All Products

SKU: AF-2028 · MPN: 2028

This is the assembled version of the Pi T-Cobbler Plus.  It only works with the Raspberry Pi Model Zero, A+, B+, Pi 2,Pi 3! (Any Pi with 2x20 connector)The Raspberry Pi has landed on the Maker World like a 40-GPIO pinned, quad-USB ported, credit card sized bomb of DIY joy. And while you ...

SKU: AF-2423 · MPN: 2423

The Adafruit PiTFT Plus 2.8" Capacitive Touchscreen is a finger-friendly colour display for the Raspberry Pi. Unlike resistive touchscreens that need a stylus or fingernail, this capacitive version responds to a light finger touch and features a polished black bezel with a glass overlay for a cle...

SKU: PI-CAB0503

A 26-pin (2×13) GPIO ribbon cable for connecting the original Raspberry Pi Model A or Model B to breakout boards, breadboards, and other PCBs. Pin 1 is marked with a red wire for easy orientation. Note: This cable is only compatible with the original Raspberry Pi Model A and Model B (26-pin GPI...

SKU: PI-CAB0504

A 26-pin (2×13) GPIO ribbon cable for connecting the original Raspberry Pi Model A or Model B to breakout boards, breadboards, and other PCBs. Pin 1 is marked with a red wire for easy orientation. Note: This cable is only compatible with the original Raspberry Pi Model A and Model B (26-pin GPI...

SKU: SF-CAB-13028

This 40-pin (2×20) flat ribbon cable connects to the GPIO header on the Raspberry Pi, providing easy access to all GPIO, I2C, SPI, UART, and power pins. The 6-inch (15 cm) length keeps things tidy while giving you room to work with breadboards, breakout boards, and HATs. The cable uses standard ...

SKU: PI-RPI-027

The 7” Touchscreen Monitor for Raspberry Pi gives users the ability to create all-in-one, integrated projects such as tablets, infotainment systems and embedded projects. The 800 x 480 display connects via an adapter board which handles power and signal conversion. Only two connections to the ...

SKU: LB-LR0387

This is the assembled version of the Pi T-Cobbler Plus.  It only works with the Raspberry Pi Model Zero, A+, B+, Pi 2, Pi 3 & Pi 4! (Any Pi with 2x20 connector)Each order comes with a 40 pin ribbon cable and assembled T-Cobbler Plus. You can plug the 40-pin GPIO cable between th...

SKU: AF-2455 · MPN: 2455

The Adafruit PiTFT 2.4" HAT Mini Kit is a compact colour touchscreen display that plugs directly onto your Raspberry Pi's GPIO header. Featuring a 2.4-inch 320×240 pixel TFT with 16-bit colour and a resistive touch overlay, it's ideal for building interactive interfaces, mini consoles, or portabl...

SKU: AF-1754 · MPN: 1754

The Adafruit Pi T-Cobbler breaks out all the power, GPIO, I2C and SPI pins from the Raspberry Pi's 26-pin header onto a solderless breadboard in a T-shaped layout. The wider T-shape makes the pin labels easier to read compared to the compact Cobbler. Comes fully assembled with a 26-pin ribbon cab...

SKU: AF-2718 · MPN: 2718

The 7” Touchscreen Display for Raspberry Pi gives users the ability to create all-in-one, integrated projects such as tablets, infotainment systems and embedded projects! The 800x480 display connects via an adapter board which handles power and signal conversion. Only two connections to the Pi...

SKU: AF-2029 · MPN: 2029

The Raspberry Pi B+/Pi 2/ Pi 3 has landed on the Maker World like a 40-GPIO pinned, quad-USB ported, credit card sized bomb of DIY joy. And while you can use most of our great Model B accessories by hooking up our downgrade cable, its probably a good time to upgrade your set up and accessorize...

SKU: PI-CAB0505

A 175mm black GPIO ribbon cable for Raspberry Pi, with 40-pin female IDC connectors on both ends. Bridges your Pi's GPIO header out to a breakout board, breadboard adapter, or custom PCB. Pin 1 is marked with a white/pink wire for correct orientation. Key Features Female-to-Female – 2×20 IDC s...

SKU: PI-CAB0506

A 175mm grey GPIO ribbon cable for Raspberry Pi, with 40-pin female IDC connectors on both ends. Bridges your Pi's GPIO header out to a breakout board, breadboard adapter, or custom PCB. Pin 1 is marked with a white/pink wire for correct orientation. Key Features Female-to-Female – 2×20 IDC so...

SKU: AF-2250 · MPN: 2250

An orange polycarbonate case base for the Raspberry Pi Model B+, Pi 2, Pi 3 Model B, and Pi 3 Model B+. The snap-together design lets you mix and match coloured lids and bases for custom combinations. This listing is for the base only — lids are available separately. Made from durable, glossy po...

SKU: AF-2258 · MPN: 2258

The Adafruit Raspberry Pi B+ / Pi 2 / Pi 3 Case is a durable polycarbonate enclosure with a smoke-tinted base and clear top. Designed by Mike Doell, it offers a clean, professional look while keeping your Pi protected and fully accessible. The case features slim openings for all cables, a bevell...

SKU: AF-1993 · MPN: 1993

This 2×20 (40-pin) IDC box header is the matching connector for 40-pin GPIO ribbon cables used with Raspberry Pi models that have a 40-pin GPIO header. Solder it onto perfboard to create a breakout point for your Pi's GPIO, or use it in any custom PCB design. Key Features 40-Pin (2×20) – Match...

SKU: AF-2359 · MPN: 2359

The Adafruit Raspberry Pi A+ Case is a slim, durable polycarbonate enclosure designed specifically for the Raspberry Pi Model A+. With a smoke-tinted base and clear top, it offers a clean, professional look while keeping your Pi protected and accessible. Designed by Mike Doell, the case features...

SKU: AF-2280 · MPN: 2280

The Adafruit Pi Box Plus is a crystal-clear acrylic enclosure designed specifically for the Raspberry Pi Model A+. Six laser-cut pieces slide together and secure with four screws for a sturdy, professional-looking build. A hinged top provides easy access to GPIO and onboard headers, while built-i...

SKU: RP-SC1227 · MPN: SC1227

The official Raspberry Pi 7" Touchscreen Display enables all-in-one projects like tablets, infotainment systems, kiosks, and embedded devices. The 800×480 capacitive touchscreen supports 10-finger touch and connects directly to your Pi's DSI port. With touchscreen drivers built into Raspberry Pi...

SKU: DF-FIT0417

A premium CNC-machined aluminium case for the Raspberry Pi B+, 2 Model B, and 3 Model B. Features anodic oxidation processing for a durable, professional finish with high-precision dimensions for a perfect fit. The grooved bottom design provides easy access for GPIO ribbon cables. Key Features ...