All Products

SKU: AF-4976

A matching pair of 1.25 mm pitch cables with 8-pin connectors — one inline socket and one plug — that friction-lock together for a secure, reliable connection. Each cable is 10 cm long, making them well suited for tight enclosures and compact builds. Compatible with Molex PicoBlade connectors an...

SKU: AF-4929

A slim, reliable 1.25 mm pitch cable with 9-pin connectors on both ends and a 20 cm length. The friction-lock connectors provide a secure, satisfying click for lightweight connectivity where standard 0.1" headers or JST PH connectors are too bulky. This cable uses 1:N reversed wiring, meaning pi...

SKU: WS-24691

A compact 1.27-inch RGB OLED display module featuring 128×96 resolution and 262K colours for clear, vibrant visuals. Built around the SSD1351 driver chip with an SPI interface, it requires minimal IO pins and is straightforward to integrate into your projects. Waveshare provides online developme...

SKU: RP-SC0744L

A 128GB Class 10 microSD card pre-loaded with the latest Raspberry Pi OS. Simply insert the card into your Raspberry Pi, power on, and you're ready to go — no manual imaging or downloading required. Compatible with all Raspberry Pi models including the Raspberry Pi 5. These cards are tested by t...

SKU: WS-24155

A 1.28-inch round IPS LCD display module with an integrated capacitive touch panel. Featuring 240×240 resolution and 65K colours, the circular form factor is ideal for smartwatch-style interfaces, gauge displays, and interactive dashboards. Built around the GC9A01 display driver (SPI) and CST816...

SKU: WS-13992

A 1.5-inch OLED display module with 128×128 pixel resolution and 16-level greyscale, driven by the SSD1327 controller. Communicates via SPI or I2C interface (selectable via onboard resistor), and operates at both 3.3V and 5V logic levels. With a wide viewing angle of over 160° and true OLED cont...

SKU: DF-FIT0021

A 128×64 pixel graphic LCD module driven by the ST7920 controller. This display supports English characters, Chinese characters, and custom graphics over both serial (SPI) and parallel interfaces, making it a versatile choice for Arduino projects that need more than a simple character display. T...

SKU: AF-1818

This 1.2″ 8×8 LED Matrix features 64 amber LEDs arranged in a square grid, perfect for building scrolling signs, simple animations, or small pixel displays. The compact package plugs directly into a breadboard with 0.1″ pin spacing — eight pins on each side. The matrix requires 1:8 multiplex dri...

SKU: AF-1817

This 1.2″ 8×8 LED Matrix features 64 blue LEDs arranged in a square grid, perfect for building scrolling signs, simple animations, or small pixel displays. The compact package plugs directly into a breadboard with 0.1″ pin spacing — eight pins on each side. The matrix requires 1:8 multiplex driv...

SKU: AF-1821

This 1.2″ 8×8 LED Matrix features 64 bright white LEDs arranged in a square grid, perfect for building scrolling signs, simple animations, or small pixel displays. The compact package plugs directly into a breadboard with 0.1″ pin spacing — eight pins on each side. The matrix requires 1:8 multip...

SKU: AF-1819

This 1.2″ 8×8 LED Matrix features 64 yellow LEDs arranged in a square grid, perfect for building scrolling signs, simple animations, or small pixel displays. The compact package plugs directly into a breadboard with 0.1″ pin spacing — eight pins on each side. The matrix requires 1:8 multiplex dr...

SKU: AF-2214

A 12.000MHz quartz crystal in a standard HC49/US short-style package with two 20pF load capacitors included. The crystal has 30PPM tolerance and 50PPM stability, making it precise enough for USB timing, long-term timekeeping, and RF/PLL/VCO applications. The breadboard-friendly package works with...

SKU: AF-1868

A simple breakout board with a CR1220 coin cell battery holder pre-soldered and broken out to 0.1″ pitch pins. Ideal for powering very low-current projects or providing battery backup for a real-time clock (RTC) module. Comes fully assembled and tested, with a stick of 0.1″ header included so yo...

SKU: AF-1867

A breakout board with a CR1220 coin cell battery holder, an on/off switch, and 0.1″ pitch breakout pins. Ideal for powering very low-current projects or providing switchable battery backup for a real-time clock (RTC) module. The board breaks out four pins: two ground pins, one switched power pin...

SKU: LB-LR0589-BLACK

A 12 mm panel-mount momentary push button with a smooth dome-shaped cap in black. Normally open — pressing the button closes the contacts. The dome design provides a satisfying tactile feel and sits flush with the panel surface. Key Features Momentary Action – Normally open, closes on press 1...

SKU: LB-LR0589-BLUE

A 12 mm panel-mount momentary push button with a smooth dome-shaped cap in blue. Normally open — pressing the button closes the contacts. The dome design provides a satisfying tactile feel and sits flush with the panel surface. Key Features Momentary Action – Normally open, closes on press 12...

SKU: LB-LR0589-GREEN

A 12 mm panel-mount momentary push button with a smooth dome-shaped cap in green. Normally open — pressing the button closes the contacts. The dome design provides a satisfying tactile feel and sits flush with the panel surface. Key Features Momentary Action – Normally open, closes on press 1...

SKU: LB-LR0589-RED

A 12 mm panel-mount momentary push button with a smooth dome-shaped cap in red. Normally open — pressing the button closes the contacts. The dome design provides a satisfying tactile feel and sits flush with the panel surface. Key Features Momentary Action – Normally open, closes on press 12 ...

SKU: LB-LR0589-WHITE

A 12 mm panel-mount momentary push button with a smooth dome-shaped cap in white. Normally open — pressing the button closes the contacts. The dome design provides a satisfying tactile feel and sits flush with the panel surface. Key Features Momentary Action – Normally open, closes on press 1...

SKU: LB-LS3381-K

A 12 mm panel-mount momentary push button with a smooth dome-shaped cap in black, pre-wired with 20 cm red and black leads for easy connection. Normally open — pressing the button closes the contacts. Key Features Pre-Wired – 20 cm red and black leads attached, no soldering required Momentary...