Adafruit
1.25mm Pitch 5-pin Cable Matching Pair 10 cm long
This matching pair of 1.25 mm pitch 5-pin cables includes an inline socket and plug connector, providing a complete Molex PicoBlade-compatible connection set...
Get notified when back in stock
This matching pair of 1.25 mm pitch 5-pin cables includes an inline socket and plug connector, providing a complete Molex PicoBlade-compatible connection set. At 10 cm each, these short cables are ideal for tight enclosures and close-proximity board-to-board wiring.
The solid construction can carry a couple of amps of current, and the friction-lock connectors provide a secure, click-in mating that is easy to connect and disconnect.
Key Features
- Matching Pair – Includes both socket and plug connectors
- 1.25 mm Pitch – Ultra-slim alternative to 0.1″ and JST PH connectors
- Molex PicoBlade Compatible – Works with standard PicoBlade headers
- 10 cm Length – Short cables for tight enclosures
- Friction Lock – Secure, click-in connection
Specifications
- Pitch: 1.25 mm
- Pins: 5
- Length: 10 cm (each cable)
- Compatibility: Molex PicoBlade
Ideal For
- Short-distance board-to-board connections
- Compact enclosures and tight spaces
- SPI and multi-signal wiring
- Custom cable assemblies
Package Contents
- 1× 1.25 mm Pitch 5-Pin Socket Cable (10 cm)
- 1× 1.25 mm Pitch 5-Pin Plug Cable (10 cm)
Jargon buster
Plain-language definitions for the technical terms used above.
- Headers
- Rows of connector contacts on a fixed pitch (commonly 2.54 mm) used to link a board to a breadboard, jumper wires, or another board. They come as male pin headers and female socket headers; when a module ships with pre-soldered headers it can be used straight away, whereas bare pads require soldering the pins yourself.
- JST PH
- A small keyed plug-and-socket connector with 2 mm pin spacing, often used for low-power electronics connections. You need the correct JST PH cable, and its current rating limits how much power should be passed through it.
- SPI
- A fast serial communication bus often used for displays, memory cards, and sensors. It matters because SPI devices need specific pins for clock and data, plus a separate chip-select line for each device.
Find this product in
Prototyping & Wiring
