All Products
Showing 1-20 of 55 products · 5 unavailable products hidden
DFRobot Gravity Industrial Analog EC Meter Kit (K=1, IP68)
·
This industrial Gravity kit measures electrical conductivity in aqueous solutions, helping you evaluate water quality by tracking dissolved content or salinity. It is suited to hydroponics, aquaculture and environmental water monitoring where long-running measurements are needed.The pro probe is ...
Gravity: Analog Dissolved Oxygen Sensor / Meter Kit For Arduino (Pre-Order)
Measure dissolved oxygen in water for aquaculture, environmental monitoring, natural science projects and general water-quality work. This DFRobot Gravity kit pairs a galvanic dissolved oxygen probe with an analogue signal converter board for easy use with Arduino and other microcontrollers that ...
Gravity: Analog Electrical Conductivity Sensor / Meter(K=10)
Gravity: Analog Electrical Conductivity Sensor / Meter(K=10) OverviewDFRobot Gravity: analog electrical conductivity sensor/meter(K=10) is particularly used to measure the high electrical conductivity liquid, such as seawater, concentrated brine, etc. The measurement range is up to 100ms/cm. This...
Gravity: Analog Turbidity Sensor For Arduino
The Gravity Analog Turbidity Sensor measures water clarity by detecting the level of suspended particles. It works by measuring light transmittance and scattering rate, which change with the amount of total suspended solids (TSS) in the water. The sensor provides both analogue (0–4.5V) and digit...
DFRobot Industrial RS485 Blue-Green Algae Sensor
·
This industrial-grade water quality probe measures blue-green algae, also known as cyanobacteria, in water using the fluorescence principle. The probe and housing are integrated into a single waterproof unit for straightforward deployment in rivers, lakes, ponds and other monitoring sites.It uses...
Gravity: Analog TDS Sensor/Meter for Arduino
The Gravity Analog TDS Sensor is an Arduino-compatible kit for measuring Total Dissolved Solids (TDS) in water. TDS indicates how many milligrams of soluble solids are dissolved per litre — the higher the value, the less clean the water. This sensor outputs a 0–2.3V analog signal that can be read...
DFRobot RS485 Industrial Residual Chlorine Sensor
·
This industrial-grade residual chlorine sensor is designed for precise, reliable water quality monitoring in demanding environments. Its integrated probe and housing measure residual chlorine concentrations, specifically hypochlorous acid and hypochlorite ions, over a 0 to 10 mg/L range.The senso...
DFRobot RS485 Industrial Water EC Sensor K=1
·
This industrial-grade water electrical conductivity sensor combines the probe and housing into a single integrated unit for straightforward installation and reliable measurement. It uses an electrode constant of K=1 and can output conductivity, salinity, TDS and temperature data for multi-paramet...
Gravity: Analog Water Pressure Sensor
The Gravity Analog Water Pressure Sensor measures water or gas pressure and outputs a linear 0.5–4.5 V analogue signal proportional to the applied pressure (0–1.6 MPa). Using the DFRobot Gravity 3-pin interface, it connects directly to Arduino and other 5 V microcontrollers for easy integration i...
Gravity: Arduino EC (Electrical Conductivity) Sensor / Meter
The Gravity EC (Electrical Conductivity) Sensor measures the conductivity of aqueous solutions, providing an analogue output for Arduino and compatible microcontrollers. EC measurement is essential for monitoring water quality, nutrient levels in hydroponic systems, and soil salinity in agricultu...
KnowFlow Basic Water Monitoring Kit
·
Build a DIY water quality monitor for field studies, teaching or environmental projects with the KnowFlow Basic Kit. This Arduino-based kit measures two key water parameters: pH and electrical conductivity (EC).Data can be recorded automatically to a micro-SD card for later analysis, and the Blun...
DFRobot SEN0711 RS485 Ammonia Nitrogen & pH Sensor
·
Built for submerged water monitoring, this industrial-grade probe measures ammonia nitrogen concentration in water, including free ammonia (NH3) and ammonium ions (NH4+). It combines the probe and housing into an integrated design for a simpler, more robust installation.The sensor communicates ov...
Gravity: Photoelectric Arduino Water Liquid Level Sensor
A photoelectric liquid level sensor that uses optical principles to detect the presence or absence of liquid. With no moving parts, it requires minimal calibration and offers high sensitivity and long service life. The corrosion-resistant polycarbonate probe handles temperatures from −25 °C to 10...
Gravity: Analog pH Sensor/Meter Kit V2
The Gravity Analog pH Sensor/Meter Kit V2 is designed to measure the pH of liquids, indicating acidity or alkalinity on a scale of 0–14. It's commonly used in aquaponics, aquaculture, hydroponics, and environmental water testing. The kit includes a laboratory-grade pH probe, a signal conversion b...
Gravity: HCL Sensor (Calibrated) - I2C & UART
This is a sensor that detects hydrogen chloride concentration and supports three output modes: analog, I2C, and UART. The probe has been calibrated at the factory, which can quickly and accurately measure the concentration of hydrogen chloride in the environment. Can be widely used in the detecti...
Gravity: 0-10V 15-bit High-Precision Dual-Channel ADC Module
·
The Gravity 0–10V ADC Module is a high-precision dual-channel analogue-to-digital converter designed to interface industrial-grade 0–10V sensors with microcontrollers and Linux-based systems. Built on the Texas Instruments ADS1115, it delivers 15-bit resolution (0.375 mV per step) with ±2 mV accu...
Gravity: STCC4 True Carbon Dioxide (CO2) Sensor (3-in-1 Air Quality Monitoring, 400 ~ 5000ppm)
·
This Gravity air quality module uses Sensirion’s STCC4 gas sensing chip to directly measure carbon dioxide with the thermal conductivity measurement principle. It is designed for compact, cost-effective indoor monitoring nodes where stable CO₂ readings are needed without complex hardware integrat...
Gravity Flexible Non-Contact Capacitive Liquid Level Sensor
·
This flexible capacitive liquid level sensor detects liquid through the wall of a non-conductive container, so it does not need to touch the liquid itself. It is designed for containers with a wall thickness of less than 5 mm, making it handy for sealed tanks, pipes and other setups where a conta...
Gravity: Water Flow Sensor (1/2) For Arduino
INTRODUCTION The Gravity Water Flow sensor measures the rate of a liquid flowing through it. The YF-S201 water flow sensor consists of a plastic valve body, flow rotor and hall effect sensor. It is usually used at the inlet end to detect the amount of flow. When liquid flows throug...
Gravity: Arduino pH Sensor / Meter Kit
You may check the latest version - Gravity: Analog pH Sensor/Meter Kit V2 to meet your requirements and Liquid Sensor Selection Guide to get better familiar with our liquid sensor series.Need to measure water quality and other parameters but haven't got any low-cost pH meter? Find it difficult t...
