

SKU: DF-ROB0021

The HCR Mobile Robot Kit is a two wheel drive mobile robot platform with three levels (if you want, you can use only the parts you need, or make a two level robot). The mobile robot kit contains two motors, two wheels, an omni-directional wheel, and hardware accessories such as metal plates...

SKU: DF-ROB0124

The HCR (Home Care Robot) is a full-metal open-source mobile robot research platform designed for robotics research and service robot application development. Equipped with three high-torque omni wheels with encoders, it is capable of omnidirectional translational and rotational motion. The plat...

SKU: DF-SEN0305-2 · MPN: SEN0305-2

This kit combines the HUSKYLENS AI machine vision sensor with DFRobot's Devastator Tank Mobile Robot Platform and the Romeo V2 Arduino robot board. It is designed for building vision-enabled robots without needing to write complex image-processing algorithms from scratch.HUSKYLENS can recognise f...

SKU: DF-ROB0025

INTRODUCTION The DFRobot 4WD Arduino-Compatible Platform w/Encoders is widely used on the world's self-developed control panel platform. This drive method has a strong obstacle and climbing ability with high strength aluminum alloy body. It features thick acrylic m...

SKU: DF-KIT0085

This is a quality pack for indoor robots especially our Home Care Robot platform, comes with 12V Low noise DC Motor 146RPM, Encoder and Rubber Wheel 136x24mm (Pair). 12V Low noise DC Motor 146RPM w/Encoder One of our favourite customized high quality DC motor. Low noise, high torque ou...

SKU: DF-DRI0056 · MPN: DRI0056

This Gravity haptic driver module is built for Linear Resonant Actuators (LRAs), turning simple I2C commands into crisp tactile feedback for interactive projects. It is powered by the TM6605 driver chip and supports LRA resonant frequencies from 140Hz to 220Hz.The module includes 44 built-in vibr...

SKU: DF-KIT0071

The MiniQ Discovery Robot Kit is a 2WD mobile robot platform based on the MiniQ chassis and the Romeo V2 All-in-One Arduino-compatible controller. It comes with a Sharp GP2Y0A21 distance sensor and 9g micro servo pre-included, making it ready for obstacle avoidance and sensor-based navigation rig...

SKU: DF-MBT0044 · MPN: MBT0044

This expansion board turns a micro:bit or UNIHIKER K10 into a cable-free robotics controller for mobile builds. It provides onboard power from a user-replaceable 18650 cell slot and breaks out motor, servo, Gravity IO and I2C connections for adding sensors, displays, AI cameras and actuators.The ...

SKU: KS-KS0428

The Keyestudio Mini Tank Robot V2.0 is a tracked robotics platform for learning Arduino programming, sensor integration, and smart robot construction. It supports obstacle avoidance, line following, IR remote control, Bluetooth app control, ultrasonic following, and facial emoticon display — all ...

SKU: DF-KIT0044

This is a DFRobot designed black rubber wheel kit. The custom-designed kit contains two 136mm rubber tires tested over 6 indoor conditions,packed with shaft couplings, two M8 screws and 2 washers. Designed to fit on DFRobot HCR(Home Care Robot) platforms and other indoor mobile robots, the ...

SKU: WS-20380

The PicoGo is a smart mobile robot platform designed for the Raspberry Pi Pico. It integrates line-following, obstacle avoidance, ultrasonic ranging, object tracking, Bluetooth and IR remote control, an LCD display, and RGB LEDs — all on a single board with no messy external wiring. Powered by t...

SKU: DF-ROB0148-EN · MPN: ROB0148-EN

Maqueen Lite is a compact educational robot platform designed for use with a BBC micro:bit, making it a friendly starting point for STEAM lessons, coding clubs and home learning. It keeps the simple, playful style of micro:bit while adding a mobile robot base for experimenting with movement, sens...

SKU: DF-DFR1063 · MPN: DFR1063

The Romeo Mini ESP32-C3 is a compact robot control board with an onboard ESP32-C3 module providing Wi-Fi and Bluetooth 5 dual-mode communication. It features two channels of 1.7A motor drivers, servo control, and 9 Gravity-compatible I/O interfaces — all in a tiny 47mm × 38.5mm form factor. A bu...

SKU: DF-FIT0520

A 6V brushed DC motor with a 20:1 metal gearbox and an integrated quadrature encoder. The encoder provides 11 counts per revolution of the motor shaft, corresponding to 224.4 counts per revolution of the gearbox output — giving precise speed and position feedback for closed-loop motor control. T...

SKU: AF-3244

A compact three-layer round robot chassis kit with two DC drive motors, matching wheels, and a caster ball for balance. The high-strength anodised aluminium alloy frame provides a sturdy platform for building your own 2WD mobile robot, with three layers of mounting space for batteries, controller...

SKU: EC-ACC35076R

This video tank robot vehicle uses ESP32 as the main board, with OV2640 camera, and can control the movement via WiFi. It has a digital microphone interface, which can adjust the volume. The APP can control the shooting, and transmit video recordings to the APP in real-time. It has two lights at ...

SKU: PL-2739

The Pololu AltIMU-10 v5 is a compact inertial measurement unit (IMU) and altimeter that combines a gyroscope, accelerometer, magnetometer, and barometric pressure sensor on a single board. It provides ten independent measurements — pressure, 3-axis rotation, 3-axis acceleration, and 3-axis magnet...

SKU: DF-ROB0148-EN-5 · MPN: ROB0148-EN-5

Bring micro:bit robotics into the classroom or makerspace with Maqueen, a compact educational programming robot platform designed for STEAM learning. It keeps the simple, playful style of micro:bit while adding motors, sensors, lights and expansion interfaces for hands-on coding activities.This b...

SKU: DF-ROB0049

The DFRobot MiniQ 2WD robotic platform is a compact, round chassis designed for students and hobbyists. At just 122 mm in diameter, it's ideal for indoor applications including maze competitions, educational courses, and rapid prototyping of robot designs. The platform features high-quality N20 ...