All Products
AI Overview
Popular hobby servos (PWM, 3‑wire)
- Small, general-purpose ~180° micro servo: Micro servo ($13.45)
- Budget 9g micro servo, 1.6 kgf·cm: 9g micro servo (1.6kg) ($7.30)
- More durable 9g metal gear micro servo, 1.8 kgf·cm: 9g Metal Gear Micro Servo (1.8Kg ) ($10.30)
- Higher torque micro option (metal gear) : Micro Servo - High Powered, High Torque Metal Gear ($25.85)
Continuous rotation servos (spin like a geared motor)
- Compact continuous micro drive: Micro Servo 9g - Continuous ($8.20)
- Micro continuous rotation (FS90R form factor): Micro 360 Degree Continuous Rotation Servo FS90R ($14.30)
- Standard-size continuous rotation: Continuous Rotation Servo [FeeTech FS5103R] ($27.05)
Feedback / special-purpose servos
- Read actual position via extra wire (analog feedback, standard size): Analog Feedback Standard-Size Servo ($33.95)
- Safer for stalls/back-driving (300° clutch servo, 6kg) : DFRobot SER0057 6kg 300° Clutch Servo ($22.10)
Smart serial bus servos (multi-servo robotics, encoder feedback)
- 7.4V, 19.5 kg·cm, 360° magnetic encoder: ST3215 Serial Bus Servo 19.5kg.cm 7.4V 360° Encoder ($44.00)
- 12V, 30 kg·cm, 360° magnetic encoder: DFRobot ST3215 12V Serial Bus Servo - 30kg.cm, 360° Encoder ($48.95)
- Matching controller for ST/SC bus servos: Serial Bus Servo Driver Board, Integrates Servo Power Supply And Control Circuit, Applicable for ST/SC Series Serial Bus Servos ($8.20)
Kits/tools for common servo projects
- Ready-to-run 2‑axis camera mount (includes servos): Mini Pan-Tilt Kit - Assembled with Micro Servos ($41.55)
- Pan/tilt bracket only (add your own servos): Unassembled Mini Pan-Tilt Kit (Without Micro Servos) ($9.95)
- Configure/test REV Smart Robot Servos: REV Robotics SRS Programmer ($65.75)
Showing 61-80 of 100 products
Micro servo
![Standard servo - TowerPro SG-5010 [5010]](/rails/active_storage/representations/redirect/BAh7BkkiC19yYWlscwY6BkVUewdJIglkYXRhBjsAVGkCl5tJIghwdXIGOwBUSSIMYmxvYl9pZAY7AEY=--0ac4900376ead7d832ace48884b932cfd681351b/BAh7BkkiC19yYWlscwY6BkVUewdJIglkYXRhBjsAVHsHOgtmb3JtYXRJIghqcGcGOwBUOhJyZXNpemVfdG9fZml0WwdpApABaQKQAUkiCHB1cgY7AFRJIg52YXJpYXRpb24GOwBG--4cc5678865497cdbcf7b02aee5242eda5f847322/image_2fd23895-29e7-46db-ba94-99770993779a.jpg)
Standard servo - TowerPro SG-5010 [5010]
120:1 Plastic Gearmotor, 90º Output
Robot Gripper - Extra Width
Servo Y extension cable (300mm)
SparkFun Servo Trigger - Continuous Rotation
Servo Y extension cable (500mm)
Wall Adapter Power Supply 7.5VDC 1A (American Standard)
DRS - 0101 HerkuleX Smart Servo
DRS - 0201 HerkuleX Smart Servo
Smart Arduino Digital Servo Shield for Dynamixel AX
Arduino Compatible Motor Servo Controller Module
8-Channel PWM or Servo FeatherWing Add-on For All Feather Boards
DC Motor + Stepper FeatherWing Add-on For All Feather Boards
Servo extension cable 150mm
Servo extension cable 600mm (23.62)
SparkFun Opto-isolator Breakout
Screw Shield V2 for Arduino
Plastic Servo Horn
Metal Servo Horn
Micro servo
Tiny little servo can rotate approximately 180 degrees (90 in each direction), and works just like the standard kinds you're used to but smaller. You can use any servo code, hardware or library to control these servos. Good for beginners who want to make stuff move without building a motor contro...
Standard servo - TowerPro SG-5010 [5010]
This high-torque standard servo can rotate approximately 180 degrees (90 in each direction). You can use any servo code, hardware or library to control these servos. Good for beginners who want to make stuff move without building a motor controller with feedback & gear box. Comes with 3 horns, as...
120:1 Plastic Gearmotor, 90º Output
A 120:1 plastic gearmotor with a 90° output shaft — the output is perpendicular to the motor axis, making it a compact choice for small robot designs where side-mounted wheels or mechanisms are needed. The enclosed gearbox and low-current brushed DC motor run on 3–12V, with a built-in safety clut...
Robot Gripper - Extra Width
This is a 2 DOF robot gripper that can be installed with 2 servos so as to control gripper opening and closing with one servo, and steering gear motion control (or rotation) with the other servo. Velocity range is 0 to 54 mm (0 to 2.13"). Total weight about 45 g. The servo slot fit most...
Servo Y extension cable (300mm)
This 300mm Y-cable is typically used to connect two servos to a single servo port on an RC receiver or servo controller. It has a single female JR connector connected to two male JR connectors, which means it is compatible with almost all of the RC servos.The connectors have gold-flashed conta...
SparkFun Servo Trigger - Continuous Rotation
The SparkFun Continuous Rotation (CR) Servo Trigger lets you control a hobby CR servo motor without any programming. Simply connect a servo and a switch, adjust the three onboard potentiometers, and the board handles everything — when the switch changes state, the servo transitions between two sp...
Servo Y extension cable (500mm)
This 500 mm Y-cable is typically used to connect two servos to a single servo port on an RC receiver or servo controller. It has a single female JR connector connected to two male JR connectors, which means it is compatible with almost all of the RC servos.The connectors have gold-flashed cont...
Wall Adapter Power Supply 7.5VDC 1A (American Standard)
A 7.5 V DC wall adapter power supply with a DC 2.1 mm barrel connector, compatible with the Arduino power jack. The 7.5 V output is well suited for Arduino projects that need more than 5 V but where 12 V may be excessive — ideal for motor or servo applications that require a reliable mid-range vo...
DRS - 0101 HerkuleX Smart Servo
Herkulex DRS-0101 is state of the art modular smart servos incorporating motor, gear reducer, control circutry and communications capability in one single package, which can provide up to 12kg.cm at 7.4v. Equipped with a lot of adapting pieces including Horn, Horn Bolt(BHT 2.6X8), Whe...
DRS - 0201 HerkuleX Smart Servo
Herkulex DRS-0201 is state of the art modular smart servos incorporating motor, gear reducer, control circutry and communications capability in one single package. Through metal brush coreless DC motor, it can provide torque up to 24kg.cm at 7.4v. Equipped with a lot of adapting piece...
Smart Arduino Digital Servo Shield for Dynamixel AX
Some day,a guy want to make a robotic dog as a gift to his little son.He brought some digital servos, a microcontroller,Lipo batterys...Then he found it hard to drive these smart servos with Arduino processor! So we developed a driver board that can easily & quickly drive the digital servo...
Arduino Compatible Motor Servo Controller Module
This versatile motor and servo controller shield for Arduino drives up to 4 bidirectional DC motors or 2 stepper motors, plus 2 servos — all from a single board. The 4 onboard H-bridges provide 0.6A per channel (1.2A peak) with thermal protection, and the dedicated servo ports use the Arduino's h...
8-Channel PWM or Servo FeatherWing Add-on For All Feather Boards
The 8-Channel PWM or Servo FeatherWing adds 8 channels of 12-bit PWM output to any Adafruit Feather board via I2C. It uses an onboard PWM driver with a built-in clock, so it runs independently without tying up your microcontroller — unlike the TLC5940 family, no continuous signal is needed. The ...
DC Motor + Stepper FeatherWing Add-on For All Feather Boards
A Feather board without ambition is a Feather board without FeatherWings! This is the DC Motor + Stepper FeatherWing which will let you use 2 x bi-polar stepper motors or 4 x brushed DC motors (or 1 stepper and 2 DC motors). Using our Feather Stacking Headers or Feather Fem...
Servo extension cable 150mm
A 150mm servo extension cable for reaching servos mounted further from the controller than the servo's built-in lead allows. Male connector plugs into the controller, female connector mates with the servo. Also works as a standard 0.1" jumper cable for general prototyping. Specifications Lengt...
Servo extension cable 600mm (23.62)
This is a 600mm (23.62") servo extension cable. This comes in very handy when your servo is further away from the controller than the wire on the servo allows. Male connector on one end goes to controller, female connector mates with servo. Fits all Hitec, Futaba, JR, Multiplex, and Airtronics...
SparkFun Opto-isolator Breakout
This is a board designed for opto-isolation. This board is helpful for connecting digital systems (like a 5V microcontroller) to a high-voltage or noisy system. This board electrically isolates a controller from the high-power system by use of an opto-isolator IC. This IC has two LEDs and two pho...
Screw Shield V2 for Arduino
The DFRobot Arduino-Compatible Screw Shield is a terminal expansion board that allows you to screw in jumper wires to a screw terminal for a much stronger and secure connection for your I/O and power pins. Feel secure with this arduino-compatible screw shield. The screw shield v2 from DFRobot...
Plastic Servo Horn
This is a high quality plastic servo horn. It fits DF series servos. Made specifically for DF series servos. SPECIFICATIONS Outside diameter: 20mm(0.79") Center hole diameter: 3mm(0.12") Mounting holes: 1.5mm(0.06") DOCUMENTS Dimensions SHIPPING...
Metal Servo Horn
This is a high quality metal servo horn. It fits Hitec standard servos, DF series servos and the Uptech CDS 5500 Servo. SPECIFICATIONS Outside diameter: 20mm(0.79") Center hole diameter: 3mm(0.12") Mounting holes: M3 Weight: 2g DOCUMENTS Dimensions ...
