Little Bird
Raspberry Pi Pico/Pico W Breadboard Kit With 2.8 Inch Touch Screen Display LED Indicator On Board
All Products
Circuitry Accessories
Displays
New Arrivals
Breadboards
Circuitry & IOT
Raspberry Pi
Brands and Manufacturers
Electronics Kits
Raspberry Pi Pico
Touchscreens
Digital Technologies
Displays & Screens
Prototyping & Wiring
Little Bird Electronics
$51.55
|
Out of stock
A breakout board for the Raspberry Pi Pico and Pico W that brings out all GPIO pins with clearly labelled silk screen, adds a 2.8-inch SPI touch screen displ...
Get notified when back in stock
Estimated Delivery
Arrives
Disclaimer
Secure checkout
A breakout board for the Raspberry Pi Pico and Pico W that brings out all GPIO pins with clearly labelled silk screen, adds a 2.8-inch SPI touch screen display, and includes onboard buttons, LED indicators, and a buzzer. It provides a complete prototyping environment for Pico-based projects without the need for a separate breadboard.
Key Features
- 2.8-Inch Touch Screen – ILI9341 SPI display for graphical output and touch input
- All GPIOs Broken Out – Every Pico pin accessible with clear silk-screen labels
- Onboard Peripherals – Buzzer, buttons, and LED indicators built in
- Additional Power Pins – Extra power rails for connecting external components
- Easy Assembly – M2.5 mounting hardware included
- Pico and Pico W Compatible – Works with both standard and wireless variants
Specifications
- Display – 2.8-inch ILI9341, SPI interface at 40 MHz
- Dimensions – 79 × 145 mm
Ideal For
- Raspberry Pi Pico prototyping and development
- MicroPython and CircuitPython GUI projects
- DIY embedded projects requiring a touch display
- Learning GPIO interfacing and SPI communication
Package Contents
- 1× Pico Breadboard Kit with 2.8-inch Touch Screen
Note: Raspberry Pi Pico is not included and must be purchased separately.
Resources
Jargon buster
Plain-language definitions for the technical terms used above.
- breakout
- A breakout board carries a small or fine-pitched component and brings its connections out to standard, breadboard- and header-friendly pins. Describing a part as a breakout means it can be wired into a project without soldering directly to the component's tiny contacts.
- CircuitPython
- A beginner-friendly version of Python designed to run directly on microcontroller boards. If a product supports CircuitPython, you can often program it by copying code files onto the board rather than setting up a more complex toolchain.
- GPIO
- General-purpose input/output pins are microcontroller pins you can set in software to read signals, switch devices on and off, or connect to peripherals. The number of GPIO pins matters because it limits how many buttons, LEDs, sensors, and other parts you can wire directly to the board.
- LED
- A light-emitting diode (LED) is a small electronic component that emits light when current flows through it in the correct direction. Because it only conducts one way, its polarity matters, and a through-hole LED must be soldered the correct way around to light up.
- M2.5
- A metric screw thread size with a 2.5 mm nominal diameter. It matters for mounting because screws, standoffs, and holes must use the same size to fit securely without damaging the board.
- MicroPython
- A version of the Python programming language made to run on microcontrollers. It matters because it lets beginners write readable code to control LEDs, sensors, motors and displays without needing to start with lower-level languages.
- SPI
- A fast serial communication bus often used for displays, memory cards, and sensors. It matters because SPI devices need specific pins for clock and data, plus a separate chip-select line for each device.
Find this product in
Displays & Screens
