Little Bird
Yahboom Smartduino starter kit and smart robot 2in1 for Arduino Uno R3 compatible with Scratch3.0
The Yahboom Smartduino is a 2-in-1 Arduino starter kit and smart robot car based on the Arduino Uno R3. It comes with a high-quality integrated circuit board...
The Yahboom Smartduino is a 2-in-1 Arduino starter kit and smart robot car based on the Arduino Uno R3. It comes with a high-quality integrated circuit board chassis, two breadboard platforms, and a comprehensive collection of sensors and components — letting you work through 20 beginner electronics experiments and then build a fully functional robot car with 12 smart functions.
The kit supports C programming via the Arduino IDE, as well as graphical programming through Mixly and Scratch 3.0. All experiments use breadboard connections (no soldering required), and the robot can be controlled via IR remote or Bluetooth app (Android).
Key Features
- 2-in-1 Design – Electronics starter kit and smart robot car in one package
- Arduino Uno R3 – Included as the core controller
- No Soldering – Breadboard-based connections with socket wiring
- 3 Programming Options – Arduino IDE (C), Mixly, and Scratch 3.0
- 20 Beginner Experiments – LED, buzzer, LCD, sensors, and more
- 12 Robot Functions – Line tracking, IR/ultrasonic obstacle avoidance, following, and more
- Bluetooth & IR Control – Android app and IR remote controller included
Robot Functions
- Line tracking
- Infrared obstacle avoidance
- Ultrasonic obstacle avoidance
- Object following
- IR remote control
- Bluetooth app remote control (Android)
Resources
Package Contents
- 1× Arduino Uno R3
- 1× Smart car chassis
- 2× Gear motors
- 2× Car wheels
- 1× Universal wheel (caster)
- 4× Motor fixing brackets
- 2× Pan-tilt boards
- 1× SG90 servo
- 1× Ultrasonic sensor
- 1× Infrared receiver
- 1× Flame sensor
- 2× Photoresistors
- 2× Thermistors
- 1× Tilt/vibration switch
- 1× Bluetooth module
- 1× LCD1602 display
- 1× 1-digit 7-segment display
- 1× 4-digit 7-segment display
- 1× 8×8 LED matrix
- 1× 74HC595 shift register IC
- 15× LEDs
- 2× Active buzzers
- 4× Buttons
- 3× Potentiometers
- 20× Resistors
- 1× 830-hole breadboard
- 2× Mini breadboards
- 30× Male-to-male jumper wires
- 25× Dupont jumper wires
- 1× Male-to-male cable
- 1× Mini IR remote controller
- 1× Battery box
- 2× 14500 Li-ion batteries
- 1× Charger
- 1× Hardware fittings pack
- 1× Mini component box
- 1× Storage box
- 1× Double-head screwdriver
- 1× Manual
Jargon buster
Plain-language definitions for the technical terms used above.
- IDE
- Short for Integrated Development Environment, a program used to write, run and manage code. It matters because some learners prefer a traditional coding workspace instead of a guided notebook-style lesson.
- LCD
- LCD stands for liquid crystal display, a screen technology that uses a backlight and liquid crystals to show images or text. It matters because LCD modules usually need a display driver and enough controller pins or a bus interface to send image data.
- LED
- A light-emitting diode is a small electronic component that lights up when current flows through it in the correct direction. In this kit, LEDs create the flashing effect, so polarity and correct soldering matter for the project to work.
- male-to-male
- A male-to-male cable has plug-style connectors on both ends rather than a socket on one end. This matters when choosing a cable because it must match the female sockets on the modules or boards you want to connect.
- servo
- A servo is a motor with built-in position control, usually told to move to a specific angle by a control signal. It matters when you need repeatable movement, such as steering, arms, flaps, or linkages, rather than continuous spinning.
Find this product in
Brands
Robotics & Motion
STEM & Education
Related Tutorials
Free guides on learn.littlebird.com.au
