All Products

SKU: DF-FIT0897 · MPN: FIT0897

This pack includes ten 30 cm Gravity analogue sensor cables, each with a 3-pin PH2.0 plug on one end and DuPont male connectors on the other.The cables are compatible with breadboard and DuPont wire spacing, making them handy for connecting DFRobot analogue sensors to an IO Expansion Shield or IO...

SKU: DF-DFR1229 · MPN: DFR1229

This GP8600 module is a high-precision digital-to-analogue converter for connecting logic-level microcontrollers to industrial-style analogue control inputs. It accepts I2C or PWM signals and converts them for applications such as 0-5V, 0-10V and 4-20mA control.It is designed for automation and c...

SKU: SF-SPX-24706 · MPN: SPX-24706

This connector assembly is a replacement part for repairing a SparkFun RTK Facet or RTK Facet L-Band. It is intended for users who are comfortable opening and servicing their device.The assembly is supplied for repair work rather than general prototyping or GNSS development. If you need a high-pr...

SKU: SF-COM-16916 · MPN: COM-16916

Add letters, numbers and symbols to your project with red fourteen-segment digits that are much more flexible than a basic seven-segment display. This Qwiic display connects over I2C, so you can plug it in without soldering, without working out SDA and SCL by hand, and without adding separate vol...

SKU: SF-KIT-16327 · MPN: KIT-16327

Build a movable camera system around a Raspberry Pi Zero W with this kit. It brings together the Zero W, Raspberry Pi Camera Module V2 and SparkFun Pi Servo pHAT to create a pan/tilt camera for IoT projects.Use it for homemade motion-activated security systems, webcam interfaces for streaming, or...

SKU: SF-KIT-24441 · MPN: KIT-24441

Start prototyping low-power cellular IoT projects with a kit built around Digi XBee Cellular and the Qwiic Connect System. It brings together the core board, cellular module, sensor, SIM, antennas and cables needed to begin collecting data beyond normal Wi-Fi range.The included SparkFun Digi XBee...

SKU: SF-DEV-27924 · MPN: DEV-27924

Control a project with muscle activity instead of buttons, levers or joysticks. The MyoWare® 2.0 Muscle Sensor is an all-in-one surface electromyography (sEMG) sensor that detects the electrical signals generated when a muscle flexes, then outputs an analogue signal representing the strength of t...

SKU: SF-COM-29200 · MPN: COM-29200

This compact connector is a 16-pin, surface-mount ZIF FPC connector with a 0.5mm pitch, suited to connecting compatible flat flexible cables to your PCB.It uses a right-angle layout with contacts on both the top and bottom, helping support dual-contact cable arrangements in tight designs. The fli...

SKU: SF-PRT-15095 · MPN: PRT-15095

This 40-pin surface-mount FPC (Flat Printed Circuit) connector is a compact board-level connector for flexible flat cables and display tails. Its contacts are arranged so the cable can be inserted with the contacts facing either up or down, giving you more flexibility when laying out or assemblin...

SKU: AF-4422 · MPN: ADA4422

This 220 piece connector assortment gives your workstation a handy supply of 2.0mm pitch JST-PH compatible plugs, sockets and crimp terminals. It is a useful kit for prototyping, repairs and making up custom leads for common maker electronics.JST-PH style connectors are widely used in electronics...

SKU: DF-TEL0168 · MPN: TEL0168

Turn regular 3.3V sensors into wireless BLE sensor nodes with this 5 pack of Fermion BLE Sensor Beacons from DFRobot. Each beacon broadcasts data using Bluetooth Low Energy, so nearby BLE-capable devices such as smartphones and ESP32 boards can scan and receive the data without pairing.The Fermio...

SKU: DF-FIT1013 · MPN: FIT1013

This expansion cable kit is made for connecting Gravity-style modules directly to the UNIHIKER M10 and UNIHIKER K10 mainboards. Its plug-and-play design helps you hook up sensors, actuators and displays without needing extra expansion shields.The kit includes two 20cm PH2.0-3P male-to-male cables...

SKU: DF-MBT0021-EN-5 · MPN: MBT0021-EN-5

This classroom-ready bundle brings together the Maqueen Plus V2 AA robot platform, Maqueen Mechanic attachments, micro:bit V2 boards and a wireless gamepad for hands-on STEAM robotics lessons and projects.The Maqueen Plus V2 has a larger body, more expansion ports, built-in line tracking, lightin...

SKU: DF-DFR0992-EN-1 · MPN: DFR0992-EN-1

This UNIHIKER bundle pairs the K10 and M10 to support a progression from first AI experiments through to more advanced IoT and Python projects. The K10 is aimed at entry-level AI learning with pre-installed vision models and TinyML capability, while the M10 adds more processing power, Debian, and...

SKU: DF-EDU0208 · MPN: EDU0208

This hands-on STEM kit helps students build a smart drip irrigation model while learning about automated agriculture, water conservation and climate action. It combines environmental sensors with a micro:bit or UNIHIKER K10 microcontroller to monitor soil moisture and water level, then control a ...

SKU: DF-KIT0234 · MPN: KIT0234

Introduction The WIAnode Sensor Kit is a comprehensive hardware collection designed to bridge the physical world and digital creative environments. Operating as a sensory extension for wireless data interaction nodes, this kit enables instant, virtual-real interaction without the friction of comp...

SKU: SF-KIT-23091 · MPN: KIT-23091

Setting up a Pi Zero can mean tracking down a few specific cables and a suitable power supply, so this kit bundles the essentials in one package. It is centred around the compact Raspberry Pi Zero W, a small single-board computer suited to embedded builds and Internet of Things projects.The Pi Ze...

SKU: SF-COM-16919 · MPN: COM-16919

Add bright pink letters, numbers and symbols to your project with this Qwiic alphanumeric display. Its fourteen-segment digits give you far more flexibility than a standard seven-segment display, making it useful for status readouts, short labels, timers and compact user interfaces.The board uses...

SKU: AF-6475 · MPN: ADA6475

Make an internet-connected RGB matrix display without the usual wiring fuss. This board plugs straight into the back of a compatible HUB75 RGB matrix, giving you an easy way to build colourful signs, clocks, status panels and data dashboards with CircuitPython or Arduino.This version uses a u.FL ...

SKU: AF-6432 · MPN: ADA6432

This breakout is built around TI's ADS122C04, a high-resolution analogue-to-digital converter that lets you measure very small single-ended or differential signals over I2C. It offers 24-bit conversion with data rates up to 2 kSPS on one channel, making it a strong fit for scientific, industrial,...