All Products
Showing 21-40 of 100 products
Little Bird Breakout Board for XBee Module
A simple breakout board for XBee modules that brings all 20 pins out to standard 0.1″ (2.54 mm) dual-row headers. The 0.5″ spacing between header rows makes it breadboard DIP-friendly for easy prototyping. Key Features All 20 Pins Broken Out – Full access to every XBee pin 0.1″ Header Spacing...
Yahboom Smartduino starter kit and smart robot 2in1 for Arduino Uno R3 compatible with Scratch3.0
The Yahboom Smartduino is a 2-in-1 Arduino starter kit and smart robot car based on the Arduino Uno R3. It comes with a high-quality integrated circuit board chassis, two breadboard platforms, and a comprehensive collection of sensors and components — letting you work through 20 beginner electron...
Yahboom Uno IO expansion board compatible with Arduino
An I/O expansion shield for the Arduino UNO R3 that breaks out every pin with its own VCC and GND, making it simple to connect multiple sensors and modules simultaneously. Stacks directly on top of the UNO with both female sockets and pin headers available for flexible wiring with male or female ...
Raspberry Pi Pico/Pico W Breadboard Kit With 2.8 Inch Touch Screen Display LED Indicator On Board
A breakout board for the Raspberry Pi Pico and Pico W that brings out all GPIO pins with clearly labelled silk screen, adds a 2.8-inch SPI touch screen display, and includes onboard buttons, LED indicators, and a buzzer. It provides a complete prototyping environment for Pico-based projects witho...
40 pin 30CM Jumper wire F/M
A 40-pin ribbon of female-to-male (F/M) jumper wires, 30cm long, in ten rainbow colours. The wires fit standard 0.1″ (2.54mm) pitch headers and can be kept as a ribbon for neat harnesses or separated into individual jumpers. Key Features Female-to-Male (F/M) – 0.1″ female header on one end, ma...
40 pin 30CM Jumper wire F/F
A 40-pin ribbon of female-to-female (F/F) jumper wires, 30cm long, in ten rainbow colours. The wires fit standard 0.1″ (2.54mm) pitch headers and can be kept as a ribbon for neat harnesses or separated into individual jumpers. Key Features Female-to-Female (F/F) – 0.1″ female header contacts o...
40 pin 30CM Jumper wire M/M
A 40-pin ribbon of male-to-male (M/M) jumper wires, 30cm long, in ten rainbow colours. The wires fit standard 0.1″ (2.54mm) pitch headers and can be kept as a ribbon for neat harnesses or separated into individual jumpers. Key Features Male-to-Male (M/M) – 0.1″ male header pins on both ends 4...
18650 Battery holder without DC connector
A single-cell 18650 battery holder with bare wire leads, designed for easy integration of 18650 lithium-ion cells into your electronics projects. Simply drop in a battery and connect the leads — no soldering or connectors required. Key Features Single 18650 Cell – Holds one standard 18650 batt...
100 Ohm 0.5 Watt Metal Film Resistors - Pack of 8
A pack of 8 metal film resistors rated at 100Ω and 0.5W. Despite the half-watt power rating, these are the same physical size as standard 1/4W carbon film resistors, making them a direct drop-in replacement with double the power handling. Key Features 100Ω, 0.5W – Higher power rating in a stan...
Raspberry Pi Pico Clear Acrylic Case
This clear acrylic case for the Raspberry Pi Pico will give you an extra level of protection on your Pico board. It is compatible with expander and breadboard use.
Raspberry Pi 40 Pin GPIO Double Expansion Board
The Raspberry Pi 40-Pin GPIO Double Expansion Board splits your Pi's single GPIO header into two, letting you connect multiple HATs, breakout boards, or accessories simultaneously without stacking conflicts. Simply connect it to your Raspberry Pi's 40-pin header, and you'll have two full GPIO br...
DHT22 module with cable
The DHT22 (also known in Australia by RHT03) is a low cost humidity and temperature sensor with a single wire digital interface. The sensor comes pre-calibrated and in a breadboard compatible module form so you don't need any extra components to immediately start measuring relative humidity an...
40 pin 15CM Jumper wire M/M
A 40-pin ribbon of male-to-male (M/M) jumper wires, 15cm long, in ten rainbow colours. The wires fit standard 0.1″ (2.54mm) pitch headers and can be kept as a ribbon for neat harnesses or separated into individual jumpers. Key Features Male-to-Male (M/M) – 0.1″ male header pins on both ends 4...
RGB LED Module
This RGB LED module gives your microcontroller project a simple way to add full-colour light. It uses a common-cathode through-hole RGB LED, with separate red, green and blue channels for mixing colours.Each colour channel has a built-in current-limiting resistor, helping protect the LED from bur...
Bulk - trim potentiometer -10 Pack
A 10-pack of 10 kΩ trim potentiometers, perfect for breadboarding and prototyping. They feature a long, grippy adjustment knob and 0.1″ pin spacing that plugs directly into breadboards or perfboards with ease. Specifications Resistance – 10 kΩ Pin Spacing – 0.1″ (2.54 mm), breadboard compatib...
0.1 (2.54mm) Crimp Connector Housing: 1x7-Pin 10-Pack
These 1×7-pin crimp connector housings let you quickly build custom cables that mate with standard 0.1" (2.54mm) spaced connectors. Pair them with pre-crimped terminal wires to create reliable, removable seven-wire connections in a single inline housing. Compatible with male and female headers, ...
0.1 (2.54mm) Crimp Connector Housing: 1x9-Pin 5-Pack
These 1×9-pin crimp connector housings let you quickly build custom cables that mate with standard 0.1" (2.54mm) spaced connectors. Pair them with pre-crimped terminal wires to create reliable, removable nine-wire connections in a single inline housing. Compatible with male and female headers, s...
0.1 (2.54mm) Crimp Connector Housing: 1x10-Pin 5-Pack
These ten-pin crimp connector housings let you quickly build custom cables that mate with standard 0.1" (2.54mm) spaced connectors. Pair them with pre-crimped terminal wires to create reliable, removable multi-wire connections in a single inline housing. Compatible with male and female headers, ...
0.1 (2.54mm) Crimp Connector Housing: 2x6-Pin 5-Pack
These 2×6-pin crimp connector housings let you quickly build custom cables that mate with standard 0.1" (2.54mm) spaced connectors. Pair them with pre-crimped terminal wires to create reliable, removable twelve-wire connections in a compact dual-row housing. Compatible with male and female dual-...
0.1 (2.54mm) Crimp Connector Housing: 2x7-Pin 5-Pack
These 2×7-pin crimp connector housings let you quickly build custom cables that mate with standard 0.1" (2.54mm) spaced connectors. Pair them with pre-crimped terminal wires to create reliable, removable fourteen-wire connections in a compact dual-row housing. Compatible with male and female dua...