All Products
Showing 61-80 of 100 products
Badgeware Badger - Badge + STEM Kit
Badger 2350 is an all-in-one wearable badge built around a fast-updating 2.7" four-level greyscale electronic paper display. It arrives fully assembled in a sturdy polycarbonate case with a built-in rechargeable battery, so it can be worn on the included lanyard or propped up on a desk for signag...
SAM-M8Q GNSS Receiver (Qwiic)
·
Built around the u-blox SAM-M8Q module, this compact GNSS receiver is a straightforward way to add location tracking to a project. Plug in USB-C for power and configuration, or use the Qwiic connectors for solder-free I2C integration with compatible boards.The board includes an integrated smart a...
Thing Plus RP2350 Wireless Development Board
·
Build connected sensor nodes, data loggers and battery-powered IoT projects around Raspberry Pi’s RP2350 microcontroller. This Thing Plus board adds wireless connectivity, extra memory and the familiar Feather-compatible footprint in a compact development platform.The RP2350 can run two selected ...
0.100" (2.54 mm) Female Header: 2x3-Pin, Straight
A 2×3-pin (6-pin) female header with standard 0.1" (2.54mm) spacing. This compact dual-row header is commonly used for ISP programming connections, small sensor breakouts, and custom cable assemblies. The 2×3 configuration matches the standard AVR ISP programming header pinout, making it essenti...
Arduino CAN BUS Shield
The Arduino CAN BUS Shield V2 brings Controller Area Network (CAN bus) communication to your Arduino. Built around the MCP2515 CAN controller, it supports both standard and extended frames for transmitting and receiving data over the CAN bus — the same protocol used in automotive, industrial, and...
SparkFun USB LiPoly Charger - Single Cell
The SparkFun USB LiPoly Charger is a single-cell Li-Ion/Li-Polymer battery charging board based on the MCP73831T. It charges 3.7V LiPo cells at a selectable rate of 500 mA or 100 mA via a solder jumper, with power input from either USB or a barrel jack connector. The board includes a SYS OUT JST...
Teensy 3.5
The Teensy 3.5 is a compact, powerful USB development board built around a 32-bit ARM Cortex-M4 processor running at 120 MHz with a hardware floating-point unit. With 512 KB of flash, 256 KB of RAM, and 64 digital I/O pins (all 5V tolerant), it packs serious capability into a small form factor. ...
SparkFun Spectral Sensor Breakout - AS7263 NIR (Qwiic)
The SparkFun AS7263 breakout brings near-infrared (NIR) spectroscopy to your microcontroller projects. The sensor measures six discrete NIR wavelengths, allowing you to characterise how different materials absorb and reflect light — useful for material identification, agricultural sensing, and co...
USB/TTL Raspberry Pi GPS Tracker
The USB/TTL Raspberry Pi GPS Tracker is a compact GPS location module built around the L80-39 chip. With 66 search channels and 22 simultaneous tracking channels, it delivers fast satellite acquisition and reliable positioning accuracy down to 2.5m. Featuring both USB and TTL interfaces, this mo...
Octopus Touch PAD Sensor
The Octopus Touch PAD Sensor is a capacitive touch module based on the TTP223-BA6 IC. It detects touch through dielectric materials such as glass, ceramic, and plastic, making it suitable for touch-through-panel applications. The module connects via a 3-pin Octopus connector for plug-and-play use...
Plasma 2040
Swathe everything in rainbows with this all-in-one, USB-C powered controller for WS2812/Neopixel and APA102/Dotstar addressable LED strip. Plasma 2040 is a RP2040-based driver board for addressable LED strip (also known as magical rainbows by the metre). It's designed to make rigging up bits ...
SparkFun Pro Micro - RP2040
The SparkFun Pro Micro RP2040 is a low-cost, high performance board with flexible digital interfaces featuring the Raspberry Pi Foundation's RP2040 microcontroller. Besides the good 'ol Pro Micro footprint, the board also includes a WS2812B addressable LED, boot button, reset button, Qwiic connec...
ESP32-S2-WROVER-I Module with uFL - 4 MB flash and 2 MB PSRAM
·
The ESP8266 started a small revolution by bringing WiFi to a small and cheap package that also had enough processing power and enough pins to get small things done. Then the ESP32 came out with tons of pins, Bluetooth support, and dual 240 MHz cores. Now get ready to take your IoT designs to the ...
SparkFun RP2040 mikroBUS Development Board
The SparkFun RP2040 mikroBUS Development Board is a low-cost, high performance platform with flexible digital interfaces featuring the Raspberry Pi Foundation's RP2040 microcontroller. Besides the Thing Plus or Feather PTH pin layout, the board also includes a microSD card slot, 16MB (128Mbit) fl...
Badger 2040 + accessories
A hackable, programmable badge with E Ink® display, powered by Raspberry Pi RP2040. In honour of Raspberry Pi's 10th birthday, we've fused a RP2040 microcontroller with an EPD display to make a stylishly monochrome, maker friendly, e-paper badge(r) to attach to your person, your office door...
Pimoroni Servo 2040 - RP2040 18 Channel Servo Controller
·
Build the hexapod/robot arm/other articulated contraption of your dreams with this all-in-one RP2040 powered servo controller with current measurement, sensor headers, and RGB LEDs. Servo 2040 is a standalone servo controller for making things with lots of moving parts. It has pre-soldered pi...
Motor 2040 - Quad Motor Controller
A compact 4 channel motor+encoder controller, powered by RP2040. It has RGB and per-motor indicator LEDs plus built in voltage and current sensing. Motor 2040 is a standalone motor controller for driving motors with encoders attached. Encoder motors can provide feedback to the controller, enabli...
Tufty 2040 + Accessory Kit
A hackable, programmable badge with 2.4" (320 x 240) TFT LCD colour display, powered by Raspberry Pi RP2040. We've had a lot of requests for a LCD version of Badger 2040 so tada - meet our pal Tufty. In a nutshell, we've combined a RP2040 microcontroller with a nice, crisp LCD screen to make a s...
SparkFun AzureWave Thing Plus - AW-CU488
The SparkFun AzureWave Thing Plus is a Feather form-factor development board equipped with the AW-CU488. The module features the Realtek RTL8721DM integrated single-chip low-power dual-band (2.4GHz and 5GHz) wireless LAN communication controller. It also consists of a dual processor core: Rea...
Enviro Indoor (Pico W Aboard) with Accessory Kit
A wireless environmental monitoring board to keep track of inside conditions in your home, office or other habitat. Onboard sensors can measure temperature, humidity, pressure, gas and light. The top of the range BME688 sensor on Enviro Indoor can measure temperature/humidity/pressure with a...
