All Products

SKU: DF-DFR0884

This dual-USB step-down buck converter accepts 8–32V DC input and delivers a regulated 5V output at up to 3A across two USB Type-A ports simultaneously. With over 85% conversion efficiency and built-in reverse-connection and overload protection, it provides a compact and reliable way to power USB...

SKU: LB-00258

We’ve all seen toys and things that change color when you run them under warm water or heat them up in the sun. Some of us were especially mesmerized and had to find out what made them do that. It turns out that this is a property called “thermochromism” and it can be implemented in a number...

SKU: PR-PIM373

The VL53L1X Time of Flight sensor breakout uses a low-power laser to measure distances with excellent accuracy and speed. With a detection range of 4 cm to 4 metres and up to 50 Hz sampling frequency, it's ideal for proximity sensing, presence detection, and collision avoidance on robots. This b...

SKU: SF-GPS-28139 · MPN: GPS-28139

The SparkPNT GNSS Flex Module delivers centimetre-level RTK positioning using the Quectel LG290P receiver with quad-band support (L1, L2, L5, E6/L6) and multi-constellation tracking across GPS, GLONASS, Galileo, BDS, QZSS, and NavIC. With a built-in NIC anti-jamming unit and 1,040 tracking channe...

SKU: DF-DFR1179 · MPN: DFR1179

The ZL9NSQ is a high-performance 3D attitude sensor module that integrates a three-axis accelerometer, a three-axis gyroscope, and a three-axis magnetometer. Featuring a 32-bit ARM Cortex-M4F microprocessor, it utilizes the IMU Motion Engine algorithm along with a 2.4G wireless transceiver and pa...

SKU: SF-COM-18732 · MPN: COM-18732

When your system needs a stable 12V rail from a variable DC supply, this industrial-grade buck-boost converter is built to deliver. It accepts a wide 8 to 36VDC input range and regulates it to 12V for loads up to 6A, or 72W.The buck-boost design automatically switches between stepping voltage dow...

SKU: SF-COM-12096

This 0.012" Flexinol® Actuator Wires (aka shape memory Nitinol) is a one foot long piece of nickel-titanium alloy that can flex and contract when a specific amount of heat or current is applied to it and are made specifically for linear actuators to replace small motors or solenoids. If you are a...

SKU: AF-5779 · MPN: ADA5779

This swirly aluminium mounting grid gives small maker boards a sturdy mechanical base when you are building plug-and-play projects with STEMMA QT boards, sensors, Feathers and other 0.1 inch-spaced PCBs.It is made using a single-sided aluminium-core PCB process, but there is no copper layer — jus...

SKU: SF-DEV-21326 · MPN: DEV-21326

This compact MicroMod processor board adds an STM32F405 to a compatible MicroMod Carrier Board, giving your project an ARM® Cortex®-M4 32-bit RISC core in a small, swappable M.2 module.The bevelled edge connector keys into the MicroMod M.2 socket and is secured with the screw supplied with MicroM...

SKU: EC-RPA32311R

A high-precision real-time clock (RTC) module based on the DS3231 IC, designed to plug directly into a Raspberry Pi B+ (and compatible with Arduino). The DS3231 maintains accurate timekeeping with ±5 ppm accuracy (±0.432 seconds per day) across −40 °C to +85 °C, and includes a coin cell battery b...

SKU: DF-SEN0086

A simple flex sensor 2.2" in length. As the sensor is flexed, the resistance across the sensor increases. Patented technology by Spectra Symbol - they claim these sensors were used in the original Nintendo Power Glove. I love the Nintendo Power Glove. It's so bad! The resistance of the flex s...

SKU: AF-5807 · MPN: ADA5807

This breakout is built around the HUSB238 USB PD sink chip, making it easy to negotiate power from a USB Type-C Power Delivery source without soldering tiny resistors. It plugs into a USB-C cable and uses the CC lines to request a suitable PD voltage.You can configure it with solder jumpers for f...

SKU: AF-1070

This sensor can detect flexing or bending in one direction. They were popularized by being used in the Nintendo PowerGlove as a gaming interface.These sensors are easy to use, they are basically resistors that change value based on how much their flexed. If they're unflexed, the resistance is ...

SKU: PL-2739

The Pololu AltIMU-10 v5 is a compact inertial measurement unit (IMU) and altimeter that combines a gyroscope, accelerometer, magnetometer, and barometric pressure sensor on a single board. It provides ten independent measurements — pressure, 3-axis rotation, 3-axis acceleration, and 3-axis magnet...

SKU: DF-FIT0348

This industrial-grade pH combination electrode features a sensitive glass membrane with low impedance, delivering fast response times, good thermal stability, and excellent reproducibility across the full 0–14 pH range. The Ag/AgCl gel electrolyte reference system provides a stable half-cell pote...

SKU: DF-DFR1097 · MPN: DFR1097

##Introduction SLAMTEC self-developed SL-TOF (SLAMTEC Direct Time-of-Flight)SLAMTEC self-developed L-T0F distance measurement technology improves environmental light immunity and measurement accuracy.A stable and fixed 40-meter measurement radiusEven at 70% reflectance, RPLiDAR S3 can ensure an a...

SKU: AF-2841 · MPN: ADA2841

Add individually addressable RGB plus white lighting to your project with this flexible NeoPixel strip. Each pixel combines red, green, blue and white elements, giving you colourful effects plus a dedicated white channel for brighter white tones.This version is a 1 metre strip with 60 LEDs per me...

SKU: SF-SEN-11319

An adhesive-backed MIFARE Classic 1K RFID tag operating at 13.56 MHz. With 1 KB of readable/writable memory and NFC compatibility, it is suitable for identification, access control, electronic wallet, and IoT sensing applications. The thin, compact sticker format (30 mm diameter, 0.4 mm thick) m...

SKU: PL-1125

A compact, inexpensive brushed DC motor with a 120:1 plastic reduction gearbox, well suited for small robot builds. The motor is rated for 4.5V but runs comfortably in the 3–6V range. The gearbox output shaft is a 3mm D-shape, offset from and parallel to the motor shaft. A built-in safety clutch ...

SKU: PL-2527

Add individually addressable RGB lighting to your project with this 2-metre SK6812 LED strip. Featuring 60 LEDs controlled via a one-wire interface, each pixel can display any colour independently. The flexible, waterproof strip runs on 5V and is compatible with WS2812B protocols. Strips can be ...