Adafruit
Adafruit USB Type C Vertical Breakout - Downstream Connection
· MPN: ADA5993
The Adafruit USB Type C Vertical Breakout (Downstream Connection) provides easy access to all the pins on a USB-C connector in a vertical orientation, ideal ...
Get notified when back in stock
The Adafruit USB Type C Vertical Breakout (Downstream Connection) provides easy access to all the pins on a USB-C connector in a vertical orientation, ideal for breadboard use and enclosure mounting. Two 5.1K resistors on the CC pins signal the upstream host to provide 5V at up to 1.5A, mimicking classic USB 2.0 downstream behaviour.
The vertical design includes two identical breakout strips on either side so the board sits flat on a breadboard, plus four mounting holes for enclosure attachment. For most projects, simply connect VBUS to your 5V input, GND to ground, and D+/D- as expected.
Key Features
- Vertical USB Type-C Connector – Stands upright for easy breadboard and enclosure use
- Downstream Configuration – Pre-configured with 5.1K CC resistors for device/sink mode
- All Pins Broken Out – Access to VBUS, GND, D+, D-, CC, and SBU pins
- Dual Breakout Strips – Identical pin access on both sides for stable breadboard mounting
- Four Mounting Holes – Secure attachment to enclosures and panels
- USB 2.0 Compatible – Drop-in replacement for older Mini or Micro B connectors
- Up to 1.5A – CC resistor configuration requests up to 1.5A from the host
Ideal For
- Breadboard prototyping with USB-C power and data
- Enclosure-mounted USB-C ports
- Upgrading projects from Micro B or Mini B to USB-C
- USB-C pin analysis and learning
Package Contents
- 1× Adafruit USB Type C Vertical Breakout - Downstream Connection
Resources
Jargon buster
Plain-language definitions for the technical terms used above.
- breakout
- A breakout board carries a small or fine-pitched component and brings its connections out to standard, breadboard- and header-friendly pins. Describing a part as a breakout means it can be wired into a project without soldering directly to the component's tiny contacts.
- GND
- GND is the ground or reference connection (0 V) for a circuit. When connecting two devices together, their grounds must be joined so both agree on what counts as a low or high signal.
- USB 2.0
- USB 2.0 is a widely used wired standard for carrying both data and power between a device and a computer or other compatible host, with data rates up to 480 Mbps. It indicates the kind of port a device uses and that it should work with most modern and many older computers.
- USB Type-C
- USB Type-C is a small, reversible USB connector used for power, data and sometimes video on many modern devices. The connector itself does not guarantee a particular speed or voltage, so check the supported USB version, data rate and whether it carries more than 5V via USB Power Delivery.
- USB-C
- USB-C is a small, reversible USB connector that can carry power, data and, on some devices, video over a single cable. The same connector can range from charging only to high-speed data, so the functions a given port actually supports vary.
- VBUS
- VBUS is a label for a bus or supply voltage. Most commonly it is the +5V power line carried over USB, though on power-monitoring hardware it instead marks the bus-voltage input being measured, so check which sense applies before connecting power or a measurement point.
Find this product in
Brands
Prototyping & Wiring
00001953a
Datasheet · 486.2 KB · Click any page to view full size
Related Tutorials
Free guides on learn.littlebird.com.au
