All Products

SKU: AF-4259 · MPN: 4259

If you need to add a panel-mount connection for USB C, but don't have the time or tools to cut a custom oval or square hole, this Round Panel Mount Plug is the easiest and fastest way to panel-ify your project. It's about 30mm in diameter, so you can drill a hole in your wood, plastic or metal wi...

SKU: EC-ARS04053S

The SIM5360E series is Dual-Band HSPA+/WCDMA and Quad-Band GSM/GPRS/EDGE module solution in a SMT type which supports HSPA+ up to 14.4Mbps for downlink data transfer.supports 3G network and combines GPS technology for satellite navigation. Besides, it also supports A-GPS that available for indoor...

SKU: EC-DRA09012K

An accessory kit for the Raspberry Pi Zero and Zero W that provides adapters and headers to expand the board's compact connectors to full-size interfaces. Includes a clear acrylic case, USB OTG cable, Mini HDMI adapter, GPIO breakout cable, and a full set of header strips. Key Features USB OTG...

SKU: DF-SEN0385

This is an SHT31 Temperature & Humidity sensor housed in a weather-proof enclosure. The sensor is designed to be waterproof so you can use it safely in outdoor projects. Please note that although the sensor is waterproof, it is not suggested to submerge it in water. For in-water measurement, the ...

SKU: SF-PRT-18582

This IR proximity contactless button makes for a good replacement for typical push buttons in situations where touching the button isn't required or desirable (especially in this day and age). This button includes a built in microcontroller to handle interference or noise, a red/blue status LED g...

SKU: WS-21322

The Waveshare 10.5" AMOLED Touch Display delivers stunning 2K visuals at 2560×1600 resolution with 4.09 million self-emitting pixels. Unlike traditional LCD panels, the AMOLED technology provides true black levels (virtually 0 nit), 100,000:1 contrast ratio, and full 100% Adobe RGB / 100% DCI-P3 ...

SKU: EL-3106156

A compact Bluetooth keyboard with a mounting bracket designed for the Raspberry Pi 4 Touchscreen Case. The bracket screws into the fixing points on the bottom of the touchscreen case, creating a neat, portable workstation for your Raspberry Pi. With built-in rechargeable lithium battery and mult...

SKU: KI-35164

The Kitronik TriColour LED board is a pre-built strip board designed for low-power lighting displays, such as edge-lit signs and illustrations. It has been designed such that its power requirement is within the supply rating of a computer USB port (under 100mA). The Tri-Colour board features ...

SKU: AF-5627

A curated electronics kit built around the Adafruit CLUE board and PyLeap — Adafruit's app for wirelessly transferring code and assets from the Learn system directly to your device. No complicated setup or USB cable needed for programming once you're connected via Bluetooth. The CLUE board packs...

SKU: WS-24483

This 8" capacitive touch display features a wide colour gamut IPS panel (82% NTSC) at 1280×800 resolution with 178° viewing angles. The optically bonded toughened glass panel provides clear, dust-resistant visuals with up to 6H hardness. It connects via HDMI or USB Type-C for both video and touch...

SKU: WS-24484

The Waveshare 10.1" Wide Colour Gamut Capacitive Touch Display delivers vibrant visuals with an NTSC 82% colour gamut IPS panel at 1280×800 resolution and 178° viewing angles. The optically bonded toughened glass touch panel (6H hardness) supports up to 10-point capacitive touch, while the alumin...

SKU: WS-24784

This Waveshare 13.3″ AMOLED display delivers a 2560×1440 (2K QHD) resolution with 100% sRGB and 100% DCI-P3 colour gamut coverage. The AMOLED panel produces true blacks and vivid colours with a 178° viewing angle, making it a significant step up from conventional LCD monitors for both embedded pr...

SKU: AF-5993 · MPN: ADA5993

The Adafruit USB Type C Vertical Breakout (Downstream Connection) provides easy access to all the pins on a USB-C connector in a vertical orientation, ideal for breadboard use and enclosure mounting. Two 5.1K resistors on the CC pins signal the upstream host to provide 5V at up to 1.5A, mimicking...

SKU: WS-28945 · MPN: 28945

The Waveshare 15.6" FHD Monitor (C) is a portable touchscreen display with 1920×1080 IPS panel, 10-point capacitive touch, and a built-in 10,000mAh battery providing 3–4 hours of untethered use. The screen is optically bonded to toughened glass with 6H hardness, reducing glare and improving touch...

SKU: DF-DFR1129 · MPN: DFR1129

##Introduction The Gravity: Photo Interrupter Module integrates a high-performance ITR9608 photoelectric switch. Its compact design and easy operation make it an ideal choice for electronic projects and applications. Whether for robotics, automation equipment, or counting systems, this module pro...

SKU: AF-1904 · MPN: 1904

The Adafruit Micro Lipo with MicroUSB Jack is a compact charger for single-cell 3.7V/4.2V lithium polymer and lithium ion rechargeable batteries. Plug in any Micro USB cable to a USB power source and connect your battery via the JST connector — two LEDs show status at a glance (red = charging, gr...

SKU: AF-3559 · MPN: 3559

A straight Micro HDMI socket adapter for building custom HDMI cables using DIY HDMI ribbon cable and flex cable clips. Simply attach this adapter to one end of a compatible HDMI ribbon cable and choose any other HDMI adapter for the opposite end. Tested with Raspberry Pi at 1080p. Note that DIY ...

SKU: AF-2800 · MPN: 2800

A micro-sized NFC/RFID transponder built around the NXP NTAG203 chip operating at 13.56 MHz. Its tiny, flexible form factor makes it ideal for embedding into rings, wearables, keychains, and other compact devices where full-sized NFC tags won't fit. The tag provides 144 bytes of read-write memor...

SKU: AF-5890 · MPN: ADA5890

This compact ItsyBitsy board packs an ESP32 PICO module into Adafruit’s small-format microcontroller layout, with dual-core processing, Wi-Fi, Bluetooth® Classic and BLE, 8 MB of Flash and 2 MB of PSRAM.This version swaps the PCB trace antenna for a w.FL external antenna connector, making it usef...

SKU: MP-MMP-0419-(BLACK)

A professional, fully injection-moulded case for the Raspberry Pi Zero. The three-part clip-together construction (top, base, and micro SD card cover) provides solid protection while maintaining full access to all ports. Removable GPIO cut-outs on the top and bottom let you access the header when...