All Products
Showing 1-20 of 57 products · 3 unavailable products hidden
Gravity: 0-10V 15-bit High-Precision Dual-Channel ADC Module
·
The Gravity 0–10V ADC Module is a high-precision dual-channel analogue-to-digital converter designed to interface industrial-grade 0–10V sensors with microcontrollers and Linux-based systems. Built on the Texas Instruments ADS1115, it delivers 15-bit resolution (0.375 mV per step) with ±2 mV accu...
Gravity: Digital Capacitive Touch Sensor For Arduino
A digital capacitive touch sensor from DFRobot's Gravity series. It detects touch through the same capacitive sensing technology used in smartphones — even through thin cloth or paper. The sensor outputs a digital high/low signal, making it a simple drop-in replacement for mechanical buttons in A...
Gravity: Digital 360° Tilt Sensor for Arduino
This sensor contains a metal ball that moves along its special internal structure on the effect of gravitation force so as to make a connection or disconnection. Therefore, it can be used as a simple tilt switch. With digital input, this sensor can be used with an Arduino expansion board to reali...
Gravity: Digital Tilt Sensor for Arduino / Raspberry Pi
This is an arduino tilt sensor. It is used to detect orientation. Inside the sensor, there is a ball that make contact with the pins when the case is upright. Tilt the sensor over and the balls don't touch, thus not making a connection. Here is the principle of tilt sensor to illustrate how i...
Gravity: Haptic Motor Driver for LRA Motors
·
This Gravity haptic driver module is built for Linear Resonant Actuators (LRAs), turning simple I2C commands into crisp tactile feedback for interactive projects. It is powered by the TM6605 driver chip and supports LRA resonant frequencies from 140Hz to 220Hz.The module includes 44 built-in vibr...
Gravity: Arduino PIR (Motion) Sensor
A passive infrared (PIR) motion sensor from DFRobot's Gravity series. It detects infrared radiation from people and animals in motion and outputs a digital HIGH signal when movement is detected — ideal for security systems, occupancy sensing, and automated lighting projects. The sensor operates ...
Gravity: PH3 Sensor (Calibrated) - I2C & UART
This is a sensor that detects phosphine concentration and supports three output modes: analog, I2C, and UART. The probe has been calibrated at the factory, which can quickly and accurately measure the concentration of phosphine in the environment. Can be widely used in the detection of phosphine ...
Gravity: Digital Adjustable Infrared Proximity Sensor for Arduino (0~200 cm)
A digital infrared proximity sensor with adjustable detection range from 0 to 200 cm. Outputs a simple digital signal — HIGH when an obstacle is detected, LOW when clear. The detection threshold is adjustable via a rear-mounted screw, making it easy to tune for different applications. Features t...
Gravity: Geiger Counter Module Ionizing Radiation Detector
This Gravity Geiger Counter Module detects ionising radiation — including nuclear radiation, X-rays, and cosmic rays — using a large M4011 Geiger-Müller tube. When ionising particles pass through the tube, the module outputs a digital pulse that can be counted by any microcontroller to calculate ...
Gravity: Digital 10A Relay Module For Arduino and Raspberry Pi
This Gravity digital relay module is designed for switching external loads from low-voltage controller boards. It suits 5V Arduino boards as well as 3.3V platforms such as Raspberry Pi, BBB, mbed, Intel Joule and Arduino 101.The module uses a high quality 3V relay and supports a wide input range,...
Gravity: I2C ADS1115 16-Bit ADC Module (Arduino Raspberry Pi Compatible)
DFRobot I2C ADS1115 16-bit ADC module can accurately collect and convert analog signals. Through this ADC module, Raspberry Pi can easily use a wide range of Gravity series analog sensors to measure various signals, and perceive this world.Raspberry Pi is a common master control board which is...
Gravity: 4-Digital LED Segment Display Module (Green)
The Gravity 4-Digital LED Segment Display Module features a bright green 7-segment display with four digits, perfect for showing numbers, time, sensor readings, and other data in your projects. It communicates over I2C for simple two-wire connectivity with Arduino, Raspberry Pi, and other microco...
Gravity: Photoelectric Arduino Water Liquid Level Sensor
A photoelectric liquid level sensor that uses optical principles to detect the presence or absence of liquid. With no moving parts, it requires minimal calibration and offers high sensitivity and long service life. The corrosion-resistant polycarbonate probe handles temperatures from −25 °C to 10...
Gravity: I2C Triple Axis Accelerometer - LIS2DH
DFRobot presents the ultra low-power Arduino triple axis accelerometer! This device is based around a MEMS LIS2DH chip solution and has high-performance ultra-low power mode. The module is fitted with a Gravity I2C interface for easy plug and play integration in to your projects. The build in...
Gravity: Starter Kit for Arduino
The Gravity Starter Kit for Arduino is a plug-and-play electronics toolkit designed for beginners and makers getting started with the Arduino platform. It includes a DFRduino UNO R3 microcontroller (fully compatible with Arduino UNO) along with 12 popular sensors and components from DFRobot's Gra...
Gravity GP8600 1-Channel I2C/PWM 16-bit DAC Module
·
This GP8600 module is a high-precision digital-to-analogue converter for connecting logic-level microcontrollers to industrial-style analogue control inputs. It accepts I2C or PWM signals and converts them for applications such as 0-5V, 0-10V and 4-20mA control.It is designed for automation and c...
Gravity: 8-Digital LED Segment Display Module (Red)
An 8-digit red LED segment display module with Gravity I2C interface. This module can display numbers, basic characters, and supports 16 levels of brightness adjustment — ideal for clocks, counters, dashboards, and data readouts in Arduino and Raspberry Pi projects. The Gravity connector makes w...
Gravity: GNSS GPS BeiDou Positioning Module with RTC - I2C&UART
·
##Introduction The Gravity GNSS Positioning & Timing Module integrates satellite positioning functionality and a real-time clock (RTC). The module automatically obtains satellite time based on a preset calibration period and accurately calibrates the onboard RTC chip. This calibration effectively...
Gravity Calibrated NH3 Ammonia Sensor - I2C/UART
·
This calibrated gas sensor measures ammonia concentration in the environment using an electrochemical probe. It supports three output modes — analogue, I2C and UART — so it can slot into a wide range of microcontroller and single-board computer projects.The probe is factory-calibrated for quick s...
Gravity: HCL Sensor (Calibrated) - I2C & UART
This is a sensor that detects hydrogen chloride concentration and supports three output modes: analog, I2C, and UART. The probe has been calibrated at the factory, which can quickly and accurately measure the concentration of hydrogen chloride in the environment. Can be widely used in the detecti...
