All Products
Showing 61-80 of 100 products
Gravity LED Switch Module - White
·
This compact illuminated push-button module combines a tactile switch with a built-in white LED indicator, making it handy for interactive electronics, prototypes and embedded control panels.The switch outputs a digital HIGH/LOW signal and runs from +3.3-5V, so it suits common development boards ...
Gravity: Laser PM2.5 Air Quality Sensor For Arduino
The Gravity Laser PM2.5 Air Quality Sensor uses laser scattering to measure suspended particulate matter concentrations in the air. It detects particles from 0.3 to 10 µm in diameter and outputs digital concentration data via a serial interface — ideal for building air quality monitors, weather s...
Gravity LED Button for Arduino and micro:bit - Red
·
This compact illuminated push-button module is designed for interactive electronics and quick prototyping. A transparent cap sits over an internal red LED, giving instant visual feedback when the button is pressed.The module provides a simple digital output for microcontroller input detection: wh...
Gravity: Digital LED String Lights (Warm White) For Arduino - DFrobot
A string of 40 warm white LEDs on a 4-metre wire, controlled via a digital signal through the DFRobot Gravity interface. Create fading effects with PWM or power at a fixed voltage for steady illumination. Ideal for decorative lighting, ambient displays, and creative electronics projects. Key Fea...
DFRobot Gravity LED Self-Locking Switch - Yellow
·
This illuminated latching push button combines a tactile switch with a built-in yellow indicator LED, making it easy to add clear on/off control to interactive electronics and educational prototypes.When the button is pressed down, the module self-locks, outputs High and lights the LED. Pressing ...
Gravity: N20 Micro Metal Gear Motor with Integrated Drive (3V-6V, 1:150/133RPM)
·
The Gravity N20 is a compact all-metal gear motor with an integrated drive chip that simplifies motor control to a single PWM signal. Operating on 3–6 V, it uses a PPM servo-style control method — forward, stop, and reverse are set by pulse width — eliminating the need for a separate motor driver...
Gravity: Non-contact Arduino Water / Liquid Level Sensor
A non-contact liquid level sensor that detects the presence of liquid through a container wall — no direct contact with the liquid required. Using advanced signal processing via the XKC-Y25-T12V chip, it works through most non-metallic containers including plastic, glass, and ceramic. This makes...
Gravity IO Expansion Shield for LattePanda
The Gravity IO Expansion Shield breaks out all GPIO pins from the LattePanda into Gravity-compatible 3-pin colour-coded connectors, providing plug-and-play access to hundreds of Gravity sensors and modules. Each pin includes VCC and GND, eliminating the need for separate power wiring. The shield...
Gravity: Intermediate(advanced) Kit for Arduino
The DFRobot Gravity Intermediate Kit for Arduino takes you beyond the basics with a comprehensive set of sensors, modules, and an Arduino-compatible board. Starting with simple LED projects and progressing to more complex builds like a mini electronic drum kit, sound-activated LED, and digital di...
Hackster and DFRobot IoT Starter EEDU Kit (ESP32)
An all-in-one IoT starter kit built around the FireBeetle 2 ESP32-E, designed by Hackster and DFRobot for learning IoT development with Arduino. The kit includes sensors, actuators, an audio player with speaker, and an I/O shield — everything needed to build connected projects right out of the bo...
DFRobot DFRduino UNO R3 Kit with IO Expansion Shield & USB Cable
·
This compact DFRobot microcontroller bundle is designed for learning, prototyping and physical computing projects. The DFRduino Uno V3.0 is fully compatible with Arduino UNO R3 and the Arduino IDE open-source development environment, which uses the Processing / Wiring language.The board is based ...
Romeo BLE - Arduino Robot Control Board with Bluetooth 4.0
The Romeo BLE is an all-in-one Arduino-compatible robot control board from DFRobot with integrated Bluetooth 4.0. It combines an ATmega328P microcontroller, a dual-channel DC motor driver (2 A max), and a TI CC2540 BLE chip in a single board — letting you build and wirelessly control robots witho...
Gravity LED Self-Locking Switch - Red
·
This illuminated pushbutton module is a simple self-locking switch with a built-in red LED for clear visual feedback. Press it once and the module outputs High while the LED turns on; press it again and the output goes Low while the LED turns off.It is designed for easy use in Arduino, micro:bit ...
Gravity: Flexible Piezo Film Vibration Sensor
This is an Arduino compatible piezo film vibration sensor. It is made up of flexible piezo film and converter board. The sensor is able to detect vibration, flexibility, impact and touch. The film is a flexible component comprising a 28 µm thick piezoelectric PVDF polymer film with screen-printe...
Gravity: Digital Push Button (Green)
The DFRobot Gravity Digital Push Button (Green) is a simple momentary switch with an on-board LED indicator, designed for the Gravity interface system. It features an immersion gold PCB surface, a bright green cap, and a standard 3-pin digital connector for plug-and-play use with Arduino and othe...
Crash sensor (Left)
A compact crash sensor (left-side variant) based on a miniature snap-action micro switch with roller lever. Designed for Arduino and compatible microcontrollers, this sensor module includes an onboard pull-up resistor and status indicator LED for easy testing and integration. The roller lever des...
Gravity: Arduino LPG Gas Sensor (MQ4)
INTRODUCTION This is an Arduino CH4 gas sensor. It uses MQ4 probe which is able to detect nature gas, CH4. It is less sensitivity in detecting alcohol, cooking fumes, and cigarette smoke. The sensitivity can be adjusted by the potentiometer. The output is ...
Gravity: SHT31-F Digital Temperature and Humidity Sensor
Gravity: SHT31-F digital temperature and humidity sensor is based upon the Sensirion SHT31-F sensor IC. Thanks to Sensirion’s CMOSens® technology, highly integrated capacitive humidity sensing components and band-gap temperature sensing components, the SHT31-F offers high reliability and long-ter...
IO Expansion HAT for Raspberry Pi 4B/3B+
An I/O expansion HAT for Raspberry Pi 4B and 3B+ that breaks out all GPIO pins into clearly labelled digital, analogue, PWM, I2C, UART, SPI, and I2S interfaces. The board is compatible with DFRobot Gravity series sensors and modules, allowing plug-and-play connections without complex wiring. The...
MindPlus Coding Kit for Arduino
MindPlus Coding Kit for Arduino is a set of tools for programming learning. As its compatibility for Mind+, a graphical coding software for starters, and Arduino IDE, this kit is well applicable to students from the lower grade to the higher grade. It comes with an Arduino Uno R3 mainboard and a ...
