All Products
Showing 1-20 of 36 products · 14 unavailable products hidden
ESP32 WROOM MCU Module - 8MB (Dual Antenna)
The ESP32-WROOM-DA, which is a module that achieves high-quality, wireless connectivity across large areas, using two complementary PCB antennas in different directions. Also, based on its industry-leading technical specifications, the co-existence of WiFi and Bluetooth® (Classic & Low-Energy)...
ESP32-C6 WROOM Module - 16MB (PCB Antenna)
·
The ESP32-C6-WROOM-1 is Espressif's first Wi-Fi 6 module, integrating 2.4 GHz Wi-Fi 6 (802.11ax), Bluetooth 5.3 (LE), and IEEE 802.15.4 (Thread/Zigbee) on a single chip. Built around a high-performance 32-bit RISC-V core clocked up to 160 MHz plus a low-power RISC-V core at 20 MHz, it offers stro...
ESP Terminal- 3.5 inch 480x320 SPI TFT capacitive touch display with OV2640 camera
This handheld terminal is based on the ESP32 controller, equipped with a powerful ESP32-S3 chip, and supports 2.4GHz Wi-Fi and Bluetooth 5 (LE), providing more powerful computing and processing capabilities for IoT terminal applications. It is suitable for various scenarios, such as industrial...
2.4GHz Dipole Swivel Antenna with RP-SMA - 5dBi
A 200 mm (8″) swivel dipole antenna with 5 dBi gain and an RP-SMA connector — the industry-standard fitting found on most WiFi routers and wireless modules. The higher gain compared to the 2 dBi version extends range at the cost of a larger form factor. The swivel joint lets you angle the antenna...
2.4GHz Duck Antenna RP-SMA
A 2.4 GHz rubber duck antenna with 2.2 dBi gain and a reverse-polarity SMA (RP-SMA) connector. At 100 mm (4″) long with 50 Ω impedance, it's a straightforward way to add an external antenna to WiFi, Bluetooth, ZigBee, or other 2.4 GHz RF modules. Key Features 2.2 dBi Gain – Omni-directional co...
2.4GHz Ceramic Chip Antenna
A tiny 2.4 GHz ceramic chip antenna designed for surface-mount PCB layouts. While it won't match the range of a full-size rubber duck antenna, its extremely compact footprint lets you add wireless capability to space-constrained designs. Works well with Nordic Semiconductor ICs and other 2.4 GHz ...
Combination WiFi + Bluetooth 4.0 USB Adapter
A compact USB dongle that adds both Wi-Fi and Bluetooth 4.0 to your computer or single-board computer through a single USB port. Based on the Realtek RTL8723BU chipset, it provides 802.11bgn wireless LAN and Bluetooth Low Energy (BLE) connectivity — ideal for Raspberry Pi, BeagleBone, or any Linu...
ESP32-C3 Mini Development Board, Based on ESP32-C3FN4 Single-core Processor, 160MHz Running Frequency, 2.4GHz Wi-Fi & Bluetooth 5
A compact ESP32-C3 development board based on the ESP32-C3FN4 single-core RISC-V processor running at up to 160 MHz. With 2.4 GHz WiFi (802.11 b/g/n) and Bluetooth 5 (LE), 4 MB onboard flash, and a castellated module design, it's ideal for both breadboard prototyping and direct SMD soldering to c...
Adafruit ESP32-S2 Feather - 2 MB PSRAM and STEMMA QT / Qwiic
The Adafruit ESP32-S2 Feather brings Espressif's single-core ESP32-S2 to the Feather ecosystem with native USB, 2.4 GHz Wi-Fi, 4 MB flash, and 2 MB PSRAM. Native USB support means it can act as a keyboard, mouse, MIDI device, or disk drive — no separate USB-to-serial chip needed. This version in...
ESP32-C6-DevKitM-1 Development Board (4 MB SPI Flash)
·
The ESP32-C6-DevKitM-1 is an entry-level development board built around the ESP32-C6-MINI-1 module, featuring a RISC-V 32-bit single-core processor running at up to 160 MHz. It integrates Wi-Fi 6 (2.4 GHz), Bluetooth 5 (LE), Zigbee 3.0, and Thread 1.3 — making it one of the most connectivity-rich...
Thing Plus RP2350 Wireless Development Board (Ding & Dent)
·
This Thing Plus board is a wireless development platform built around the Raspberry Pi Foundation RP2350 microcontroller. It combines the familiar Thing Plus form factor with Qwiic expansion, a µSD card socket, USB-C, LiPo charging hardware and a fuel gauge for local or remote projects.The RP2350...
ESP32 WiFi-BT-BLE MCU Module / ESP-WROOM-32
The ESP-WROOM-32 is Espressif's flagship WiFi + Bluetooth Classic + BLE module, built around the dual-core Tensilica LX6 microprocessor. It targets a wide variety of applications from low-power sensor networks to demanding tasks such as voice encoding, music streaming, and MP3 decoding — all in a...
SparkFun Thing Plus - ESP32-S2 WROOM
The SparkFun Thing Plus ESP32-S2 WROOM is a Feather form-factor development board built around Espressif's ESP32-S2 SoC with integrated 2.4 GHz Wi-Fi. It features enhanced security over the original ESP32, including transparent flash and RAM encryption, secure boot with signed firmware, and dedic...
ESP32-S3-DevKitC-1 Development Board
The ESP32-S3-DevKitC-1 is an entry-level development board built around the ESP32-S3-WROOM-1 module, featuring integrated Wi-Fi and Bluetooth LE connectivity. The Xtensa dual-core LX7 processor provides hardware acceleration for neural network computing and signal processing, making it well suite...
Raspberry Pi Radio Module 2 (RMC20452T)
·
This compact, certified wireless module is designed for integration into custom PCBs and microcontroller products. It combines the Infineon CYW43439 chipset with single-band 2.4 GHz Wi-Fi 4 (802.11n) and Bluetooth 5.2 Classic + LE, using a SISO architecture with integrated PA, LNA and a shared 2....
SparkFun Thing Plus - ESP32 WROOM (USB-C)
The SparkFun ESP32 WROOM Thing Plus is a Feather-compatible development board built around Espressif's ESP32-WROOM module, featuring USB-C, integrated Wi-Fi and Bluetooth, a microSD card slot, LiPo battery management with fuel gauge, and a Qwiic I2C connector for plug-and-play sensor expansion. ...
CrowPanel Advance 3.5"-HMI ESP32 AI Display for Meshtastic 480x320 Artificial Intelligent IPS Touch Screen with case
The CrowPanel Advance 3.5" is a Meshtastic-ready HMI touchscreen display powered by an ESP32-S3 with an onboard SX1262 LoRa module. It features a 480 × 320 IPS capacitive touch panel, integrated AI voice interaction via microphone and speaker, and a replaceable wireless module design for flexible...
Adafruit QT Py ESP32 Pico - WiFi Dev Board with STEMMA QT
The Adafruit QT Py ESP32 Pico brings the full power of the classic ESP32 into the tiny QT Py form factor. Built around the ESP32-PICO-V3-02 — an all-in-one module with dual-core 240 MHz Tensilica processor, Wi-Fi, Bluetooth Classic + BLE, 8 MB flash, and 2 MB PSRAM — this thumbnail-sized board is...
ESP32-S2-WROVER Module - 4 MB flash and 2 MB PSRAM
The ESP32-S2-WROVER is a Wi-Fi module from Espressif built around the ESP32-S2 SoC — a single-core 240 MHz Xtensa LX7 processor with native USB support, 4 MB flash, and 2 MB PSRAM. It provides 2.4 GHz 802.11b/g/n Wi-Fi connectivity in a compact castellated module form factor. The ESP32-S2 introd...
Raspberry Pi Pico WH
·
The Raspberry Pi Pico WH is the header-ready version of the Pico W — featuring the same RP2040 microcontroller and Infineon CYW43439 wireless chip, but with male headers pre-soldered to all through-hole pads for immediate breadboard use. The CYW43439 provides Wi-Fi (802.11 b/g/n) and Bluetooth 5...
