All Products
AI Overview
These results are for Raspberry Pi HAT (Hardware Attached on Top) accessories—not wearable hats. For mounting/stacking Pi HATs and getting extra clearance:
HAT mounting + clearance hardware
- Add clearance between your Pi and HAT: 2x20 Socket Riser Header for Raspberry Pi HATs and Bonnets (2×20, longer pins) ($4.60)
- Stack HATs while keeping GPIO accessible: Stackable 0.100" Female Header with Extra 0.3" Spacer: 2x20-pin, Straight (2×20, stackable with extra spacer) ($5.45)
- Another tall GPIO extension option: Tall 2x20 Female GPIO Header (PTH, 0.1in) (2×20, tall female header) ($4.60)
Standoffs (secure the HAT to the Pi)
- Budget standoff pack: Brass M2.5 Standoffs for Pi HATs - Black Plated - Pack of 2 (M2.5, black plated, pack of 2) ($1.80)
- Alternative standoff pack: M2.5 Standoffs for Pi HATs - Black Plated - Pack of 2 (M2.5, black plated, pack of 2) ($3.40)
Low-profile cooling that fits under many HATs
- For Raspberry Pi 4: XL Raspberry Pi 4 Heatsink - Black (5 mm tall, designed to fit under most HATs) ($3.90)
- For Raspberry Pi 3: Raspberry Pi 3 Heatsink - 6mm (works with HATs) (6 mm heatsink height) ($2.35)
Example Raspberry Pi HAT-based add-ons (if you meant HAT boards)
- Cellular connectivity: EM06-E LTE Cat-6 HAT for Raspberry Pi, Dual Antennas LTE-A, Multi Regions Multi Band, GNSS (LTE Cat-6, dual antennas, GNSS) ($174.10)
- LoRa gateway kit: 8-Channel 915MHz LoRa Gateway Kit with GPS HAT for Raspberry Pi 4 (8-channel, 915 MHz, GPS HAT, made for Pi 4) ($453.41)
Did you mean Raspberry Pi HAT add-on boards (Hardware Attached on Top) or wearable hats?
Showing 21-40 of 100 products
Raspberry Pi 400
MPN: SC0513
Pibow 3 A+ Coupé (for Raspberry Pi 3 A+) - Coupé Rainbow
pHAT Stack - PCB Only
Raspberry Pi Zero WH Starter Kit
Black Nylon Screw and Stand-off Set – M2.5 Thread
Timber Pibow - Enclosure for Raspberry Pi Model B+ Computers
Gravity:Digital Push Button (Yellow)
Raspberry Pi Zero W Starter Pack - Includes Pi Zero W
Raspberry Pi Zero W Budget Pack - Includes Pi Zero W
Raspberry Pi Zero W Basic Pack - Includes Pi Zero W
Aluminum Standoff for Raspberry Pi: 11mm Length, 6mm M2.5 Thread, M-F (4-Pack)
Open source hardware - Skill badge, iron-on patch
Raspberry Pi GPIO Ribbon Cable - 40-pin, 6 (RPi 3, RPi2, B+)
0.100 (2.54 mm) Female Header: 2x20-Pin, Straight
Mini Aluminum Heat Sink for Raspberry Pi - 13 x 13 x 3mm
Aluminum Heat Sink for Raspberry Pi 3 - 14 x 14 x 8mm
Aluminum Heat Sink for Raspberry Pi 3 - 15 x 15 x 15mm
Gravity: Digital Push Button (Red)
Gravity:Digital Push Button (White)
EL Wire 2xAA Pocket Inverter
Raspberry Pi 400
·
The Raspberry Pi 400 is a complete personal computer built into a compact keyboard. Powered by a 1.8 GHz quad-core ARM Cortex-A72 processor (a faster variant of the Raspberry Pi 4), it delivers desktop-class performance — just connect a monitor, mouse, and power supply to get started. With dual ...
Pibow 3 A+ Coupé (for Raspberry Pi 3 A+) - Coupé Rainbow
The Pibow 3 A+ Coupé in Rainbow is a slim, colourful case designed specifically for the Raspberry Pi 3 A+. Crafted from five layers of laser-cut, high-quality cast acrylic, it securely houses your Pi while leaving all ports, camera connector, display connector, and GPIO fully accessible. With a ...
pHAT Stack - PCB Only
A preposterous pile of peripherals on your Pi! Mix and match 3 HATs or 5 pHATs into a platter of functionality. Use pHAT Stack for specific setups and projects, or just as a handy way to use several HATs or pHATs at once. pHAT Stack is the big brother to the Mini Black HAT Hack3r. It h...
Raspberry Pi Zero WH Starter Kit
The Raspberry Pi Zero WH Starter Kit has everything you need to get started on your Raspberry Pi Zero WH project.With black headers already soldered on you can get straight into adding Hats or jumper wires to connect up your project.Kit includesRaspberry Pi Zero WHClear Zero Case with GPIO spa...
Black Nylon Screw and Stand-off Set – M2.5 Thread
Totaling 380 pieces, this M2.5 Screw Set is a must-have for your workstation. You'll have enough screws, nuts, and hex standoffs to fuel your maker tendencies for days on end! M2.5 size screws fit almost all of the Adafruit breakout/dev board mounting holes (2.5mm or 0.1" drill holes). Works g...
Timber Pibow - Enclosure for Raspberry Pi Model B+ Computers
The Timber Pibow is a layered wood enclosure from Pimoroni for the Raspberry Pi 1 Model B+. Crafted from high-quality wood with transparent acrylic top and base layers, it provides a natural, elegant look while protecting the board. An extension layer is included for stacking HATs or other access...
Gravity:Digital Push Button (Yellow)
Press to release pleasure! Our redesigned digital push buttons come with LED, immersion gold surface, and bright colored hats. A captital D at left corner indicates that it is a digital sensor. An illustration of button painted in the back notifying its function. Pressing it is a real fun, espec...
Raspberry Pi Zero W Starter Pack - Includes Pi Zero W
Remember those cereal commercials that would always say, "part of a complete breakfast"? Well the Pi Zero's a lot like that bowl of cereal - while it's great on its own, you need a lot of accessories to make it a complete meal. The Pi Zero W Starter Pack is everything you ...
Raspberry Pi Zero W Budget Pack - Includes Pi Zero W
Remember those cereal commercials that would always say, "part of a complete breakfast"? Well the Pi Zero's a lot like that bowl of cereal - while it's great on its own, you need a lot of accessories to make it a complete meal. The Pi Zero W Budget Pack is almost everything...
Raspberry Pi Zero W Basic Pack - Includes Pi Zero W
Remember those cereal commercials that would always say, "part of a complete breakfast"? Well the Pi Zero's a lot like that bowl of cereal - while it's great on its own, you need a lot of accessories to make it a complete meal. The Pi Zero W Basic Pack is the barest of esse...
Aluminum Standoff for Raspberry Pi: 11mm Length, 6mm M2.5 Thread, M-F (4-Pack)
Hexagonal male-female aluminium standoffs designed specifically for the Raspberry Pi. The 11mm spacing is the ideal height for mounting expansion boards with standard-size female headers, and the M2.5 threads fit the Pi's mounting holes perfectly. Key Features Pi-Optimised Spacing – 11mm lengt...
Open source hardware - Skill badge, iron-on patch
Show your support for the open-source hardware movement with this embroidered iron-on patch featuring the Open Source Hardware (OSHW) logo. Originally created for the 2011 Open Hardware Summit, this badge is a great way to display your commitment to open design on bags, jackets, lab coats, or hat...
Raspberry Pi GPIO Ribbon Cable - 40-pin, 6 (RPi 3, RPi2, B+)
This 40-pin (2×20) flat ribbon cable connects to the GPIO header on the Raspberry Pi, providing easy access to all GPIO, I2C, SPI, UART, and power pins. The 6-inch (15 cm) length keeps things tidy while giving you room to work with breadboards, breakout boards, and HATs. The cable uses standard ...
0.100 (2.54 mm) Female Header: 2x20-Pin, Straight
The 0.100″ (2.54 mm) 2×20-Pin Straight Female Header is a double-row, 40-pin socket strip designed to mate with standard 0.1″ pitch male headers. This is the standard GPIO header size used on Raspberry Pi and other single-board computers, making it an essential connector for SBC projects. The 2×...
Mini Aluminum Heat Sink for Raspberry Pi - 13 x 13 x 3mm
Looking for an ultra-thin heat sink for your Raspberry Pi 3? Check out this nice and slim 13x13x3mm Heat Sink! This heat sink is made from high quality aluminum and will work perfectly with any Raspberry Pi but is best paired with a Raspberry Pi 3 since it can run a little hot....
Aluminum Heat Sink for Raspberry Pi 3 - 14 x 14 x 8mm
A compact aluminium heatsink with pre-applied thermal adhesive for easy installation on the Raspberry Pi 3 and other single board computers. Simply peel off the protective film and press firmly onto the processor — no additional thermal paste or clips required. In testing, a Raspberry Pi 3 witho...
Aluminum Heat Sink for Raspberry Pi 3 - 15 x 15 x 15mm
A tall-profile aluminium heatsink with pre-applied thermal adhesive for easy installation on the Raspberry Pi 3 and other single board computers. The taller 15mm height provides greater surface area for improved heat dissipation compared to shorter heatsinks. Simply peel off the protective film a...
Gravity: Digital Push Button (Red)
Press to release pleasure! Our redesigned digital push buttons come with LED, immersion gold surface, and bright colored hats. A captital D at left corner indicates that it is a digital sensor. An illustration of button painted in the back notifying its function. Pressing it is a real fun, esp...
Gravity:Digital Push Button (White)
Press to release pleasure! Our redesigned digital push buttons come with LED, immersion gold surface, and bright colored hats. A captital D at left corner indicates that it is a digital sensor. An illustration of button painted in the back notifying its function. Pressing it is a real fun, esp...
EL Wire 2xAA Pocket Inverter
This inverter is the most common way to power EL wire because they tend to be cheap and batteries generally last a long time. 2 AA Batteries can power an 2.5m strand of EL Wire for about 8-10 hours.We recomend you use the rechargeable batteries, though the operating time might be less. It comes ...
