All Products

SKU: DF-DFR0575

Is FireBeetle-ESP32 too big for your projects? Why not try our newly launched Beetle-ESP32. This Beetle-ESP32 Microcontroller of 1.38”×1.34”small size is a simplified version of FireBeetle-ESP32 and specially designed for electronic engineering fans and DIY lovers. It is equipped with 4 analog po...

SKU: DF-DFR0959

Designed by Raspberry Pi, RP2040 features a dual-core ARM Cortex-M0+ processor with up to 133MHz clock and 264KB internal RAM, and supports USB 1.1 devices, which allows users to focus on function implementation instead of spending too much time and effort on improving codes. DFRobot Beetle RP20...

SKU: DF-DFR1188 · MPN: DFR1188

The Beetle RP2350 is a coin-sized development board built around the Raspberry Pi RP2350 microcontroller with a unique dual-core, dual-architecture design. Choose between ARM Cortex-M33 or Hazard3 RISC-V cores running at 150 MHz, with 520 KB of RAM and 2 MB of flash — delivering serious processin...

SKU: DF-DFR0285

The Beetle shield is designed to attach a Beetle (DFR0282) controller for easy connecting servos and sensors. ​ SPECIFICATIONS Operating voltage: 3 - 5V Compatible with DFRobot Beetle DOCUMENTS Wiki( Beetle shield) SHIPPING LIST ...

SKU: DF-DFR0282

The Beetle is one of the smallest Arduino Leonardo-compatible boards available, built around the ATmega32U4 microcontroller running at 16MHz. Despite its tiny size, it delivers the full functionality of an Arduino Leonardo with 10 digital pins, 5 analogue pins, and 4 PWM outputs. With a built-in...

SKU: EC-ACK02125K

This Basic Kit for Arduino is the perfect kit for you to dive into the electronics and Arduino world. It includes the Crowduino mainboard and the most popular accessories for a first-time user to learn about the Arduino hardware, software and general electronics theory. The detailed guide book...

SKU: DF-DFR0100

INTRODUCTION Welcome to the electronic interaction world! DFRobot proudly presents the Arduino Beginner/Starter Kit for those who are interested in learning about Arduino and electronics. Starting from basic LED control to more advanced environmental sensing, monitoring and actuators. This ki...

SKU: JU-W-LP229

Show off your love of science and discovery with this beautifully crafted microscope-shaped enamel pin from Jubly-Umph. A reminder to stay curious and always question the world around you. This colourful, gold-backed hard enamel pin comes presented on a Jubly-Umph backing card and is part of a l...

SKU: SF-SEN-15244

The Bend Labs Digital Flex Sensors are an innovative solution for measuring motion, providing a unique alternative to existing sensor technologies for measuring a highly accurate and drift-free angular displacement in a soft form factor while maintaining extremely low power consumption. Construct...

SKU: JU-W-LP187

These last few years have been filled with negativity, whether it be about politics, healthcare, economics, or one of a million other topics. If there's one thing to try and remember that'll help us through the next little difficult period, it's to be compassionate and empathetic to those around ...

SKU: PR-PIM375

A really sophisticated and accurate colour and luminance sensor breakout that's Raspberry Pi and Arduino compatible. As well as detecting RGB colour and light level, it has added bells and whistles like 50/60Hz light noise rejection, a wide detection range, and two illumination LEDs. T...

SKU: AF-1721

A 24-bar bi-colour (red/green) LED bargraph kit with an I²C backpack controller. The backpack handles all LED multiplexing and drive, letting you control 48 LEDs (24 bars × 2 colours) from just two I²C pins. Constant-current drivers ensure bright, consistent colour across all segments with 1/16-s...

SKU: AF-796

We looked long and hard for a high-quality, sturdy, durable-latching parts box and we have it! This handy box has outer dimensions of 6.25" x 3.5" (159mm x 89mm) - 4.1" including hinges (104mm), long compartments are 3.35" x 1.15" (85 x 29mm) and for short compartments are 1.65" x 1.15" (42 x 29m...

SKU: SF-COM-11274

It’s the end of the world, and you need a button to press. This is it. A 100mm diameter (outside diameter) dome illuminated push button comes with an LED, securing nut and a pre-installed long life horizontal microswitch. Button can also be adjusted to a low profile button by removing the midd...

SKU: SF-COM-11275

It’s the end of the world, and you need a button to press. This is it. A 100mm diameter (outside diameter) dome illuminated push button comes with an LED, securing nut and a pre-installed long life horizontal microswitch. Button can also be adjusted to a low profile button by removing the midd...

SKU: SF-COM-09181

It’s the end of the world, and you need a button to press. This is it. A 100mm diameter (outside diameter) dome illuminated push button comes with an LED, securing nut and a pre-installed long life horizontal microswitch. Button can also be adjusted to a low profile button by removing the midd...

SKU: SF-COM-11273

This large 100 mm yellow dome pushbutton is hard to miss and satisfying to press. It features a built-in LED indicator, a pre-installed long-life microswitch, and a polycarbonate lens cap for optical clarity. The height can be adjusted to a low-profile configuration by removing the middle ring. ...

SKU: SF-ROB-12859

The Big Easy Driver is a stepper motor driver board for bipolar stepper motors up to 2 A per phase, based on the Allegro A4988 driver chip. Designed by Brian Schmalz, it's the successor to the popular Easy Driver board. It defaults to 16-step microstepping mode and includes onboard 5 V and 3.3 V...

SKU: LB-LS7008-B

Bring the drama of game shows, the hype of hackathons, or the focus of “emergency stop” buttons right to your desktop! The Big Game Button is your project’s new MVP — a monster 100mm blue button in a tough plastic shell, with USB plug-and-play goodness.Why You’ll Love It Game-Show Style, Maker A...

SKU: LB-LS7008-G

Bring the drama of game shows, the hype of hackathons, or the focus of “emergency stop” buttons right to your desktop! The Big Game Button is your project’s new MVP — a monster 100mm green button in a tough plastic shell, with USB plug-and-play goodness.Why You’ll Love It Game-Show Style, Maker ...