All Products

SKU: AF-6073 · MPN: ADA6073

This snap-in panel mount USB cable is perfect for adding a USB host connection to your project enclosure. On one end, it features a compact USB Type-A connector designed for easy snap-in panel mounting—no screws or drilling required. The other end has a convenient wire pigtail with power, ground,...

SKU: AF-4054

This panel mount cable will allow you to enclose a device that has an HDMI port. Perfect for placing your project in a secure box. Both ends have HDMI connectors, an extension cord if you will.What's special about this, you ask? It's a Snap-In Panel Mount Cable - much easier than a classic panel ...

SKU: AF-6124 · MPN: ADA6124

This custom-designed 3D-printed enclosure is made specifically for the Adafruit bq25185 USB/DC/Solar Charger with 3.3V Buck board. The snap-together design requires no screws or glue — simply press the two halves together for a secure fit that protects your board during use and transport. The en...

SKU: AF-6126 · MPN: ADA6126

Here is a cute and minimal enclosure for your Adafruit bq25185 USB / DC / Solar Charger with 5V Boost Board to keep it safe during use and transport. This case has been custom-designed and 3D printed to accommodate all the connectors. No screws or glue are required; simply snap the board into the...

SKU: AF-6241 · MPN: ADA6241

A custom-designed snap-on enclosure for the Adafruit Feather RP2040 with DVI Output Port. 3D printed using an SLA process in translucent milky white plastic, it provides a clean, protective case with no visible layer lines or surface imperfections. No screws or glue required — simply snap the Fe...

SKU: AF-6057 · MPN: ADA6057

SKU: AF-5998 · MPN: ADA5998

Here is a cute and minimal enclosure for your Pixel Trinkey to keep it safe during use and transport. This case has been custom-designed and 3D printed to accommodate the reset button, 3-pin JST SH port, and the 4 terminal block outputs. No screws or glue are required; simply snap the two pieces ...

SKU: AF-6002 · MPN: ADA6002

Here is a cute and minimal enclosure for your QT Py to keep it safe during use and transport. This case has been custom-designed and 3D printed to accommodate the USB-C connector. No screws or glue are required; simply snap the QT Py into the bottom piece and assemble the frame and top piece.Ther...

SKU: AF-5981 · MPN: ADA5981

Here is a cute and minimal enclosure for your TRRS Trinkey to keep it safe during use and transport. This case has been custom designed and 3D printed to accommodate the reset button and STEMMA QT connector. No screws or glue are required, simply snap the two pieces together over the Trinkey.It's...

SKU: AF-6114 · MPN: ADA6114

A snap-on enclosure designed specifically for the Adafruit Universal USB / DC / Solar Lithium Ion/Polymer Charger (bq24074). This 3D-printed case protects the charger board while providing full access to all ports and connections. Key Features Tool-Free Assembly – Snap-fit design requires no s...

SKU: AF-6252 · MPN: ADA6252

A custom-designed snap-together enclosure for the Raspberry Pi Pico, Pico W, Pico 2, and Pico 2 W. 3D printed using an SLA process in translucent milky white plastic, the case allows the power LED to shine through while providing a smooth, high-quality finish. No screws or glue required — simply...

SKU: AF-6183 · MPN: ADA6183

Here is a cute, minimal snap-on mount for your QT Py to keep it safe during use and transport. It has been custom-designed and 3D printed to accommodate the USB-C connector, along with four M3 mounting holes. No screws or glue are required; simply snap on the QT Py.It's made of translucent milky ...

SKU: LB-00031

A classic SNES-style USB gamepad for playing retro games on your PC, Mac, or Raspberry Pi. Plug it in and use it with your preferred emulation software — including RetroPie — for an authentic retro gaming experience. Key Features Classic SNES Layout – D-pad, A/B/X/Y buttons, L/R shoulder butto...

SKU: LB-LR0363

This SNES-style USB controller brings classic retro gaming controls to your PC, Mac, or Raspberry Pi. Plug it in and use it with your preferred emulation software to play all your favourite retro games with an authentic feel. Key Features Classic SNES Layout – D-pad, A/B/X/Y buttons, L/R shoul...

SKU: EF-EF03419

The snowflake buzzer is a symbol of Christmas day's snow. The snowflake buzzer is just like snow, comes in this Christmas night and play the Christmas music.This picture is just for a design sketch , the product includes only snowflake. The Christmas tree, the micro:bit and Alligator cables (Blac...

SKU: AF-6093 · MPN: ADA6093

A decorative COB (Chip-on-Board) LED shaped like a snowflake, using the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a rigid metal backing and coated in silicone, producing a bright, warm, and uniform glow. The ultra-thin PCB substrate allows light ...

SKU: PJ-SOCKET_14X1

A standard 14-pin DIP IC socket with 0.1" (2.54mm) pin spacing. Use it to mount 14-pin DIP integrated circuits on your PCB or breadboard, allowing easy chip insertion and removal without soldering the IC directly. Key Features 14-Pin DIP – Fits standard 14-pin dual in-line packages 0.1" Spaci...

SKU: AF-5583

These Socket Headers alone are, well, lonely. But pair them with the Raspberry Pi Pico, and you're in business!Socket headers are like the duct tape of electronics. They're great for connecting things, soldering to perf-boards, sockets for wires or break-away header, etc. These par...

SKU: AF-2273

This soft potentiometer is an interesting way to add an adjustable resistor / slide potentiometer to your wearable. You can use it to adjust the brightness of an LED, or as a sensor input to your Flora or Gemma. When the ring slides up and down the ribbon, the resistance from the end of the ribbo...

SKU: SF-SEN-08679

A thin, flexible membrane potentiometer that senses finger or stylus position along a 200 mm strip. Pressing anywhere on the strip varies resistance linearly from 100 Ω to 10 kΩ, providing accurate positional data for user interfaces, sliders, and control inputs. The connector uses 2.54 mm (0.1"...