All Products

SKU: DF-DFR0201

The Arduino Leonardo is a microcontroller board based on the ATmega32U4, offering the same flash, RAM, and capabilities as the ATmega328 found in the Uno. The key difference is built-in USB communication, allowing the Leonardo to appear as a keyboard, mouse, or serial device to a connected comput...

SKU: DF-DFR0327

The Gravity Arduino Shield for Raspberry Pi brings Arduino-compatible I/O to your Raspberry Pi B+, 2B, 3B, 3B+, or 4B. Built around the ATmega32u4 (Arduino Leonardo), it sits on top of your Pi and gives you access to all standard Arduino shields and sensors alongside the Pi's own GPIO, I2C, SPI, ...

SKU: RB-BLEND

Blend is an integrated developement board, we have "blend"ed Arduino with Bluetooth 4.0 Low Energy (aka BLE or Bluetooth Smart) into a single board. It is targeted for makers to develop low power Internet-Of-Things (IoT) projects quickly and easily. Blend is 100% compatible with sketches and Shie...

SKU: DF-DFR0342

W5500 Ethernet with POE Mainboard is a new member in our Ethernet family. It is based on the ATmega32u4 and W5500 Ethernet chip, which is quite useful to most IOT projects. W5500 chip is a Hardwired TCP/IP embedded Ethernet chip that provides easier Internet connection to embedded systems. It en...

SKU: PI-A000057

The Arduino Leonardo is a microcontroller board based on the ATmega32U4. Unlike previous Arduino boards, the ATmega32U4 has built-in USB communication, allowing the Leonardo to appear as a mouse and keyboard to a connected computer — in addition to a virtual serial/COM port. With 20 digital I/O ...

SKU: PR-PIM110

This is an Arduino-compatible board with integrated 3W stereo amplifier designed for use in arcade projects (like our Picade).It behaves like a keyboard when plugged in via USB and has a default key-mapping (though you can reprogram it using the Arduino IDE). Connections are made using ...

SKU: DF-DFR0225

RoMeo V2 [R3] is an All-in-One Arduino based robot board, it is especially designed for robotics applications, and extended devices. Romeo benefits from the Arduino open source platform, it is supported by thousands of open source projects, and can easily be expanded with Arduino Shields. The ...

SKU: DF-DRI0023

INTRODUCTION Do you want to do some projects with stepper motors such as a drafting instrument, a 3D printer, an auto curtain......? As we all know, regular stepper motors are hard to drive, but with this stepper motor shield, you can easily drive 2 stepper motors vi...

SKU: PI-A000095

The Arduino Esplora is a microcontroller board derived from the Arduino Leonardo, designed for people who want to get up and running with Arduino without learning about electronics first. It comes with a collection of built-in sensors and outputs ready to use straight out of the box — no wiring o...

SKU: EC-ACA32U4CL

The Crowduino Leonardo is a microcontroller board that completely compatible with the Arduino Leonardo. It is based on the ATmega32u4. It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, a power ...

SKU: DF-ROB0102

The Cherokey 4WD arduino mobile robot is a versatile mobile robot jeep compatible with the most popular microcontrollers like DFRduino UNO R3 - Arduino Compatible, Mega2560 (arduino microcontroller board), Romeo V2(an Arduino Robot Board (Arduino Leonardo) with Motor Driver)...etc. Cherokey e...

SKU: PL-2191

Note: This product is manufactured in Italy by affiliates of Arduino Srl, and the product packaging suggests downloading the Arduino IDE from arduino.org. However, we use and recommend using the normal Arduino IDE from arduino.cc, which is the IDE we ensure our Arduino libraries work with. Ard...

SKU: DF-DFR0664

A 2.0" IPS TFT LCD display breakout with 320×240 resolution (RGB565), driven by the ST7789V controller. The wide 80° viewing angles in all directions ensure clear visibility, and the SPI interface makes it compatible with a broad range of microcontrollers including Arduino Uno, Leonardo, ESP32, E...

SKU: DF-DFR0647

A compact 0.91-inch monochrome OLED display module with 128×32 white self-illuminating pixels, driven by the SSD1306 over I2C. The chip-on-back pad design and ultra-narrow PCB (41 × 12 mm) make it ideal for wearables, mini consoles, and space-constrained embedded projects where a small, clear dis...

SKU: AF-1947

The 2.8" TFT Touch Shield with Capacitive Touch plugs directly into an Arduino and provides a bright, full-colour display with a smooth glass capacitive touchscreen and onboard MicroSD card socket. Fully assembled and ready to use — no wiring or soldering required. This shield uses SPI for the d...

SKU: DF-DFR0213

The Dreamer Nano V4 is a surface mount breadboard embedded version of the ATMEGA 32U4 with integrated Micro USB. It has everything that Arduino Leonardo has (electrically).Physically, it is just missing power jack to save space. Using the ATmega32U4 as its sole microcontroller allows it to b...

SKU: DF-DFR0282

The Beetle is one of the smallest Arduino Leonardo-compatible boards available, built around the ATmega32U4 microcontroller running at 16MHz. Despite its tiny size, it delivers the full functionality of an Arduino Leonardo with 10 digital pins, 5 analogue pins, and 4 PWM outputs. With a built-in...

SKU: DF-DFR0221

Featured in Make: The Maker's Guide to Boards, DFRobot Leonardo with Xbee Socket is an Arduino Leonardo variant processor.The Arduino Leonardo is based on the ATmega32u4 chip. It is the latest addition to the Arduino family. Compared with the earlier Arduino controllors, by using the ATmega32...

SKU: DF-DFR0392

DFRduino M0 is the first 32-bit Arduino microcontroller based on ARM Cortex-M0 core that supports 5V logic. If you use a standard UNO-compatible microcontroller in a project, do you ever find that GPIO and processing performance is underwhelming? Upgrading to a Mega style microcontroller is too...

SKU: SF-DEV-13298

The Touch Board from Bare Conductive is an easy-to-use Arduino@Heart board that gives you the ability to turn almost any material or surface into a sensor. Each Touch Board offers 12 electrodes for your a conductive ink or other type of connector that can be drawn or attached to create light s...