All Products

SKU: SF-SEN-15441

The SparkFun Lightning Detector adds lightning detection to your next weather station to make sure you are aware of any potential hazardous weather heading your way. The AS3935 is capable of detecting lightning up to 40km away with an accuracy of 1km to the storm front with a sensitive antenna tu...

SKU: SF-SEN-23880 · MPN: SEN-23880

The SparkFun TMAG5273 Linear 3D Hall-Effect Sensor is a low-power, high-precision magnetic field sensor that detects the presence, strength, and direction of magnetic fields in three dimensions. Built on a standard 25.4 × 25.4 mm (1 × 1 in) Qwiic breakout, it communicates over I²C with no solderi...

SKU: SF-SEN-13582

The SparkFun Line Follower Array is a long board consisting of eight IR sensors that have been configured to read as digital bits! We have designed the SparkFun Line Follower Arrays to follow a dark line of about ¾ inch width or smaller (spray paint or electrical tape) on a light background. Each...

SKU: SF-ROB-09453

This version of the QRE1113 breakout board features an easy-to-use analog output, which will vary depending on the amount of IR light reflected back to the sensor. This tiny board is perfect for line sensing applications and can be used in both 3.3V and 5V systems. The board’s QRE1113 IR refle...

SKU: SF-ROB-09454

The SparkFun QRE1113 Line Sensor Breakout (Digital) is a compact IR reflectance sensor board that outputs a digital signal based on surface reflectivity. It uses a capacitor discharge circuit — the faster the 10 nF capacitor discharges, the more reflective the surface. This makes it straightforwa...

SKU: SF-PRT-10217

If you need to charge LiPo batteries, this simple charger will do just that, and do it fast! The SparkFun LiPo Charger Basic is stripped down of all features and just does one thing well - charge 3.7V LiPo cells at a rate of 500mA. It is designed to charge single-cell Li-Ion or Li-Polymer ba...

SKU: SF-PRT-10401

A simple single-cell LiPo/Li-Ion battery charger based on the MCP73831T charge controller IC. Connect a battery via the JST connector, plug in a Mini-USB cable for power, and the board handles charging automatically with a status LED to indicate progress. Key Features MCP73831T Charge Controll...

SKU: SF-PRT-14411

The SparkFun LiPo Charger/Booster is a compact board that charges a single-cell lithium polymer battery and boosts its output to a regulated 5V at up to 1A. Built around the MCP73831 charge controller and PAM2401 boost converter, it's an economical solution for powering 5V projects from a LiPo ce...

SKU: SF-PRT-15217

The SparkFun LiPo Charger Plus is the souped-up power option in the SparkFun line of single-cell lithium polymer (LiPo) battery chargers. With this iteration, we've changed the input charge connector to USB-C and provided charge rate selection as well as optional thermal protection. Charge, power...

SKU: SF-SEN-13879

The SparkFun Load Cell Amplifier is a small breakout board for the HX711 IC that allows you to easily read load cells to measure weight. By connecting the amplifier to your microcontroller you will be able to read the changes in the resistance of the load cell, and with some calibration you’ll be...

SKU: SF-BOB-13878

The SparkFun Load Sensor Combinator is a bare PCB that combines four load sensors into a standard four-wire Wheatstone bridge configuration. If you open up an electronic bathroom scale, you’ll find a large rat’s nest of wires. The Load Sensor Combinator was created to combine the 12 wires foun...

SKU: SF-BOB-12009

The SparkFun Bi-Directional Logic Level Converter safely translates signals between different voltage levels — stepping 5V down to 3.3V and 3.3V up to 5V on the same channel. It also works with 2.8V and 1.8V devices, making it a versatile bridge between mixed-voltage systems. Each board provides...

SKU: SF-PRT-14765

The SparkFun Single Supply Logic Level Converter is logic level and power supply translator in one small package. This little board breaks out the Texas Instruments TXB0104 4-bit bi-directional voltage-level translator with automatic direction sensing. With this logic level converter you wil...

SKU: SF-WIG-12772

The SparkFun Logomatic v2 is a versatile serial and analogue data logger built around the NXP LPC2148 ARM7 microcontroller. It logs data to a microSD card in FAT32 format and appears as a USB mass storage device, so log files can be downloaded by simply dragging and dropping — no special software...

SKU: SF-WRL-17506

The SparkFun expLoRaBLE Thing Plus is a Feather-footprint development board with the NM180100 system in package (SiP), from Northern Mechatronics. Thanks to the NM180100, as well as the Ambiq Apollo3 microcontroller and the Semtech SX1262 LoRa transceiver, this Thing Plus is a highly integrate...

SKU: SF-DEV-14779

The LumiDrive LED Driver is SparkFun’s foray into all things Python on micro-controllers. With the SparkFun LumiDrive you will be able to control and personalize a whole strand of APA102s directly from the board itself. We’ve broken out a number of analog and digital pins from the on board SAMD21...

SKU: SF-COM-14967

This is the one inch version of the SparkFun LuMini LED Ring, packed with 20 individually addressable LEDs, each capable of producing 16 million colors, it provides you with a lot of color for just about any reason! LuMini is a miniaturized version of our Lumenati LED line but instead of utili...

SKU: SF-COM-14966

The SparkFun LuMini LED Ring (2 Inch) features 40 individually addressable APA102-2020 RGB LEDs in a compact ring form factor. Each LED can produce over 16 million colours, and the miniaturised 2 mm × 2 mm package allows for tight pixel density and a near-continuous ring of colour. The ring is c...

SKU: SF-SEN-22398

The SparkFun BMI270 Micro 6DoF IMU Breakout is a Qwiic-enabled breakout board based on the ultra-low power BMI270 from Bosch. This chip is a highly integrated, low-power IMU optimized for wearables providing precise acceleration, angular rate measurement, and intelligent on-chip motion-triggered ...

SKU: SF-SEN-21336

The SparkFun Micro 6DoF IMU Breakout features the STMicroelectronics LSM6DSV16X — a high-performance, low-power 6-axis IMU with a 3-axis accelerometer and 3-axis gyroscope. Its triple-core architecture processes data on three separate channels (UI, OIS, EIS) with dedicated configuration, processi...