All Products

SKU: AF-3502 · MPN: 3502

The Adafruit SHARP Memory Display Breakout features a 1.3" 168×144 monochrome LCD that combines the ultra-low power consumption of e-paper with the fast refresh rates of a traditional LCD. The display shows crisp black pixels on a grey background, giving a pleasant e-reader appearance that's exce...

SKU: AF-3456 · MPN: 3456

This 5×AA battery holder delivers approximately 7.5V from five AA batteries, terminated with a 2.1mm DC barrel plug (centre positive). It provides the ideal voltage for Arduino boards and other development boards with onboard 5V regulators, which typically need 1–2V of headroom above their output...

SKU: AF-3399 · MPN: 3399

For many years, instructors and teachers have asked us to come up with a better way to teach programming and electronics. We have worked on Circuit Playground Express for over a year to come up with a board that is powerful, beautiful, fun, and perfect for teaching Code.org CS Discoveries Circ...

SKU: AF-276 · MPN: 276

This FCC/CE certified and UL-listed switching power supply delivers a clean, regulated 5V DC output at up to 2A (2,000mA) via a standard 5.5×2.1mm DC barrel jack. It accepts 110–240V AC input and is suitable for powering LED strips, motors, and other current-hungry 5V devices. Key Features Out...

SKU: AF-1914 · MPN: 1914

The Raspberry Pi Model B+ is an updated revision of the original Raspberry Pi Model B, featuring improved power supply design, more USB ports, expanded GPIO, and a more convenient microSD card slot — all in the same compact form factor. Powered by the same Broadcom SoC running at 700 MHz with 51...

SKU: SF-CAB-10215

A standard USB 2.0 Type-A to Micro-B cable, 1.8 m (6 ft) in length. Micro USB is the standard connector found on a wide range of development boards, microcontrollers, and electronics accessories. Key Features USB 2.0 Type-A to Micro-B – Standard 5-pin micro USB connector 1.8 m Length – Genero...

SKU: SF-PRT-10512

A snap-in 9V battery holder with a 5.5mm/2.1mm centre-positive barrel jack connector. The battery clicks securely into place, and three mounting holes allow you to attach the holder to an enclosure or chassis. Key Features Snap-In Design – Battery clicks securely into place 5.5mm/2.1mm Barrel...

SKU: AF-480 · MPN: 480

A compact 8-way arcade joystick with a satisfying snap action, reminiscent of classic arcade cabinets. Unlike potentiometer-based analogue joysticks, this model uses four internal microswitches for crisp digital on/off directional input — perfect for retro gaming and menu navigation projects. Ke...

SKU: AF-3216 · MPN: 3216

This kit gives you everything you need to build the shell of a 2-wheel-drive Mobile Platform Robot! You get the metal plates that make up the chassis, two DC drive motors with matching wheels, and a caster ball for balance. You'll fill in the rest with a power supply, microcontroller board, an...

SKU: SF-COM-11409

This 20mm 4-digit 7-segment display in white is a mid-size option — large enough to read from a distance but compact enough to fit in most enclosures. The common-cathode display features four 7-segment digits with one decimal point per digit. Key Features 4-Digit 7-Segment – With decimal point...

SKU: AF-3060 · MPN: 3060

The Adafruit ATWINC1500 WiFi Breakout with uFL Connector adds 802.11b/g/n WiFi connectivity to your Arduino or other microcontroller project over SPI. This version features a uFL antenna connector instead of an onboard antenna, allowing you to use an external antenna for improved range or placeme...

SKU: SF-LCD-00710

A framed 128 × 64 pixel graphical LCD with LED backlight. This STN-type display provides clear, high-contrast graphics and text output using the widely supported KS0108B parallel interface chipset. The module includes negative voltage generation circuitry onboard, simplifying integration. Key Fe...

SKU: AF-2824 · MPN: 2824

An RGBW NeoPixel strip with 30 individually addressable LEDs per metre on a flexible black PCB. Each pixel contains four LED elements — red, green, blue, and a dedicated white — providing 32-bit colour control and superior white output compared to RGB-only strips. Also available at 144 LED/m dens...

SKU: AF-2848 · MPN: 2848

An ultra-high-density RGBW NeoPixel strip with 144 individually addressable LEDs per metre on a flexible black PCB. Each pixel contains four LED elements — red, green, blue, and a dedicated white — providing 32-bit colour control and superior white output compared to RGB-only strips. The dedicat...

SKU: SF-BOK-12019

If you’re interested in interactive toys, smart accessories, or light-up fashions, this book is for you! Sew Electric is a set of hands-on LilyPad Arduino tutorials that bring together craft, electronics, and programming. The book walks you through the process of designing and making a series of ...

SKU: AF-2847 · MPN: 2847

An ultra-high-density RGBW NeoPixel strip with 144 individually addressable LEDs per metre on a flexible white PCB. Each pixel contains four LED elements — red, green, blue, and a dedicated white — providing 32-bit colour control and superior white output compared to RGB-only strips. Also availab...

SKU: AF-2832 · MPN: 2832

An RGBW NeoPixel strip with 30 individually addressable LEDs per metre on a flexible white PCB. Each pixel contains four LED elements — red, green, blue, and a dedicated white — providing 32-bit colour control and superior white output compared to RGB-only strips. Also available with a black PCB ...

SKU: AF-2777 · MPN: 2777

This USB to DC booster cable has an integrated boost converter that steps up 5V USB power to 9V DC, output through a centre-positive 2.1 mm barrel jack. It's a convenient way to power 9V devices from any USB port — whether from a computer, USB wall charger, or battery pack. Rated for 500 mA cont...

SKU: SF-COM-09339

This 35mm concave momentary push button delivers the satisfying tactile click of an arcade button. The screw-in design makes it easy to mount in panels and enclosures, and the included 3-terminal microswitch is rated for over 10 million cycles. Key Features Concave Plunger Design – Classic arc...

SKU: DF-FIT0141

A 6×AA battery holder with a DC 2.1mm power jack that plugs directly into an Arduino's barrel jack input. Creates a 7.2V rechargeable battery pack from NiMH/NiCd cells or a 9V pack from alkaline cells. Features mounting holes for secure installation. Specifications Cell Quantity: 6× AA Output...