All Products
AI Overview
Here are the most useful picks for “audio,” grouped by common needs:
Add audio I/O to a microcontroller / SBC
- I2S DAC + built-in headphone/speaker drive: TLV320DAC3100 I2S DAC with Headphone & Speaker Out (I2S, headphone out + mono 4–8Ω speaker support) — $17.10
- Full stereo codec (input + output): WM8960 Audio Codec Breakout with Headers (Qwiic) (I2S ADC + DAC, Qwiic/I2C control) — $34.10
- Raspberry Pi line-out (I2S): Audio DAC SHIM (Line-Out) (slim line-level output for amps/powered speakers) — $31.00
- Teensy audio: Audio Adapter Board for Teensy 4.0 (16-bit / 44.1kHz “CD-quality” audio) — $38.50
Wireless / playback modules
- Bluetooth stereo streaming module: Roving Networks RN-52 Wireless Audio Module (embedded wireless audio streaming) — $51.65
- Bluetooth receiver + USB/TF playback: Bluetooth Audio Receiver and Playback Module (plays MP3/WMA/WAV/FLAC, built-in preamp) — $24.85
Amplification + speakers
- Simple amp module: 386AMP Audio Amplifier Module (Arduino compatible) (LM386-based, 26 dB gain) — $20.95
- Tiny project speaker: Mini Speaker - 1W 8 Ohm (1W, 8Ω, very compact) — $2.30
- Raspberry Pi amplified speaker output: Adafruit I2S 3W Stereo Speaker Bonnet for Raspberry Pi [Mini Kit] (I2S, 3W stereo amp) — $27.95
Microphones (audio input)
- USB plug-and-play mic: Mini USB Microphone (driverless USB mic for PCs/Raspberry Pi) — $13.25
- Digital I2S mic: I2S MEMS Microphone Breakout - ICS-43434 (I2S digital audio) — $12.15
- Analog mic + adjustable gain preamp: Electret Microphone Amplifier - MAX4466 with Adjustable Gain (great for MCU analog input) — $14.45
Cables / connectors
- Standard AUX cable: Stereo 3.5mm Plug/Plug Audio Cable - 6 feet (3.5mm TRS, 6 ft) — $7.30
What kind of audio are you working with?
Showing 61-80 of 100 products
Pirate Audio: Line-out for Raspberry Pi
Plug Pirate Audio Line-out for Raspberry Pi into your hi-fi amp or powered speakers, then sit back, relax, and soak in the rich, digital audio. It has a high-quality I2S DAC, high-res colour display, and playback control buttons. This board is perfect for upg...
Pirate Audio: Headphone Amp for Raspberry Pi
The ultimate hackable headphone amp for your desk! Pirate Audio Headphone Amp for Raspberry Pi has an I2S DAC, headphone amplifier, high-res display, and playback control buttons.Build your own home-brew iPod Nano with Pirate Audio Headphone Amp! It's an all-in-one s...
Pirate Audio: 3W Stereo Amp for Raspberry Pi
Bring an old radio or set of speakers into the 21st century with Pirate Audio 3W Stereo Amp for Raspberry Pi! Get punchy digital audio through the push-fit terminals and control your music with the built-in colour LCD and playback control buttons.The push-fit connectors on Pir...
ESP32-A1S Wi-Fi+BT Audio Development Kit
The ESP32-A1S Audio Development Kit is a feature-rich audio development board built around the ESP32-A1S module. It includes a dual-core Xtensa LX6 processor, Wi-Fi, Bluetooth 4.2, and a complete set of audio interfaces — making it an all-in-one platform for building smart speakers, voice assista...
Bluetooth 4.2 Audio Receiver Board-with an Amplifier (2x5W)
This is a small size and cost-effective Bluetooth 4.2 Audio Receiver module with dual 5W power amplifier circuits. It supports auto-reconnect and can be powered by micro USB or 3.7V lithium battery. The module can be turned into a stereo Bluetooth speaker when connected with two speakers. Also, y...
Bluetooth Audio Receiver Decoding Player
This is a bluetooth audio receiver module with usb and TF card decoding. Usually it’s can be used as a mp3 player, just a TF card and DC 5V power supply. It has five buttons for you to change mode or achieve other audio control like volume adjustment. It has two modes : music mode and bluetooth d...
Audio BLE/SPP Pass-through Module - Bluetooth 5.0
INTRODUCTIONThis Bluetooth module features Bluetooth/U-disk/TF-card playback, and Bluetooth call function, supporting simple and clear serial port control function, BLE pass-through, and SPP pass-through functions. The highlight of this product is the dual-mode Bluetooth, which also means that it...
Evaluation Board for Audio BLE/SPP Pass-through Module - Bluetooth 5.0
An evaluation board for a dual-mode Bluetooth 5.0 module that handles both wireless audio and serial data pass-through simultaneously. It can play audio from U-disk or TF card, stream audio over Bluetooth, handle Bluetooth call control, and run BLE or SPP data pass-through — all at the same time,...
3W Mini Audio Stereo Amplifier (W2.54)
This compact stereo amplifier module from DFRobot features a 2.54mm pin pitch for easy breadboard and embedded use. It delivers 3W per channel with left and right stereo output, and includes a shutdown (SHDN) pin for switching between working and sleep modes. By default, the module is in working...
M38 Wireless Bluetooth MP3 Audio Receiver board BLT 4.2 Mp3
A compact Bluetooth 4.2 audio receiver module (MH-M18) that streams two-channel stereo audio wirelessly from your phone, tablet, or other Bluetooth device. Once paired, it delivers lossless audio playback with a connection range of up to 20 metres in open environments. The module supports button...
Audio Stereo Decoder Module Board 3.3V - 5V
HS1891 DAC Module CJMCU-1334 UDA1334A I2S DAC Audio Stereo Decoder Module Board 3.3V - 5V Feature: This fully-featured UDA1334A I2S Stereo DAC breakout is a perfect match for any I2S-output audio interface. 3.3V - 5V logic levels and can process multiple different formats by setting tw...
Adafruit STEMMA Speaker - Plug and Play Audio Amplifier
·
The Adafruit STEMMA Speaker combines a Class D audio amplifier with a 1W 8 Ω speaker in one slim, portable package. Connect ground, 3–5V power, and an audio signal via the JST-PH STEMMA connector or the alligator/sew-pads — no AC coupling needed, the board handles that for you. Sound quality is ...
Bluetooth 5.0 Audio Receiver Board
This is a compact and cost-effective Bluetooth 5.0 audio receiver module that supports automatic reconnect function. It can be powered by a micro USB or 3.7V lithium battery. You can easily convert your old speakers into wireless Bluetooth speakers with this module. If you short circuit the So...
DAC Audio Decoder Board for Raspberry Pi 3B+/ 4B
Related Product: Raspberry Pi Power Filter BoardThis Raspberry Pi DAC Audio Decoder Board supports I2S/DSD/coaxial input, analog/coaxial/optical/I2S output, 384K/32Bit decoding function and unique DSD clock de-jitter.The audio decoder board supports decoding of I2S and DSD digital audio signals o...
Bluetooth 5.0 Audio Receiver Board-Controllable Volume
A compact Bluetooth 5.0 audio receiver board that turns any wired speaker into a wireless one. Simply connect power (3.7–24V) and wire up your speaker — pair it with your phone and start streaming music wirelessly. The board features auto-reconnect, so it automatically pairs with the last connect...
Round Panel Mount Stereo Audio Extension Cable - 1/8" / 3.5mm
·
A round panel-mount 3.5 mm stereo audio extension cable that installs with a simple drilled hole — no custom cutouts or filing required. The approximately 30 mm diameter mounting flange fits holes made with a standard hole saw or drill bit, and a threaded plastic nut secures it to panels up to ~1...
Audio Cable TRS - 1m
A 1-metre TRS (Tip, Ring, Sleeve) audio cable with standard 3.5mm plugs on both ends. Suitable for connecting audio devices, development boards with 3.5mm jacks, and other three-conductor applications. Specifications Connector – 3.5mm TRS (male) on both ends Conductors – 3 (Tip, Ring, Sleeve)...
Adafruit RP2040 Prop-Maker Feather with I2S Audio Amplifier
The Adafruit RP2040 Prop-Maker Feather is an all-in-one board designed for building props, cosplay pieces, lightsabers, animatronics, and interactive toys. It combines the RP2040 microcontroller with a prop-making toolkit — I2S audio amplifier, NeoPixel driver with level shifting, accelerometer, ...
WVR Audio Development Board
WVR is a next-generation sample player powered by an ESP32. WVR features 8GB of memory and an advanced Web GUI where users upload audio and manage configuration and firmware. WVR is Arduino compatible and open-source, and fits on a common breadboard, with room to access all the pins.WVR offers us...
Adafruit STEMMA Audio Amp - Mono 2.5W Class D - PAM8302
The Adafruit STEMMA Audio Amp is a compact mono Class D amplifier based on the PAM8302 chip, delivering up to 2.5W into 4 Ω speakers from a 2.0–5.5V DC supply. With over 90% efficiency at half a watt into 8 Ω, it's ideal for portable and battery-powered audio projects. This plug-and-play STEMMA ...
