All Products

SKU: YH-6000100071

The Yahboom Gamepad is a game controller expansion board for the BBC micro:bit, featuring a joystick, four control buttons, programmable RGB LEDs, a buzzer, and multiple sensor interfaces. It doubles as both a standalone gaming device and a controller for micro:bit-powered robots and cars. The b...

SKU: YH-6000200062

The Yahboom RTR Self-Balancing Robot Car is a ready-to-run two-wheel balancing vehicle powered by an Arduino Uno. Using an MPU6050 gyroscope and a PID-based balance algorithm, the robot maintains stable upright balance with automatic posture recognition to control the balance system on and off. T...

SKU: YH-6000300040

This 2-DOF camera pan-tilt kit from Yahboom pairs two SG90 micro servos with a 480P USB camera module for multi-angle video and image capture. The durable black acrylic bracket holds the servos and camera securely, while the USB 2.0 interface makes connection simple — just plug in and go. With 1...

SKU: YH-6000200060

The Yahboom Smartduino is a 2-in-1 Arduino starter kit and smart robot car based on the Arduino Uno R3. It comes with a high-quality integrated circuit board chassis, two breadboard platforms, and a comprehensive collection of sensors and components — letting you work through 20 beginner electron...

SKU: YH-6000200053

The Yahboom 6WD Off-Road Smart Robot is a high-performance mobile robot kit based on the Arduino UNO. Equipped with a WiFi camera module, Bluetooth 4.0, six independent motors, and an aluminium alloy chassis with adjustable shock absorbers, it handles indoor floors, outdoor lawns, inclined surfac...

SKU: YH-6000200200

The Yahboom Roboduino is a smart robot car kit built around a custom driver expansion board compatible with Arduino Uno R3. Packed with sensors and modules — including ultrasonic ranging, line tracking, IR control, and a Wi-Fi camera — it provides a hands-on introduction to electronics, programmi...

SKU: YH-3000101094

This Raspberry Pi robotic arm is mainly composed of an aluminum alloy bracket, a sturdy chassis, a multi-function expansion board, 6 bus servos and a 0.3MP camera. We built an operating system specifically for it based on ROS Melodic, using Open Source CV and Python3 programming to create a serie...

SKU: YH-6000200063

The Yahboom HelloBot is a micro:bit-powered STEM robot car designed for learners aged 10 and up. It can be built in three different configurations — basic, clip, and lift — using simple screwdriver assembly and reverse-connection sockets that make wiring safe and straightforward. Program the Hel...

SKU: YH-6000100063

The Yahboom micro:bit Starter Kit is a comprehensive learning package designed for beginners exploring electronics and programming with the BBC micro:bit. With 22 types of electronic components, 6 sensor modules, and 23 structured courses, it provides a clear pathway from basic circuits to creati...

SKU: YH-6000200548

DOFBOT-SE is a 6DOF robotic arm developed by Yahboom based on a virtual machine system. It does not require a embedded development board (Jetson NANO/Raspberry Pi), generates control decisions through a PC-side virtual machine, and is driven by an STM32 controller to implement various functions. ...

SKU: YH-6000200061

The Yahboom 4WD Smart Robot is a fully featured Arduino-based robotics kit built around the Arduino UNO R3 controller. The aluminium alloy chassis with four-wheel drive and metal motor brackets provides a sturdy platform for learning robotics, sensor integration, and programming. Most components...

SKU: YH-6000300700

The Yahboom Uno Sensor Expansion Board is designed to simplify connecting sensors and modules to your Arduino Uno. It plugs directly into the Uno's headers and breaks out all pins to convenient PH2.0 anti-reverse sockets, greatly reducing the chance of incorrect wiring while keeping your setup cl...

SKU: YH-3000101267

Yahboom K230 vision module is a high-performance, low-power embedded AI vision processing module designed for edge computing scenarios. It is designed based on the end-side AloT chip of the RISC-V architecture, with 6TOPS equivalent computing power and 1GB RAM. It can be connected to a variety of...

SKU: YH-6000200028

Yahboom micro:bit smart robot is developed with the most popular Micro:bit board as the core controller. Using Micro:bit dot matrix screen as the body, the entire vehicle adopts elaborate metal motor, high-quality battery and firm bracket to create a compact and beautiful appearance. And it is co...

SKU: YH-6000100213

An I/O expansion shield for the Arduino UNO R3 that breaks out every pin with its own VCC and GND, making it simple to connect multiple sensors and modules simultaneously. Stacks directly on top of the UNO with both female sockets and pin headers available for flexible wiring with male or female ...

SKU: YH-6000200153

This Arm:bit is made up of 537 blocks and 4 durable building blocks. The user can control it to complete the 4 degrees of freedom operation and pick up the items by the Android/iOS mobile APP. Its biggest feature is that the base of Arm:bit adopts anti-wrap design, which does not affect the wirin...

SKU: YH-6000300221

The 6WD expansion board is a versatile expansion board tailored for DIY, supporting four major controllers, including Raspberry Pi, Arduino UNO, STM32 and 51 controllers. You can switch between one of them to achieve a variety of creative gameplay. The motor drive module and expansion board are s...

SKU: YH-6000200168

This is a collection of building blocks, programming and creativity. 183 blocks and 1 building block motor, coupled with a Super:bit multi-function expansion board, which can be built into a biped robot that can walk like a human--- Biped:bit. We can control motion state, music and lights of it b...

SKU: YH-6000300085

This is a powerful expansion board that is compatible with four major controllers: Arduino, Raspberry Pi, STM32 and 51 controllers. Meeting your every need for a robotic car, it can ensure that the onboard module resources are not affected after switching any version of the controller, and the se...

SKU: YH-6000200043

 This Raspberry Pi TrikeBot three-wheel robot is designed with a bionic shape. From the front, it looks like a robot driving a car on the road. The TrikeBot robot is made of 2mm thick aluminum alloy, with smooth blue oxide sandblasting on the surface. Some parts are made of 3D printing and ...