All Products
AI Overview
Here are the most useful picks for “audio,” grouped by common needs:
Add audio I/O to a microcontroller / SBC
- I2S DAC + built-in headphone/speaker drive: TLV320DAC3100 I2S DAC with Headphone & Speaker Out (I2S, headphone out + mono 4–8Ω speaker support) — $17.10
- Full stereo codec (input + output): WM8960 Audio Codec Breakout with Headers (Qwiic) (I2S ADC + DAC, Qwiic/I2C control) — $34.10
- Raspberry Pi line-out (I2S): Audio DAC SHIM (Line-Out) (slim line-level output for amps/powered speakers) — $31.00
- Teensy audio: Audio Adapter Board for Teensy 4.0 (16-bit / 44.1kHz “CD-quality” audio) — $38.50
Wireless / playback modules
- Bluetooth stereo streaming module: Roving Networks RN-52 Wireless Audio Module (embedded wireless audio streaming) — $51.65
- Bluetooth receiver + USB/TF playback: Bluetooth Audio Receiver and Playback Module (plays MP3/WMA/WAV/FLAC, built-in preamp) — $24.85
Amplification + speakers
- Simple amp module: 386AMP Audio Amplifier Module (Arduino compatible) (LM386-based, 26 dB gain) — $20.95
- Tiny project speaker: Mini Speaker - 1W 8 Ohm (1W, 8Ω, very compact) — $2.30
- Raspberry Pi amplified speaker output: Adafruit I2S 3W Stereo Speaker Bonnet for Raspberry Pi [Mini Kit] (I2S, 3W stereo amp) — $27.95
Microphones (audio input)
- USB plug-and-play mic: Mini USB Microphone (driverless USB mic for PCs/Raspberry Pi) — $13.25
- Digital I2S mic: I2S MEMS Microphone Breakout - ICS-43434 (I2S digital audio) — $12.15
- Analog mic + adjustable gain preamp: Electret Microphone Amplifier - MAX4466 with Adjustable Gain (great for MCU analog input) — $14.45
Cables / connectors
- Standard AUX cable: Stereo 3.5mm Plug/Plug Audio Cable - 6 feet (3.5mm TRS, 6 ft) — $7.30
What kind of audio are you working with?
Showing 81-100 of 100 products
DA7212 I2S Audio Board For Raspberry Pi, Stereo Encoding/Decoding, Onboard Dual Microphones
DA7212 I2S Audio Boardfor Raspberry Pi Supports stereo encoding/decoding and rich audio processing functions Designed for the Raspberry Pi 40-pin GPIO header, this module is fully compatible with Raspberry Pi series boards. It features the high-quality DA7212 stereo DAC, controlled via I2C, with ...
USB-C to 3.5mm Audio Headphone Jack - iPhone Compatible
USB C to 3.5mm Audio Headphone Jack DAC AdapterOverviewThe USB C to 3.5mm Audio Headphone Jack DAC Adapter is your go-to solution for connecting traditional 3.5mm audio devices to modern USB-C devices without a headphone jack. Whether you're listening to music, taking calls, or using your favorit...
3.5mm to 6.5mm Jack Audio Adapter for Guitar Amplifier / Speaker / Headphone
This 3.5mm to 6.5mm audio jack adapter allows you to connect devices with a standard 3.5mm audio plug (such as headphones, phones, tablets, or laptops) to equipment with a 6.35mm (6.5mm) jack socket, including guitar amplifiers, mixers, speakers, and professional audio equipment.The adapter provi...
Audio Expansion Module for Raspberry Pi Pico
Features At A Glance The Pico-Audio is an audio expansion module designed for Raspberry Pi Pico, which incorporates PCM5101A low power stereo decoder, and uses I2S bus for transmitting audio signal. It supports wide range audio sampling rate, allows headphone and speaker signal output at the ...
HDMI to RCA Audio and NTSC or PAL Video Adapter
Do you have a display, television, projector or some other older device that isn't compatible with your HDMI devices? Here's an adapter that will allow you to convert HDMI from your modern computer or game system to NTSC/PAL, for older screens and devices that might not have an HDMI input.Th...
HDMI 4 Pi: 7 Display Audio 1024x600 w/Touchscreen
This 7″ display kit features a 1024×600 resolution TFT panel with a resistive touchscreen overlay and HDMI stereo audio output. The included driver board accepts HDMI, VGA, and composite (NTSC/PAL) video inputs, making it compatible with Raspberry Pi, BeagleBone, and any device with standard vide...
HDMI 4 Pi: 7 Display Audio 1024x600 - HDMI/VGA/NTSC/PAL
Yes, this is a 7" TFT display with 1024x600 resolution with audio-over-HDMI capability! We tried to get the best medium-size display that would be good for embedded computing usage and at a good price. We include a driver board with HDMI, VGA and Composite inputs as stereo 4 ohm at ...
Audio Adapter Board for Teensy 3.0 - 3.2, 3.5 and 3.6
This audio adapter lets you easily add high quality 16 bit, 44.1 kHz sample rate (CD quality) audio to your projects with a Teensy 3.2, 3.5 or 3.6. It supports stereo headphone and stereo line-level output, and also stereo line-level input or mono microphone input.The audio chip connects to Te...
Stereo 2.1W Class D Audio Amplifier - TPA2012
This incredibly small stereo amplifier is surprisingly powerful - able to deliver 2 x 2.1W channels into 4 ohm impedance speakers (@ 10% THD). Inside the miniature chip is a class D controller, able to run from 2.7V-5.5VDC. Since the amp is a class D, it's incredibly efficient (89% efficient when...
Arduino MKR ZERO (I2S bus SD for sound, music digital audio data)
The Arduino MKR Zero brings 32-bit power to the compact MKR form factor, with the standout feature of an onboard SD card connector with dedicated SPI interface for playing music and audio files directly — no extra hardware needed. It also supports the I2S (Inter-IC Sound) bus for connecting digit...
Stereo 3.7W Class D Audio Amplifier - MAX98306
This incredibly small stereo amplifier is surprisingly powerful - able to deliver 2 x 3.7W channels into 3 ohm impedance speakers. Inside the miniature chip is a class D controller, able to run from 2.7V-5.5VDC. Since the amp is a class D, its incredibly efficient (over 90% efficient when driving...
Circuit Playground TFT Gizmo - Bolt-on Display + Audio Amplifier
The TFT Gizmo adds a vibrant 1.54" colour display and audio output to your Circuit Playground board. It bolts directly onto the back of your Circuit Playground using M3 standoffs that provide both mechanical support and electrical connections — no soldering or breadboarding required. Once attach...
Pirate Audio: Dual Mic for Raspberry Pi
Capture sounds in stereo and store them safely away in your Raspberry Pi with Pirate Audio: Dual Mic. It has a matched pair of I2S microphones, a vibrant high-res colour display, and four tactile control buttons. This Raspberry Pi mini HAT is perfect for recording stereo audio clips at the cli...
Motion Activated Audio Player with Separate PIR
Introducing our innovative Audio Player with PIR Motion Sensor, designed for seamless integration and the automatic triggering of audio alerts by motion detection. Explore the standout features of this versatile device: Flexible Motion Sensing: Features a separate PIR motion sensor, allowing fo...
Motion Activated Audio Player with Two Separate PIR
Introducing our innovative Audio Player with PIR Motion Sensor, designed for seamless integration and the automatic triggering of audio alerts by motion detection. Explore the standout features of this versatile device: Flexible Motion Sensing: Features a separate PIR motion sensor, allowing for...
Recordable Audio Speaker Sound Box Built-in MP3 Player
Experience cutting-edge technology with our innovative sound-enhanced motion sensor device. Here's what sets it apart: Key Features: Advanced Motion Detection: Incorporates a high-quality external PIR motion sensor for precise and reliable motion detection. Immersive Audio: Features a b...
USB Audio Adapter
For better audio quality when playing music, consider using a USB audio card with your Raspberry Pi. This upgrade can greatly enhance sound quality and volume since the on-board audio is produced through a minimally filtered PWM output. While the built-in audio is convenient, a USB audio card can...
Raspberry Pi 5 USB Audio Sound Card Module HAT
The Raspberry Pi 5 lacks a built-in audio output, but we've got you covered! This USB Audio Module is a simple, plug-and-play solution that brings high-quality sound to your projects. Featuring onboard dual speakers, a 3.5mm headphone jack, and a unique top-pin design for easy mounting, this modu...
Nova Micro Development Board – Rockchip RK3308B, 8GB eMMC, Audio Codec, Wireless/PoE Optional
·
Unlock the potential of your next tech project with the innovative Luckfox Nova Micro Development Board. This compact powerhouse is driven by the Rockchip RK3308B chipset, renowned for its performance in smart voice and multimedia applications. With a 64-bit quad-core ARM Cortex-A35 CPU clocking ...
SparkFun Audio Player Breakout - MY1690X-16S - SparkFun Electronics
·
A compact serial-controlled audio player breakout built around the MY1690X-16S decoder. Simply load MP3 or WAV files onto a microSD card, connect to your microcontroller via serial, and play audio with simple commands. The board includes an onboard mono amplifier for driving a small speaker dire...
